Loblaw Companies Limited Jobs overseas

About 20263 results in (3) seconds Clear Filters

Jobs Search

About 20263 results in (3) seconds
Principal Primary Design Engineer at UGL Limited
Sydney, New South Wales, Australia - Full Time
Skills Needed
Hv Substation Design, Transmission Line Design, Earthing Design, Insulation Coordination, Cymcap, Cdegs, Emtp, Pvsyst, Primary Design, Hv Cable Design, Lightning Protection, Emf And Corona Study, Technical Leadership, Project Budgeting, Resource Management, Electrical Engineering
Specialization
Requires a Bachelor's degree in Electrical Engineering, CPeng status, and at least 15 years of experience, including 8 years specifically in primary design of HV plants. Proficiency in design software such as Cymcap and CDEGS is essential.
Experience Required
Minimum 10 year(s)
Supervisor - Assembly & Erection at UGL Limited
Wagga Wagga, New South Wales, Australia - Full Time
Skills Needed
Assembly And Erection Supervision, Stringing, Ohs Legislative Compliance, Subcontractor Management, Hse Culture Development, Verbal Communication, Construction Management
Specialization
Requires a minimum of 3 years of experience as an Assembly and Erection Supervisor with extensive knowledge of stringing. Must possess a valid Driver's Licence, White Card, and relevant tertiary or industry qualifications.
Experience Required
Minimum 2 year(s)
Senior Primary Design Engineer at UGL Limited
Sydney, New South Wales, Australia - Full Time
Skills Needed
Hv Substation Design, Transmission Line Design, Earthing Design, Insulation Coordination, Cymcap, Cdegs, Emtp, Pvsyst, Hv Cable Design, Lightning Protection, Bess, Solar Farm Design, Wind Farm Design, Electrical Engineering, Technical Specifications, Primary Design
Specialization
Requires a Bachelor's degree in Electrical Engineering, CPeng status, and at least 6 years of primary design experience. Proficiency in design software such as Cymcap and CDEGS is essential.
Experience Required
Minimum 5 year(s)
E&I Technician at UGL Limited
Pilbara, Western Australia, Australia - Full Time
Skills Needed
Instrumentation, Electrical Maintenance, Eeha, Lvr, Cpr, Safety Management, Gas Project Maintenance
Specialization
Requires a Certificate III or IV in Engineering - Instrumentation and a WA Electrical Licence. Must possess current EEHA, Construction White Card, and LVR/CPR certifications.
Experience Required
Minimum 2 year(s)
Manager – Bank Advisory, Financial Crime Risk at AMP Limited
Sydney, New South Wales, Australia - Full Time
Skills Needed
Financial Crime Advisory, Aml/Ctf Compliance, Risk Management, Regulatory Interpretation, Stakeholder Management, Governance, Line 2 Oversight, Fraud And Scams Strategy, Risk Assessment, Committee Reporting, Banking Operations, Wealth Management
Specialization
Requires over 5 years of experience in financial crime advisory or compliance within financial services, consulting, or law. A degree in Business, Commerce, Finance, or Law is required, with a strong understanding of AML/CTF frameworks.
Experience Required
Minimum 5 year(s)
Painter Blaster at UGL Limited
Kwinana, Western Australia, Australia - Full Time
Skills Needed
Abrasive Blasting, Industrial Painting, Surface Preparation, Airless Spray Equipment, Conventional Spray Equipment, Quality Assurance, Safety Standards, Reading Job Specifications, Coating Application, Inspection, Equipment Maintenance, Working At Heights, Confined Space Entry, Gas Test Atmosphere
Specialization
Requires a minimum of 4 years of industrial experience and relevant trade certifications. Must hold a White Card, current driver's license, and valid certifications for working at heights, confined space, and gas testing.
Experience Required
Minimum 2 year(s)
Mobile Technician Level 7 at UGL Limited
Sutherland, New South Wales, Australia - Full Time
Skills Needed
Fault Finding, Diagnostics, Mechanical Systems, Electrical Systems, Preventative Maintenance, Rolling Stock Maintenance, Communication Skills, Safe Work Practices, Quality Workmanship, Forklift Operation, Overhead Crane Operation
