Y-Axis Jobs Logo
Send us feedback
telephone  +91 7670 800 001
Log in Sign up Try Premium

Aerotek Manufacturing Ltd Jobs overseas

About 13606 results in (3) seconds Clear Filters

Jobs Search

About 13606 results in (3) seconds
Manufacturing Engineering Intern (P-4927) at 10x Genomics
Pleasanton, California, United States - Full Time
Skills Needed
Manufacturing Engineering, Mechanical Engineering, Process Automation, Data Analysis, Technical Documentation, Project Management, Collaboration, Cad Software, Lean Manufacturing, Visual Inspection Systems, Liquid Handling Robotics
Specialization
Candidates must be currently enrolled as a Junior or Senior in an undergraduate program or be recent graduates in relevant engineering fields. Experience in process automation and the ability to document workflows and present proposals are also required.
Manufacturing Assembler - Inventory Control at HEICO Corporation
Tulsa, Oklahoma, United States - Full Time
Skills Needed
Assembly, Inventory Control, Documentation, Shop Tools, Traceability, Cycle Counts, Quality Adherence, Mechanical Skills, Blueprint Interpretation, Computer Skills, Mathematics, Organizational Skills, Communication, Detail Orientation, Problem Solving, Multi Tasking
Specialization
Candidates should have a high school diploma or equivalent and hands-on manufacturing experience, preferably in an inventory environment. They must be mechanically inclined, detail-oriented, and able to interpret specifications and blueprints.
MATERIAL HANDLER-MANUFACTURING (PTAC UNITS) at ICE AIR LLC
Duncan, South Carolina, United States - Full Time
Skills Needed
Material Handling, Inventory Management, Forklift Operation, Safety Compliance, Attention To Detail, Organizational Skills, Physical Stamina, Communication Skills, Quality Control, Continuous Improvement, Hvac Knowledge, Teamwork, Problem Solving, Time Management, Packaging, Labeling
Specialization
A high school diploma or GED is required, along with previous experience in a similar role preferred. Candidates must be able to lift up to 100 lbs and demonstrate strong attention to detail and organizational skills.
Staff Engineer, Manufacturing Engineering at Western Digital
Phra Nakhon Si Ayutthaya City Municipality, , Thailand - Full Time
Skills Needed
Process Engineering, Hga Manufacturing, Yield Management, Quality Control, Statistical Analysis, Data Interpretation, Mechanical Principles, Manufacturing Processes, Project Management, Technical Guidance, Collaboration, Process Improvement, Documentation, Communication, Mentorship, Self Development
Specialization
Candidates must have a Bachelor's degree in Mechanical Engineering or a related field and a minimum of 3 years of experience in process engineering, preferably in HGA manufacturing. A good understanding of statistical analysis and mechanical principles is preferred.
Experience Required
Minimum 2 year(s)
Punch Press Manufacturing Machine Operator at MORGAN ADVANCED MATERIALS & TECH I
Hayward, California, United States - Full Time
Skills Needed
Punch Press Operation, Machine Maintenance, Quality Inspection, Technical Drawings, Basic Computer Skills, Team Collaboration, Troubleshooting, Mechanical Aptitude, Production Data Recording, Safety Compliance, Attention To Detail, Fast Paced Environment, Communication Skills, Housekeeping, Continuous Improvement, Visual Inspection
Specialization
A high school diploma or equivalent is preferred, along with 1-3 years of experience operating punch press or similar machinery. Basic computer skills, good communication skills, and the ability to read drawings and use precision measuring instruments are also required.
