At CONMED, a Finishing Technician I is primarily responsible for producing parts that meet cosmetic requirements and standards.

Duties and Responsibilities:

• Operate Bead Blast Operations.
• Operate centrifugal finishing equipment.
• Operate Vibratory finishing equipment.
• Operate buffing equipment.
• Plug and mask parts per print for all mechanical and chemical finishing operations.
• Perform weighing and measuring operations to maintain bath concentrations as instructed and basic maintenance on all equipment.
• Perform Equipment PM’s
• Ability to produce parts with Zero defects
• Ability to read drawings and follow work instructions and procedures

REQUIRED QUALIFICATIONS:

• Minimum of one year of work experience, preferably in a manufacturing environment, specifically in finishing and/or coating processes.

PHYSICAL REQUIREMENTS:

• Work at a bench height of 37.5” to 42”
• Stand for up to eight hours per day
• Move about, bend, stoop, use hands, and lift up to 25 pounds unassisted
• Visual acuity of at least 20/40 in each eye (corrected or uncorrected) and ability to distinguish colors.
  This position is not eligible for employer-based visa sponsorship.

• Operate Bead Blast Operations.
• Operate centrifugal finishing equipment.
• Operate Vibratory finishing equipment.
• Operate buffing equipment.
• Plug and mask parts per print for all mechanical and chemical finishing operations.
• Perform weighing and measuring operations to maintain bath concentrations as instructed and basic maintenance on all equipment.
• Perform Equipment PM’s
• Ability to produce parts with Zero defects
• Ability to read drawings and follow work instructions and procedure