Specialization
Requires an Australian recognized trade qualification with a Certificate of Proficiency and full Australian work rights. Candidates should possess strong diagnostic skills and a commitment to safety, with rolling stock experience preferred but not mandatory.
Experience Required
Minimum 2 year(s)
Event Lead at UGL Limited
Adelaide, South Australia, Australia - Full Time
Skills Needed
Shutdown Delivery, Project Planning, Resource Alignment, Budget Management, Hse Compliance, Contractor Management, Sap Cmms, Stakeholder Engagement, Risk Management, Critical Path Analysis, Brownfield Lng Experience, Work Management
Specialization
Requires a trade or engineering background in Electrical, Instrumentation, Mechanical, or SMP with a strong track record in LNG or oil and gas turnarounds. Must be proficient in SAP CMMS and experienced in managing contractors and on-site risks under pressure.
Experience Required
Minimum 10 year(s)
Project Lead - Distribution (Glove & Barrier) at UGL Limited
Melbourne, Victoria, Australia - Full Time
Skills Needed
Field Leadership, Overhead Distribution Works, Glove & Barrier Work Practices, Switching, Access Permits, Safety Leadership, Swms Review, Network Documentation, Stakeholder Management, Crew Coordination
Specialization
Requires a Certificate III in ESI Power Systems Distribution Overhead and a current Victorian Electrical Licence. Must have demonstrated experience leading crews on distribution networks with strong knowledge of Glove & Barrier practices.
Experience Required
Minimum 5 year(s)
Undergraduate Engineer - Electrical at UGL Limited
Brisbane, Queensland, Australia - Full Time
Skills Needed
Electrical Engineering, Lv And Mv Infrastructure, Technical Documentation, Site Inspections, Procurement, Cad, Microsoft Office, Project Delivery, Condition Assessments, Stakeholder Management
Specialization
Must be a 3rd or 4th year Bachelor of Electrical Engineering student at the University of Queensland. Requires strong organizational skills, a commitment to safety, and a proactive approach to learning in a hands-on environment.
Senior Project Engineer Track and Civil at UGL Limited
, New South Wales, Australia - Full Time
Skills Needed
Project Management, Civil Engineering, Track Construction, Bridge Construction, Construction Management, Quality Assurance, Budget Management, Contract Management, Hse Management, Technical Reporting, Stakeholder Liaison, Time Management, Design Review, Financial Control, People Management
Specialization
Candidates must hold a Bachelor's degree in Civil Engineering and possess 6-10 years of post-graduate experience. Mandatory requirements include obtaining a Rail Infrastructure Workers Card and a NSW Construction Industry Safety Induction card.
Experience Required
Minimum 5 year(s)
Camp Manager at UGL Limited
Perth, Western Australia, Australia - Full Time
Skills Needed
Camp Management, Village Operations, Contractor Management, Budget Management, Stakeholder Management, Safety Compliance, Food Safety, Facilities Management, Operational Performance, Leadership
Specialization
Proven experience in camp or remote site management with a strong background in contractor and budget management. A relevant qualification in hospitality or facilities management is desired.
Experience Required
Minimum 5 year(s)
Boilermaker OR Special Class Welder at UGL Limited
Pilbara, Western Australia, Australia - Full Time
Skills Needed
Boilermaking, Welding, Hazardous Area Work, Confined Space Entry, Technical Integrity Maintenance, Refurbishment
Specialization
Candidates must hold a Boilermaker Welder qualification and a Construction Induction White Card. Required certifications include Confined Space Entry and Working in Hazardous Areas, along with unrestricted Australian work rights.
Experience Required
Minimum 2 year(s)
Mechanical Package Engineer / Lead – Data Centre Construction at UGL Limited