Senior Machine Shop Manufacturing Engineer at JOBY AERO INC
Santa Cruz, California, United States - Full Time
Skills Needed
Mechanical Design Fundamentals, Machining Processes, Design For Manufacturability, Drawing Standards, Cad Systems, Cam Programming, Welding Processes, Waterjet Manufacturing, Metallic Materials, Engineering Decisions, Prototype Manufacturing, Custom Fixtures, Aerospace Hardware, Test Hardware Development
Specialization
Candidates must have a Bachelor's degree in Mechanical or Manufacturing Engineering and at least 5 years of experience in machining operations. A strong understanding of mechanical design fundamentals, machining processes, and design for manufacturability is required.
Experience Required
Minimum 5 year(s)
Food Manufacturing Machine Operator - Days at Lactalis US Yogurt, Inc.
Londonderry, New Hampshire, United States - Full Time
Skills Needed
Manufacturing Experience, Safety Compliance, Product Quality, Line Efficiency, Communication Skills, Teamwork, Adaptability, Computer Literacy
Specialization
Qualified applicants should have 1-2 years of experience in a manufacturing environment and the ability to work a 12-hour schedule. They must also be able to lift 50 lbs, possess solid communication skills, and be computer literate.
Senior NDE Engineer, Additive Manufacturing at Relativity Space
Long Beach, California, United States - Full Time
Skills Needed
Nde Methods, Additive Manufacturing, Materials Characterization, Non Destructive Evaluation, Manufacturing Environment, Design Of Experiments, Data Analysis, Technical Presentations, Statistical Pipelines, Fatigue Properties, Welding Processes, Aluminums, Ni Based Superalloys, Stainless Steels, Titaniums, Technical Writing
Specialization
Candidates should have a B.S. with 5+ years, M.S. with 3+ years, or PhD with 1+ year of experience in relevant fields. Experience with additively manufactured metals, NDE principles, and a manufacturing environment is essential.
Experience Required
Minimum 5 year(s)
Construction Lead (High-tech Manufacturing) at Turner Townsend
Kuala Lumpur, Kuala Lumpur, Malaysia - Full Time
Skills Needed
Site Construction Management, Safety Leadership, Contractor Supervision, Logistical Coordination, Quality Management, Ncr Management, Technical Issue Resolution, Schedule Adherence
Specialization
Candidates must have 8 years of site construction management experience, with at least 5 years managing complex industrial or manufacturing sites. A strong safety leadership record and experience in coordinating trades and managing schedules are also required.
Experience Required
Minimum 5 year(s)
Manufacturing Systems Engineer PLC and IoT at North Point Technology
Novi, Michigan, United States - Full Time
Skills Needed
Manufacturing Systems, Plcs, Robotics, Iot Devices, Industrial Automation, Data Platforms, Operational Analytics, Troubleshooting, Equipment Integration, Data Flow, System Connectivity, Performance Reliability, Documentation, Plant Operations, Real Time Data Collection, Automation Technologies
Specialization
Candidates must have 5 or more years of experience in manufacturing systems or industrial automation, with hands-on experience in PLCs and robotics. Experience in integrating plant equipment with IoT platforms and a strong understanding of factory operations is also required.
Experience Required
Minimum 5 year(s)
Senior Engineer, Manufacturing Engineering at Western Digital
George Town, Penang, Malaysia - Full Time
Skills Needed
