For more than 50 years, Power Device Corporation (PDC) has been recognized as a world leader in the design and manufacture of high-reliability Connectivity, Power, and Control solutions for the Aerospace, Defense, and Space industries. Our dedication to supplying quality products, on-time delivery, and superior support contributes to the success of our customers and the critical missions they serve. We are a dynamic, growing organization, looking to add valued contributing members to our team.
This position is 100% onsite at our Bohemia, NY location, and it requires a U.S Person or a person who can qualify for a Department of State or Department of Commerce License. Willing to provide relocation assistance.
The compensation for this role is $130,000 to $190,000 annually based on experience.

POSITION SUMMARY:

PDC is seeking a Principal Analog / Mixed Signal Design Engineer experienced in developing devices with active and passive signal conditioning & conversion, switching power control, driver, and filter circuits, that are implemented using chip & wire hybrid, or SMT-CCA construction.

Key Responsibilities:

• To take primary technical leadership in the design, management, and support for our motion control product lines:
• Synchro / Resolver to Digital converters
• DATEL A to D, and D to A converters
• Switched-mode multi-phase Brushless DC Motor (BLDC) drivers & controllers
• This role requires a deep understanding of analog / mixed signal circuit analysis and design techniques, to meet demanding dynamic range, EMI, noise and power specifications. The candidate should possess strong technical leadership, in order to drive our interdisciplinary Engineering team through all phases of product life cycle development- from requirements, architecture, and detailed design, through to design validation, device verification, qualification, including support for the handoffs to test and product manufacturing. Our product lines require continuous obsolescence review, with support for alternate part qualification or redesign, to help our military & aerospace customers manage the product life cycle.

Qualifying Experience:

• Bachelor’s degree in Electrical Engineering; Graduate Engineering degree preferred.
• Deep bench of Analog Circuit design:
• Multiple A to D architectures (multi-pass SAR, Flash, Sigma Delta, Pipeline) and D to A (serial DACs, R2R, current steering, charge scaling).
• Low noise and high dynamic range techniques, sample acquisition and hold circuits, Bandgap references.
• Oscillators, VCO’s, Op-amps, Switched Capacitor Circuits; Active Filters, single ended / common & differential mode circuits. PCB design techniques for low noise, low EMI, and high current.
• Type 2 control loops as used in Synchro to digital converters; resolver to synchro transformers, phase / frequency control loops, stability analysis. Comfortable with analysis in both time & frequency domains.
• Control theory and Matrix mathematics including Z domain transform for digital control; Clark and Park transform theory.
• Sensors / detectors- inductive, Hall, optical, LVDT, Synchro / Resolvers and Encoders.
• Proficient with CAD tools such as LT-Spice, P-Spice, OrCAD, Allegro and Pantheon.
• Analog / mixed signal ASIC design and verification using Cadence, Synopsis, or Siemens tool suites a plus.
• Power electronics / power management (Buck/Boost, LDO, Charge Pump, Inverters using MOSFET, IGBT, SiC and GaN devices).
• Motor control system simulation
• Space-level radiation hardened design for analog and digital circuits- rad lot testing, ionizing radiation, single event upset and total dose analysis regarding component selection.
• High level understanding of thermal, electrical stress, worst case, FMEA, tolerance, aging, and design for low EMI

ESSENTIAL DUTIES:

• Extract clear requirements and specs from marketing inputs, customer documents & meetings.
• Engage early with the customer, to guide requirements toward those that yield a more realizable, higher value product.
• Distill large-scale designs down to their architectural elements, and develop unique, innovative analog & digital hardware solutions. Consider & pursue patent applications as differentiators to secure our competitive advantage.
• Generate reports, present findings & provide continuous feedback to the team throughout the review process- good communication is essential.
• Develop creative approaches that favorably optimize complex design tradeoffs for: product cost, performance, feature set, time to market, and technical risk.
• Follow a defined design process, coordinating technical reviews with the associated disciplines to facilitate good DFM outcomes in terms of yields, cost and performance.
• Manage support and verification activities (thermal, electrical stress, worst-case, FMEA, tolerance, aging, and EMI analyses, performance simulations, and design verification) to ensure all requirements are met for the intended application.
• Develop project plans, budgets, schedules; identify the resources required to get from market requirement to product release. Identify risks and develop contingency plans to mitigate schedule / technical threats to the program.
• Provide technical guidance, including material and labor cost estimates to support winning tactical business opportunities and proposals.
• Mentor, coach, and train engineers to greater levels of technical and professional achievement.
• Adopt and support legacy product lines, resolving new vendor materials / product issues as they arise.
• Investigate new methods, processes, techniques, tools, components, and technologies that may lead to improvements in quality, timeliness, and efficiency.
• Conduct in-depth technical interviews and make hiring recommendations to further build out a capable and talented technical Engineering team.

Qualifying Experience:

• Bachelor’s degree in Electrical Engineering; Graduate Engineering degree preferred.
• Deep bench of Analog Circuit design:
• Multiple A to D architectures (multi-pass SAR, Flash, Sigma Delta, Pipeline) and D to A (serial DACs, R2R, current steering, charge scaling).
• Low noise and high dynamic range techniques, sample acquisition and hold circuits, Bandgap references.
• Oscillators, VCO’s, Op-amps, Switched Capacitor Circuits; Active Filters, single ended / common & differential mode circuits. PCB design techniques for low noise, low EMI, and high current.
• Type 2 control loops as used in Synchro to digital converters; resolver to synchro transformers, phase / frequency control loops, stability analysis. Comfortable with analysis in both time & frequency domains.
• Control theory and Matrix mathematics including Z domain transform for digital control; Clark and Park transform theory.
• Sensors / detectors- inductive, Hall, optical, LVDT, Synchro / Resolvers and Encoders.
• Proficient with CAD tools such as LT-Spice, P-Spice, OrCAD, Allegro and Pantheon.
• Analog / mixed signal ASIC design and verification using Cadence, Synopsis, or Siemens tool suites a plus.
• Power electronics / power management (Buck/Boost, LDO, Charge Pump, Inverters using MOSFET, IGBT, SiC and GaN devices).
• Motor control system simulation
• Space-level radiation hardened design for analog and digital circuits- rad lot testing, ionizing radiation, single event upset and total dose analysis regarding component selection.
• High level understanding of thermal, electrical stress, worst case, FMEA, tolerance, aging, and design for low EMI.

This job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee. This job description indicates, in general the nature and levels of work, knowledge, skills, abilities and other essential functions (as covered under the ADA) expected of the incumbent. Duties, responsibilities and activities may change at any time with or without notice as required.
Power Device Corporation is an Affirmative Action/Equal Opportunity Employer and is committed to providing equal employment opportunity (EEO) for all persons in all facets of employment. All qualified applicants will receive consideration for employment without regard to race, color, religion, age, gender, sexual orientation, gender identity, national origin, citizenship status, marital status, genetic information, disability, protected veteran status or any other legally protected status

Key Responsibilities:

• To take primary technical leadership in the design, management, and support for our motion control product lines:
• Synchro / Resolver to Digital converters
• DATEL A to D, and D to A converters
• Switched-mode multi-phase Brushless DC Motor (BLDC) drivers & controllers
• This role requires a deep understanding of analog / mixed signal circuit analysis and design techniques, to meet demanding dynamic range, EMI, noise and power specifications. The candidate should possess strong technical leadership, in order to drive our interdisciplinary Engineering team through all phases of product life cycle development- from requirements, architecture, and detailed design, through to design validation, device verification, qualification, including support for the handoffs to test and product manufacturing. Our product lines require continuous obsolescence review, with support for alternate part qualification or redesign, to help our military & aerospace customers manage the product life cycle