Melbourne, Victoria, Australia - Full Time
Skills Needed
Mechanical Engineering, Hvac, Chilled Water Plants, Crah/Crac Units, Cooling Towers, Design Coordination, Procurement, Subcontractor Management, Commissioning, Factory Acceptance Testing (Fat), Integrated Systems Testing (Ist), Technical Risk Management, Value Engineering, Stakeholder Engagement, Thermal Management, Project Management
Specialization
Requires a tertiary qualification in Mechanical Engineering and over 8 years of experience in building services, specifically within data centres or mission-critical environments. Must have proven expertise in HVAC systems, redundancy strategies, and subcontractor management.
Experience Required
Minimum 10 year(s)
Rope Access Mechanical Fitter at UGL Limited
Pilbara, Western Australia, Australia - Full Time
Skills Needed
Loading Arm Maintenance, Mechanical Fitting, Rope Access, Gas Testing, Confined Space Entry, Confined Space Rescue, Maritime Security
Specialization
Must be a qualified Mechanical Fitter and IRATA Rope Access Technician (L1 or L2) with specific experience in loading arms. Required certifications include Gas Test Atmosphere, Confined Space, Confined Space Rescue, and MSIC.
Experience Required
Minimum 2 year(s)
Production Coordinator at UGL Limited
Mackay, Queensland, Australia - Full Time
Skills Needed
Production Scheduling, Wip Management, Stakeholder Management, Sap, Erp, Resource Planning, Operational Reporting, Procurement Coordination, Warehouse Coordination, Bottleneck Reduction
Specialization
Candidates need at least 5 years of planning experience in a workshop or heavy industry environment. Engineering or Trade qualifications and experience with SAP or ERP systems are highly regarded.
Experience Required
Minimum 5 year(s)
Signal Electrician - Rail at UGL Limited
, New South Wales, Australia - Full Time
Skills Needed
Rail Signalling, Fault Rectification, Testing, Commissioning, Decommissioning, Technical Drawing Interpretation, Communication, Time Management, Computer Literacy, Maintenance Inspections
Specialization
Requires a Cert IV in Electrical (Rail Signalling) and previous experience in signalling systems. Must possess a White Card, Class C Driver's licence, and preferably a current RIW card.
Experience Required
Minimum 2 year(s)
E&I Supervisor at UGL Limited
, Western Australia, Australia - Full Time
Skills Needed
E&I Supervision, Electrical Planning, Instrumentation Execution, Safety Compliance, Quality Assurance, Schedule Management, Resource Allocation, Jde, Cmms, Microsoft Excel, Power Bi, Hv Documentation, Team Leadership, Problem Solving, Project Coordination
Specialization
Proven experience as an E&I Supervisor within LNG or Oil & Gas environments is mandatory. Candidates should possess strong computer literacy, including Excel and CMMS-based planning systems.
Experience Required
Minimum 5 year(s)
Rigger Level 4 at UGL Limited
, New South Wales, Australia - Full Time
Skills Needed
Rigging, High Risk Work License, Working At Heights, Confined Space Entry, Heavy Industry Experience, Power Station Maintenance
Specialization
Requires a High Risk Work License (Advanced or Intermediate), White Card, and certifications in Working at Heights and Confined Space. Candidates must have 2-3 years of rigging experience, preferably in power stations or heavy industry.
Experience Required
Minimum 2 year(s)
Crane Operator at UGL Limited
Perth, Western Australia, Australia - Full Time
Skills Needed
Crane Operation, Brownfield Shutdown Execution, Oil & Gas Turnaround, Safety Management, Heavy Vehicle Operation, High Intensity Environment Execution
Specialization
Candidates must possess HRWL (C1, CN, or CO classes) with VOC, a heavy vehicle driver's license (HR, MC, or HC), and a Construction White Card. Proven experience in Oil & Gas turnarounds and brownfield operating environments is required.
Experience Required
Minimum 2 year(s)
Principal Primary Design Engineer at UGL Limited
Sydney, New South Wales, Australia -
Full Time