Sputter Systems, Process Improvement, Troubleshooting, Yield Improvement, Material Science, Vacuum Technology, Safety Compliance, Training, Process Documentation, Spc Monitoring, New Product Qualification, Team Collaboration, Coaching, Recipe Tuning, Fmea, Engineering Specialist
Specialization
A Bachelor Degree in Material Science and Engineering is required, along with a minimum of 1-3 years of working experience, although fresh graduates are encouraged to apply. Preferred qualifications include studies or thesis related to Vacuum Technology.
Computer Integrated Manufacturing Engineer at Eaton USA
Tainan, , Taiwan - Full Time
Skills Needed
Digital Electrical Engineering, Automation, Control Systems, Plc Programming, Scada Systems, Industry 4.0, Iot Integration, Cloud Computing, Data Analytics, Problem Solving, Continuous Improvement, Data Pipelines, Process Optimization, Collaboration, Communication, Analytical Skills
Specialization
Candidates must have a bachelor's degree in Electrical Engineering, Computer Science, or a related field, along with a minimum of 3 years of experience in DCS/PLC/SCADA system design. Strong understanding of Industry 4.0 technologies and proficiency in control system design software are essential.
Experience Required
Minimum 2 year(s)
Senior Engineer, Manufacturing Engineering at Western Digital
Biñan, Laguna, Philippines - Full Time
Skills Needed
Production Planning, Labor Allocation, Shop Floor Control, Operator Management, Performance Management, Training, Engagement Activities, Attendance Monitoring, 6s, Line Cleanliness, Visual Management, Standard Work Instructions, Continuous Improvement, Communication, Interpersonal Skills, Manufacturing Metrics
Specialization
A Bachelor's Degree in a relevant engineering field and at least 2 years of professional experience in SMT, Test, and Backend operations are required. Experience in production support and operator management is preferred.
Experience Required
Minimum 2 year(s)
Manufacturing Team Lead Trainee (D Shift) at Aumovio
New Braunfels, Texas, United States - Full Time
Skills Needed
Team Leadership, Production Operations, Start Up Meetings, Ergonomics, Job Rotation, Standard Work Instructions, Troubleshooting, First Line Maintenance, 5s+1, Quality Assurance, Delivery Management, Kaizen, Cost Control, Problem Solving, 5 Why Technique, Continuous Improvement
Specialization
Minimum requirements include a High School Diploma or GED, at least 6 months of production employment, the ability to maintain a safe work environment, adherence to quality standards, excellent problem-solving skills, and legal authorization to work in the U.S. Preferred qualifications include over 1 year of manufacturing experience and intermediate computer skills.
Manufacturing Team Lead Trainee (A Shift) at Aumovio
New Braunfels, Texas, United States - Full Time
Skills Needed
Team Leadership, Production Operations, Start Up Meetings, Ergonomics, Job Rotation, Standard Work Instructions, Troubleshooting, First Line Maintenance, 5s+1, Quality Assurance, Delivery Management, Kaizen, Cost Goals, Problem Solving, 5 Why Technique, Preventative Maintenance
Specialization
Minimum requirements include a High School Diploma or GED, at least 6 months of employment in production, the ability to maintain a safe work environment, adherence to quality standards, excellent problem-solving skills, and legal authorization to work in the U.S. Preferred qualifications include over one year of manufacturing experience, continuous improvement experience, intermediate computer skills, and strong mechanical aptitude.
Manufacturing Quality Engineer - Enclosures at Apple
Cupertino, California, United States - Full Time
Skills Needed
Quality Control, Manufacturing Engineering, Process Development, Measurement Technologies, Data Analysis, Supplier Management, Project Management, Root Cause Analysis, Statistical Analysis, Mechanical Enclosures, Injection Molding, Tooling, Dimensional Inspection, Corrective Actions, Failure Analysis, Audit Procedures
Specialization
A minimum of 5 years of experience in manufacturing and quality control is required, along with a BS in Engineering. Preferred qualifications include experience with process quality plans and mechanical quality concepts.
Experience Required
Minimum 5 year(s)
Manufacturing Quality Engineer - Brittles at Apple
Cupertino, California, United States - Full Time
Skills Needed
Manufacturing, Quality Control, Measurement Technologies, Control Strategies, Data Evaluation, Quality Inspection Tools, Supplier Management, Problem Solving, Root Cause Analysis, Statistical Analysis, Mechanical Quality, Reliability Concepts, Project Management, Injection Molding, Automotive Manufacturing, Failure Analysis
Specialization
Candidates should have over 5 years of experience in manufacturing and quality control, along with a BS in Engineering. Preferred qualifications include experience with process quality plans and supplier quality audits.
Experience Required
Minimum 5 year(s)
Aerospace Manufacturing Engineer / Planner at Pressco Products
Sumner, Washington, United States - Full Time
Skills Needed
Manufacturing Engineering, Planning, Estimating, Blueprint Reading, Gd&T, Aerospace Materials, Cost Estimation, Continuous Improvement, Communication, Cad/Cam Software, Quality Standards, Attention To Detail, Problem Solving, Customer Service, Time Management
Specialization
Candidates must have 5+ years of experience in manufacturing engineering, planning, or estimating, preferably in the aerospace industry. A bachelor's or associate's degree in Mechanical or Manufacturing Engineering is required, or equivalent work experience may be considered.
Experience Required
Minimum 5 year(s)
Senior Client Executive-Manufacturing/CPG at NTT DATA
Atlanta, Georgia, United States - Full Time
Skills Needed
Client Management, Sales Organization, P&L Management, Revenue Growth, Financial Management, Manufacturing Industry Knowledge, Utilities Industry Knowledge, Change Implementation, Technology Leverage, Market Share Growth, Strategic Account Planning, Collaborative Relationships, Forecasting Ability, Deal Structuring, Competitive Analysis, C Level Navigation
Specialization
Candidates must have a minimum of 8 years of experience in managing a sales organization with revenues over $20M and in the Manufacturing or Utilities industry. Strong client management skills and the ability to leverage technology for competitive advantage are also required.
Experience Required
Minimum 10 year(s)
Technician- Manufacturing Engineer II USA at LED FastStart
New Iberia, Louisiana, United States - Full Time
Skills Needed
Safety First Mindset, Troubleshooting, Problem Solving, Electrical Systems, Mechanical Systems, Spc Alarms, Statistical Tools, Communication Skills, Technical Tasks, Data Analysis, Training, Documentation, Process Control, Equipment Maintenance, Yield Improvement, Non Conforming Product Disposition
Specialization
Candidates must have a high school diploma or equivalent with relevant experience in manufacturing or a technical discipline. Proficiency in troubleshooting, problem-solving, and understanding of electrical and mechanical systems is required.
Manufacturing Engineering Intern (P-4927) at 10x Genomics
Pleasanton, California, United States -
Full Time