Start Date

Immediate

Expiry Date

06 Aug, 26

Salary

0.0

Posted On

08 May, 26

Experience

10 year(s) or above

Remote Job

Yes

Telecommute

Yes

Sponsor Visa

No

Skills

HV Substation Design, Transmission Line Design, Earthing Design, Insulation Coordination, Cymcap, CDEGS, EMTP, PVsyst, Primary Design, HV Cable Design, Lightning Protection, EMF and Corona Study, Technical Leadership, Project Budgeting, Resource Management, Electrical Engineering

Industry

Rail Transportation

Description
Help us shape the nation. UGL Utilities team designs, constructs and maintains critical infrastructure across the power, water and renewable sectors. Ranging from HV Substations and Transmission Lines up to 500kV to power stations and wastewater treatment plants. We design and construct the following assets; substations, transmission lines, power generation, electrical distribution networks, water and waste water treatment plants and water pipelines. About the role Flexibility for this role to be based in Sydney, Brisbane or Perth. With major projects in tender, UGL is set to expand our team. There is an opportunity for you to focus on the technical or move into people management if that’s where you passion lies. Career enhancing opportunity for you to be at the forefront of major projects in 500 KV substation and transmission lines. Supervise and take technical control of and responsibility for groups of professional engineers engaged in complex engineering applications. Plan, direct, co-ordinate other professional and technical staff. Act as the principal technical reference authority and provide technical leadership for all engineering act. Develop a true understanding of the commercial elements of the project and maintain cost efficiency through the entire cost of the design (eg. design, procurement, installation, operation and maintenance) Provide conceptual and detailed design of HV Substations, Transmission Line, BESS, solar and wind farms. Develop specifications and interface with management on design issues. Key responsibilities Providing feedback / input to Head of Engineering with regards resource levels and performance etc. Lead a team of engineers that deliver the works under their area of expertise. Assists Head of Engineering in determining budgets and schedule. Monitors budgets and schedule for the areas under their control. Key areas of substation design: Substation Configuration and Busbar Config (Single, double, 1.5CB scheme, etc Plant layouts, sections, and details Busbars and Connections (Fittings, Busbar Selection (Rigid, Strung), S/C Forces, Gantry forces, Sags/ Tension/ Deflection, Arrangement) Clearances and Layouts (Safety, Fire, Transportation and Maintenance) Underground Services (Trenches/ Conduits/Cable routes capacity) Earthing design (Fundamentals, Soil/ Grid Testing, Current Splits) Solid understanding of HV equipment/Buildings specification and technical particulars. BESS, Solar and Wind farms and their requirements HV cable design Lightning protection EMF and Corona study Insulation Coordination (SA Selection / Insulation Selection) Lighting design Fair Knowledge on system planning, fault calculation, Power quality and Harmonics Key areas of Electrical design of Transmission Lines: Transposition / Impedance calculation Insulators, Conductors and Fittings Electrical Clearances Earthing design Lightning and Switching Performance / SA Selection / Insulator Selection Noise Study EMF and Corona Study Low frequency Induction (LFI) Study About You Minimum experience: 15 years 4 year degree qualification to Bachelor status in electrical engineering. CPeng Status Fundamental understanding of primary design. At least 8 year’s design experience in primary design of HV plants. Details understanding of HV cable design, Earthing design and lightning protection. Solid knowledge on insulation coordination, EMF and lighting design Professional level knowledge of Cymcap and CDEGS (MALZ/MALT/SESshield) design software Fair knowledge of EMTP, CDEGS (FCDIST, RESAP, HIFREQ, SPLITS), PVsyst. Sound knowledge of HV and Solar farm equipment specification and ability to investigate the requirements and develop specification from basic information. Basic understanding of secondary design aspects of HV plants, solar and wind farms. Solid understanding of the interface requirements of the civil/structural aspects of HV substations. Site experience during construction/commissioning of HV