Start Date

Immediate

Expiry Date

06 Apr, 26

Salary

35.0

Posted On

06 Jan, 26

Experience

0 year(s) or above

Remote Job

Yes

Telecommute

Yes

Sponsor Visa

No

Skills

Manufacturing Engineering, Mechanical Engineering, Process Automation, Data Analysis, Technical Documentation, Project Management, Collaboration, CAD Software, Lean Manufacturing, Visual Inspection Systems, Liquid Handling Robotics

Industry

Biotechnology Research

Description
As a Manufacturing Engineer Intern at 10x Genomics, you will play a direct role in scaling our production capabilities. This internship would be part of the Reagent & Consumable Manufacturing team. This 10-12 week program is designed for a technical "doer" who is eager to apply engineering principles to real-world manufacturing challenges. You will focus on identifying, justifying, and implementing automation solutions that enhance process efficiency, ensuring our transformative products reach researchers with speed and precision. What You Will Be Doing: Identify Automation Opportunities: Audit existing manual manufacturing workflows - such as labeling, dispensing, and visual inspections - to pinpoint bottlenecks. Build Business Cases: Quantify the potential ROI, time savings, and quality improvements for proposed automation projects to gain stakeholder buy-in. Execute Technical Projects: Lead the end-to-end implementation of 1-2 small-scale automation tools or systems (e.g., automating tube dispenses or label application). Validate Solutions: Perform testing and verification of new tools to ensure they meet manufacturing specifications and quality standards. Collaborate Cross-Functionally: Work alongside the manufacturing and quality teams to ensure seamless integration of new hardware or software tools into the production line. Minimum Requirements: Able to commit to a full-time internship program for 10-12 weeks during summer of 2026 Currently enrolled as a Junior or Senior in an undergraduate program, or a recent graduate with a Bachelor’s degree in Manufacturing Engineering, Mechanical Engineering, or a related technical field. Demonstrated experience designing or implementing process automation through previous internships, academic projects, or lab work. Experience using data to identify process inefficiencies and proposing hardware or software-based solutions. Ability to document technical workflows and present project proposals to engineering leadership. Preferred Qualifications: Experience with CAD software (e.g., SolidWorks) for designing custom fixtures or tooling. Familiarity with automated visual inspection systems or liquid handling robotics. Basic understanding of Lean Manufacturing principles. #LI-ES1 #10xgenomicsinternships #LI-onsite Below is the base pay range for this position. The actual base pay will depend on several factors unique to each candidate, including one’s skills, qualifications, and experience. Unless otherwise required by law, this role is not eligible for 10x’s health benefit program. During the hiring process, your 10x recruiter can share more information about the Company’s compensation and benefits. Pay Range $30—$35 USD About 10x Genomics At 10x Genomics, accelerating our understanding of biology is more than a mission for us. It is a commitment. This is the century of biology, and the breakthroughs we make now have the potential to change the world. We enable scientists to advance their research, allowing them to address scientific questions they did not even know they could ask. Our tools have enabled fundamental discoveries across biology including cancer, immunology, and neuroscience. Our teams are empowered and encouraged to follow their passions, pursue new ideas, and perform at their best in an inclusive and dynamic environment. We know that behind every scientific breakthrough, there is a deep infrastructure of talented people driving the life sciences industry and making it possible for scientists and clinicians to make new strides. We are dedicated to finding the very best person for every aspect of our work because the innovations and discoveries that we enable together will lead to better technologies, better treatments, and a better future. Find out how you can make a 10x difference. Individuals seeking employment at 10x Genomics are considered without regards to race, color, religion, national origin, age, sex, marital status, ancestry, physical or mental disability, veteran status, gender identity, or sexual orientation, or any other characteristic protected by applicable law. 10x does not accept unsolicited applicants submitted by third-party recruiters or agencies. Any resume or application submitted to 10x without a vendor agreement in place will be considered unsolicited and property of 10x, and 10x will not pay a placement fee.
Responsibilities
The intern will identify automation opportunities in manual manufacturing workflows and execute technical projects to implement automation solutions. They will also validate these solutions and collaborate with cross-functional teams to ensure integration into production.
Manufacturing Engineering Intern (P-4927) at 10x Genomics
Pleasanton, California, United States - Full Time
Skills Needed
Manufacturing Engineering, Mechanical Engineering, Process Automation, Data Analysis, Technical Documentation, Project Management, Collaboration, Cad Software, Lean Manufacturing, Visual Inspection Systems, Liquid Handling Robotics
Specialization
Candidates must be currently enrolled as a Junior or Senior in an undergraduate program or be recent graduates in relevant engineering fields. Experience in process automation and the ability to document workflows and present proposals are also required.
Manufacturing Assembler - Inventory Control at HEICO Corporation
Tulsa, Oklahoma, United States - Full Time
Skills Needed
Assembly, Inventory Control, Documentation, Shop Tools, Traceability, Cycle Counts, Quality Adherence, Mechanical Skills, Blueprint Interpretation, Computer Skills, Mathematics, Organizational Skills, Communication, Detail Orientation, Problem Solving, Multi Tasking
Specialization
Candidates should have a high school diploma or equivalent and hands-on manufacturing experience, preferably in an inventory environment. They must be mechanically inclined, detail-oriented, and able to interpret specifications and blueprints.
MATERIAL HANDLER-MANUFACTURING (PTAC UNITS) at ICE AIR LLC
Duncan, South Carolina, United States - Full Time
Skills Needed
Material Handling, Inventory Management, Forklift Operation, Safety Compliance, Attention To Detail, Organizational Skills, Physical Stamina, Communication Skills, Quality Control, Continuous Improvement, Hvac Knowledge, Teamwork, Problem Solving, Time Management, Packaging, Labeling
Specialization
A high school diploma or GED is required, along with previous experience in a similar role preferred. Candidates must be able to lift up to 100 lbs and demonstrate strong attention to detail and organizational skills.
Staff Engineer, Manufacturing Engineering at Western Digital
Phra Nakhon Si Ayutthaya City Municipality, , Thailand - Full Time
Skills Needed
Process Engineering, Hga Manufacturing, Yield Management, Quality Control, Statistical Analysis, Data Interpretation, Mechanical Principles, Manufacturing Processes, Project Management, Technical Guidance, Collaboration, Process Improvement, Documentation, Communication, Mentorship, Self Development
Specialization
Candidates must have a Bachelor's degree in Mechanical Engineering or a related field and a minimum of 3 years of experience in process engineering, preferably in HGA manufacturing. A good understanding of statistical analysis and mechanical principles is preferred.
Experience Required
Minimum 2 year(s)
Punch Press Manufacturing Machine Operator at MORGAN ADVANCED MATERIALS & TECH I
Hayward, California, United States - Full Time
Skills Needed
Punch Press Operation, Machine Maintenance, Quality Inspection, Technical Drawings, Basic Computer Skills, Team Collaboration, Troubleshooting, Mechanical Aptitude, Production Data Recording, Safety Compliance, Attention To Detail, Fast Paced Environment, Communication Skills, Housekeeping, Continuous Improvement, Visual Inspection
Specialization
A high school diploma or equivalent is preferred, along with 1-3 years of experience operating punch press or similar machinery. Basic computer skills, good communication skills, and the ability to read drawings and use precision measuring instruments are also required.
Senior Machine Shop Manufacturing Engineer at JOBY AERO INC
Santa Cruz, California, United States - Full Time
Skills Needed
Mechanical Design Fundamentals, Machining Processes, Design For Manufacturability, Drawing Standards, Cad Systems, Cam Programming, Welding Processes, Waterjet Manufacturing, Metallic Materials, Engineering Decisions, Prototype Manufacturing, Custom Fixtures, Aerospace Hardware, Test Hardware Development
Specialization
Candidates must have a Bachelor's degree in Mechanical or Manufacturing Engineering and at least 5 years of experience in machining operations. A strong understanding of mechanical design fundamentals, machining processes, and design for manufacturability is required.
Experience Required
Minimum 5 year(s)
Food Manufacturing Machine Operator - Days at Lactalis US Yogurt, Inc.
Londonderry, New Hampshire, United States - Full Time
Skills Needed
Manufacturing Experience, Safety Compliance, Product Quality, Line Efficiency, Communication Skills, Teamwork, Adaptability, Computer Literacy
Specialization