substations is an advantage Effectively communicate with CAD draughtspersons to optimise drawing output. About UGL As a member of the CIMIC Group of companies, we value diversity in our team’s backgrounds, ideas, work styles. We are an Equal Opportunity Employer and strongly encourage applications from women, people with disabilities, Aboriginal & Torres Strait Islander people, mature aged workers and individuals from culturally diverse backgrounds. What we offer · Enjoy access to flexible working arrangements · Benefit from 16 weeks of paid primary parental leave. · Complimentary salary continuance insurance. · Discounted Medibank health insurance. · Shape your career with an Individual Development Plan. · Participate in our Wellness Program with AIA Vitality. · Access our OneRewards Discount Program. How to apply If this role sounds like you, please click on the apply button and follow the prompts. We will get in touch if you are shortlisted for this opportunity. Please note: As part of the recruitment process, relevant screening checks will be conducted. These may include reference checks, verification of the right to work in Australia, a national criminal history check, anti-money laundering checks, and a pre-employment medical assessment (including drug and alcohol screening). Job Ref 266280
Responsibilities
Lead and supervise a team of professional engineers in the conceptual and detailed design of HV substations, transmission lines, and renewable energy assets. Act as the principal technical authority while managing project budgets, schedules, and commercial cost efficiency.
Principal Primary Design Engineer at UGL Limited
Sydney, New South Wales, Australia - Full Time
Skills Needed
Hv Substation Design, Transmission Line Design, Earthing Design, Insulation Coordination, Cymcap, Cdegs, Emtp, Pvsyst, Primary Design, Hv Cable Design, Lightning Protection, Emf And Corona Study, Technical Leadership, Project Budgeting, Resource Management, Electrical Engineering
Specialization
Requires a Bachelor's degree in Electrical Engineering, CPeng status, and at least 15 years of experience, including 8 years specifically in primary design of HV plants. Proficiency in design software such as Cymcap and CDEGS is essential.
Experience Required
Minimum 10 year(s)
Supervisor - Assembly & Erection at UGL Limited
Wagga Wagga, New South Wales, Australia - Full Time
Skills Needed
Assembly And Erection Supervision, Stringing, Ohs Legislative Compliance, Subcontractor Management, Hse Culture Development, Verbal Communication, Construction Management
Specialization
Requires a minimum of 3 years of experience as an Assembly and Erection Supervisor with extensive knowledge of stringing. Must possess a valid Driver's Licence, White Card, and relevant tertiary or industry qualifications.
Experience Required
Minimum 2 year(s)
Senior Primary Design Engineer at UGL Limited
Sydney, New South Wales, Australia - Full Time
Skills Needed
Hv Substation Design, Transmission Line Design, Earthing Design, Insulation Coordination, Cymcap, Cdegs, Emtp, Pvsyst, Hv Cable Design, Lightning Protection, Bess, Solar Farm Design, Wind Farm Design, Electrical Engineering, Technical Specifications, Primary Design
Specialization
Requires a Bachelor's degree in Electrical Engineering, CPeng status, and at least 6 years of primary design experience. Proficiency in design software such as Cymcap and CDEGS is essential.
Experience Required
Minimum 5 year(s)
E&I Technician at UGL Limited
Pilbara, Western Australia, Australia - Full Time
Skills Needed
Instrumentation, Electrical Maintenance, Eeha, Lvr, Cpr, Safety Management, Gas Project Maintenance
Specialization
Requires a Certificate III or IV in Engineering - Instrumentation and a WA Electrical Licence. Must possess current EEHA, Construction White Card, and LVR/CPR certifications.
Experience Required
Minimum 2 year(s)
Manager – Bank Advisory, Financial Crime Risk at AMP Limited
Sydney, New South Wales, Australia - Full Time
Skills Needed
Financial Crime Advisory, Aml/Ctf Compliance, Risk Management, Regulatory Interpretation, Stakeholder Management, Governance, Line 2 Oversight, Fraud And Scams Strategy, Risk Assessment, Committee Reporting, Banking Operations, Wealth Management
Specialization
Requires over 5 years of experience in financial crime advisory or compliance within financial services, consulting, or law. A degree in Business, Commerce, Finance, or Law is required, with a strong understanding of AML/CTF frameworks.