Qualified applicants should have 1-2 years of experience in a manufacturing environment and the ability to work a 12-hour schedule. They must also be able to lift 50 lbs, possess solid communication skills, and be computer literate.
Senior NDE Engineer, Additive Manufacturing at Relativity Space
Long Beach, California, United States - Full Time
Skills Needed
Nde Methods, Additive Manufacturing, Materials Characterization, Non Destructive Evaluation, Manufacturing Environment, Design Of Experiments, Data Analysis, Technical Presentations, Statistical Pipelines, Fatigue Properties, Welding Processes, Aluminums, Ni Based Superalloys, Stainless Steels, Titaniums, Technical Writing
Specialization
Candidates should have a B.S. with 5+ years, M.S. with 3+ years, or PhD with 1+ year of experience in relevant fields. Experience with additively manufactured metals, NDE principles, and a manufacturing environment is essential.
Experience Required
Minimum 5 year(s)
Construction Lead (High-tech Manufacturing) at Turner Townsend
Kuala Lumpur, Kuala Lumpur, Malaysia - Full Time
Skills Needed
Site Construction Management, Safety Leadership, Contractor Supervision, Logistical Coordination, Quality Management, Ncr Management, Technical Issue Resolution, Schedule Adherence
Specialization
Candidates must have 8 years of site construction management experience, with at least 5 years managing complex industrial or manufacturing sites. A strong safety leadership record and experience in coordinating trades and managing schedules are also required.
Experience Required
Minimum 5 year(s)
Manufacturing Systems Engineer PLC and IoT at North Point Technology
Novi, Michigan, United States - Full Time
Skills Needed
Manufacturing Systems, Plcs, Robotics, Iot Devices, Industrial Automation, Data Platforms, Operational Analytics, Troubleshooting, Equipment Integration, Data Flow, System Connectivity, Performance Reliability, Documentation, Plant Operations, Real Time Data Collection, Automation Technologies
Specialization
Candidates must have 5 or more years of experience in manufacturing systems or industrial automation, with hands-on experience in PLCs and robotics. Experience in integrating plant equipment with IoT platforms and a strong understanding of factory operations is also required.
Experience Required
Minimum 5 year(s)
Senior Engineer, Manufacturing Engineering at Western Digital
George Town, Penang, Malaysia - Full Time
Skills Needed
Sputter Systems, Process Improvement, Troubleshooting, Yield Improvement, Material Science, Vacuum Technology, Safety Compliance, Training, Process Documentation, Spc Monitoring, New Product Qualification, Team Collaboration, Coaching, Recipe Tuning, Fmea, Engineering Specialist
Specialization
A Bachelor Degree in Material Science and Engineering is required, along with a minimum of 1-3 years of working experience, although fresh graduates are encouraged to apply. Preferred qualifications include studies or thesis related to Vacuum Technology.
Computer Integrated Manufacturing Engineer at Eaton USA
Tainan, , Taiwan - Full Time
Skills Needed
Digital Electrical Engineering, Automation, Control Systems, Plc Programming, Scada Systems, Industry 4.0, Iot Integration, Cloud Computing, Data Analytics, Problem Solving, Continuous Improvement, Data Pipelines, Process Optimization, Collaboration, Communication, Analytical Skills
Specialization
Candidates must have a bachelor's degree in Electrical Engineering, Computer Science, or a related field, along with a minimum of 3 years of experience in DCS/PLC/SCADA system design. Strong understanding of Industry 4.0 technologies and proficiency in control system design software are essential.
Experience Required
Minimum 2 year(s)
Senior Engineer, Manufacturing Engineering at Western Digital
Biñan, Laguna, Philippines - Full Time
Skills Needed
Production Planning, Labor Allocation, Shop Floor Control, Operator Management, Performance Management, Training, Engagement Activities, Attendance Monitoring, 6s, Line Cleanliness, Visual Management, Standard Work Instructions, Continuous Improvement, Communication, Interpersonal Skills, Manufacturing Metrics
Specialization
A Bachelor's Degree in a relevant engineering field and at least 2 years of professional experience in SMT, Test, and Backend operations are required. Experience in production support and operator management is preferred.
Experience Required
Minimum 2 year(s)
Manufacturing Team Lead Trainee (D Shift) at Aumovio
New Braunfels, Texas, United States - Full Time
Skills Needed
Team Leadership, Production Operations, Start Up Meetings, Ergonomics, Job Rotation, Standard Work Instructions, Troubleshooting, First Line Maintenance, 5s+1, Quality Assurance, Delivery Management, Kaizen, Cost Control, Problem Solving, 5 Why Technique, Continuous Improvement
Specialization