Experience Required
Minimum 5 year(s)
Painter Blaster at UGL Limited
Kwinana, Western Australia, Australia - Full Time
Skills Needed
Abrasive Blasting, Industrial Painting, Surface Preparation, Airless Spray Equipment, Conventional Spray Equipment, Quality Assurance, Safety Standards, Reading Job Specifications, Coating Application, Inspection, Equipment Maintenance, Working At Heights, Confined Space Entry, Gas Test Atmosphere
Specialization
Requires a minimum of 4 years of industrial experience and relevant trade certifications. Must hold a White Card, current driver's license, and valid certifications for working at heights, confined space, and gas testing.
Experience Required
Minimum 2 year(s)
Mobile Technician Level 7 at UGL Limited
Sutherland, New South Wales, Australia - Full Time
Skills Needed
Fault Finding, Diagnostics, Mechanical Systems, Electrical Systems, Preventative Maintenance, Rolling Stock Maintenance, Communication Skills, Safe Work Practices, Quality Workmanship, Forklift Operation, Overhead Crane Operation
Specialization
Requires an Australian recognized trade qualification with a Certificate of Proficiency and full Australian work rights. Candidates should possess strong diagnostic skills and a commitment to safety, with rolling stock experience preferred but not mandatory.
Experience Required
Minimum 2 year(s)
Event Lead at UGL Limited
Adelaide, South Australia, Australia - Full Time
Skills Needed
Shutdown Delivery, Project Planning, Resource Alignment, Budget Management, Hse Compliance, Contractor Management, Sap Cmms, Stakeholder Engagement, Risk Management, Critical Path Analysis, Brownfield Lng Experience, Work Management
Specialization
Requires a trade or engineering background in Electrical, Instrumentation, Mechanical, or SMP with a strong track record in LNG or oil and gas turnarounds. Must be proficient in SAP CMMS and experienced in managing contractors and on-site risks under pressure.
Experience Required
Minimum 10 year(s)
Project Lead - Distribution (Glove & Barrier) at UGL Limited
Melbourne, Victoria, Australia - Full Time
Skills Needed
Field Leadership, Overhead Distribution Works, Glove & Barrier Work Practices, Switching, Access Permits, Safety Leadership, Swms Review, Network Documentation, Stakeholder Management, Crew Coordination
Specialization
Requires a Certificate III in ESI Power Systems Distribution Overhead and a current Victorian Electrical Licence. Must have demonstrated experience leading crews on distribution networks with strong knowledge of Glove & Barrier practices.
Experience Required
Minimum 5 year(s)
Undergraduate Engineer - Electrical at UGL Limited
Brisbane, Queensland, Australia - Full Time
Skills Needed
Electrical Engineering, Lv And Mv Infrastructure, Technical Documentation, Site Inspections, Procurement, Cad, Microsoft Office, Project Delivery, Condition Assessments, Stakeholder Management
Specialization
Must be a 3rd or 4th year Bachelor of Electrical Engineering student at the University of Queensland. Requires strong organizational skills, a commitment to safety, and a proactive approach to learning in a hands-on environment.
Senior Project Engineer Track and Civil at UGL Limited
, New South Wales, Australia - Full Time
Skills Needed
Project Management, Civil Engineering, Track Construction, Bridge Construction, Construction Management, Quality Assurance, Budget Management, Contract Management, Hse Management, Technical Reporting, Stakeholder Liaison, Time Management, Design Review, Financial Control, People Management
Specialization
Candidates must hold a Bachelor's degree in Civil Engineering and possess 6-10 years of post-graduate experience. Mandatory requirements include obtaining a Rail Infrastructure Workers Card and a NSW Construction Industry Safety Induction card.
Experience Required
Minimum 5 year(s)
Camp Manager at UGL Limited
Perth, Western Australia, Australia - Full Time
Skills Needed
Camp Management, Village Operations, Contractor Management, Budget Management, Stakeholder Management, Safety Compliance, Food Safety, Facilities Management, Operational Performance, Leadership
Specialization
Proven experience in camp or remote site management with a strong background in contractor and budget management. A relevant qualification in hospitality or facilities management is desired.
Experience Required
Minimum 5 year(s)
Boilermaker OR Special Class Welder at UGL Limited