Minimum requirements include a High School Diploma or GED, at least 6 months of production employment, the ability to maintain a safe work environment, adherence to quality standards, excellent problem-solving skills, and legal authorization to work in the U.S. Preferred qualifications include over 1 year of manufacturing experience and intermediate computer skills.
Manufacturing Team Lead Trainee (A Shift) at Aumovio
New Braunfels, Texas, United States - Full Time
Skills Needed
Team Leadership, Production Operations, Start Up Meetings, Ergonomics, Job Rotation, Standard Work Instructions, Troubleshooting, First Line Maintenance, 5s+1, Quality Assurance, Delivery Management, Kaizen, Cost Goals, Problem Solving, 5 Why Technique, Preventative Maintenance
Specialization
Minimum requirements include a High School Diploma or GED, at least 6 months of employment in production, the ability to maintain a safe work environment, adherence to quality standards, excellent problem-solving skills, and legal authorization to work in the U.S. Preferred qualifications include over one year of manufacturing experience, continuous improvement experience, intermediate computer skills, and strong mechanical aptitude.
Manufacturing Quality Engineer - Enclosures at Apple
Cupertino, California, United States - Full Time
Skills Needed
Quality Control, Manufacturing Engineering, Process Development, Measurement Technologies, Data Analysis, Supplier Management, Project Management, Root Cause Analysis, Statistical Analysis, Mechanical Enclosures, Injection Molding, Tooling, Dimensional Inspection, Corrective Actions, Failure Analysis, Audit Procedures
Specialization
A minimum of 5 years of experience in manufacturing and quality control is required, along with a BS in Engineering. Preferred qualifications include experience with process quality plans and mechanical quality concepts.
Experience Required
Minimum 5 year(s)
Manufacturing Quality Engineer - Brittles at Apple
Cupertino, California, United States - Full Time
Skills Needed
Manufacturing, Quality Control, Measurement Technologies, Control Strategies, Data Evaluation, Quality Inspection Tools, Supplier Management, Problem Solving, Root Cause Analysis, Statistical Analysis, Mechanical Quality, Reliability Concepts, Project Management, Injection Molding, Automotive Manufacturing, Failure Analysis
Specialization
Candidates should have over 5 years of experience in manufacturing and quality control, along with a BS in Engineering. Preferred qualifications include experience with process quality plans and supplier quality audits.
Experience Required
Minimum 5 year(s)
Aerospace Manufacturing Engineer / Planner at Pressco Products
Sumner, Washington, United States - Full Time
Skills Needed
Manufacturing Engineering, Planning, Estimating, Blueprint Reading, Gd&T, Aerospace Materials, Cost Estimation, Continuous Improvement, Communication, Cad/Cam Software, Quality Standards, Attention To Detail, Problem Solving, Customer Service, Time Management
Specialization
Candidates must have 5+ years of experience in manufacturing engineering, planning, or estimating, preferably in the aerospace industry. A bachelor's or associate's degree in Mechanical or Manufacturing Engineering is required, or equivalent work experience may be considered.
Experience Required
Minimum 5 year(s)
Senior Client Executive-Manufacturing/CPG at NTT DATA
Atlanta, Georgia, United States - Full Time
Skills Needed
Client Management, Sales Organization, P&L Management, Revenue Growth, Financial Management, Manufacturing Industry Knowledge, Utilities Industry Knowledge, Change Implementation, Technology Leverage, Market Share Growth, Strategic Account Planning, Collaborative Relationships, Forecasting Ability, Deal Structuring, Competitive Analysis, C Level Navigation
Specialization
Candidates must have a minimum of 8 years of experience in managing a sales organization with revenues over $20M and in the Manufacturing or Utilities industry. Strong client management skills and the ability to leverage technology for competitive advantage are also required.
Experience Required
Minimum 10 year(s)
Technician- Manufacturing Engineer II USA at LED FastStart
New Iberia, Louisiana, United States - Full Time
Skills Needed
Safety First Mindset, Troubleshooting, Problem Solving, Electrical Systems, Mechanical Systems, Spc Alarms, Statistical Tools, Communication Skills, Technical Tasks, Data Analysis, Training, Documentation, Process Control, Equipment Maintenance, Yield Improvement, Non Conforming Product Disposition
Specialization
Candidates must have a high school diploma or equivalent with relevant experience in manufacturing or a technical discipline. Proficiency in troubleshooting, problem-solving, and understanding of electrical and mechanical systems is required.