Pilbara, Western Australia, Australia - Full Time
Skills Needed
Boilermaking, Welding, Hazardous Area Work, Confined Space Entry, Technical Integrity Maintenance, Refurbishment
Specialization
Candidates must hold a Boilermaker Welder qualification and a Construction Induction White Card. Required certifications include Confined Space Entry and Working in Hazardous Areas, along with unrestricted Australian work rights.
Experience Required
Minimum 2 year(s)
Mechanical Package Engineer / Lead – Data Centre Construction at UGL Limited
Melbourne, Victoria, Australia - Full Time
Skills Needed
Mechanical Engineering, Hvac, Chilled Water Plants, Crah/Crac Units, Cooling Towers, Design Coordination, Procurement, Subcontractor Management, Commissioning, Factory Acceptance Testing (Fat), Integrated Systems Testing (Ist), Technical Risk Management, Value Engineering, Stakeholder Engagement, Thermal Management, Project Management
Specialization
Requires a tertiary qualification in Mechanical Engineering and over 8 years of experience in building services, specifically within data centres or mission-critical environments. Must have proven expertise in HVAC systems, redundancy strategies, and subcontractor management.
Experience Required
Minimum 10 year(s)
Rope Access Mechanical Fitter at UGL Limited
Pilbara, Western Australia, Australia - Full Time
Skills Needed
Loading Arm Maintenance, Mechanical Fitting, Rope Access, Gas Testing, Confined Space Entry, Confined Space Rescue, Maritime Security
Specialization
Must be a qualified Mechanical Fitter and IRATA Rope Access Technician (L1 or L2) with specific experience in loading arms. Required certifications include Gas Test Atmosphere, Confined Space, Confined Space Rescue, and MSIC.
Experience Required
Minimum 2 year(s)
Production Coordinator at UGL Limited
Mackay, Queensland, Australia - Full Time
Skills Needed
Production Scheduling, Wip Management, Stakeholder Management, Sap, Erp, Resource Planning, Operational Reporting, Procurement Coordination, Warehouse Coordination, Bottleneck Reduction
Specialization
Candidates need at least 5 years of planning experience in a workshop or heavy industry environment. Engineering or Trade qualifications and experience with SAP or ERP systems are highly regarded.
Experience Required
Minimum 5 year(s)
Signal Electrician - Rail at UGL Limited
, New South Wales, Australia - Full Time
Skills Needed
Rail Signalling, Fault Rectification, Testing, Commissioning, Decommissioning, Technical Drawing Interpretation, Communication, Time Management, Computer Literacy, Maintenance Inspections
Specialization
Requires a Cert IV in Electrical (Rail Signalling) and previous experience in signalling systems. Must possess a White Card, Class C Driver's licence, and preferably a current RIW card.
Experience Required
Minimum 2 year(s)
E&I Supervisor at UGL Limited
, Western Australia, Australia - Full Time
Skills Needed
E&I Supervision, Electrical Planning, Instrumentation Execution, Safety Compliance, Quality Assurance, Schedule Management, Resource Allocation, Jde, Cmms, Microsoft Excel, Power Bi, Hv Documentation, Team Leadership, Problem Solving, Project Coordination
Specialization
Proven experience as an E&I Supervisor within LNG or Oil & Gas environments is mandatory. Candidates should possess strong computer literacy, including Excel and CMMS-based planning systems.
Experience Required
Minimum 5 year(s)
Rigger Level 4 at UGL Limited
, New South Wales, Australia - Full Time
Skills Needed
Rigging, High Risk Work License, Working At Heights, Confined Space Entry, Heavy Industry Experience, Power Station Maintenance
Specialization
Requires a High Risk Work License (Advanced or Intermediate), White Card, and certifications in Working at Heights and Confined Space. Candidates must have 2-3 years of rigging experience, preferably in power stations or heavy industry.
Experience Required
Minimum 2 year(s)
Crane Operator at UGL Limited
Perth, Western Australia, Australia - Full Time
Skills Needed
Crane Operation, Brownfield Shutdown Execution, Oil & Gas Turnaround, Safety Management, Heavy Vehicle Operation, High Intensity Environment Execution
Specialization
Candidates must possess HRWL (C1, CN, or CO classes) with VOC, a heavy vehicle driver's license (HR, MC, or HC), and a Construction White Card. Proven experience in Oil & Gas turnarounds and brownfield operating environments is required.
Experience Required
Minimum 2 year(s)
Loading...