Y-Axis Jobs Logo
Send us feedback
telephone  +91 7670 800 001
Log in Sign up Try Premium

Software Engineer Jobs in Australia

About 1870 results in (4) seconds Clear Filters

Jobs Search

About 1870 results in (4) seconds
Sr. Tier III O&M Engineer at Leidos
Alice Springs, , Australia - Full Time
Skills Needed
Operations And Maintenance, Wan, Lan, Incident Resolution, Routing Changes, Firewall Changes, Troubleshooting, Network Management, Configuration Management, Performance Management, Boundary Protection, Cisco, Juniper, Ospf, Bgp, Mpls
Specialization
Candidates must have a TS SCI with a Poly and 16 years of relevant experience, which can be a combination of education and work history. Experience with boundary protection technologies and networking protocols is also required.
Experience Required
Minimum 10 year(s)
Secondary Design Engineer at UGL Limited
Sydney, New South Wales, Australia - Full Time
Skills Needed
Detailed Design, Specification Development, Interface Management, Relationship Building, Problem Solving, Ehv/Hv Secondary Systems, Strategic Planning, Conceptual Design, Protection Logic, Scada, Control System Design, Power Quality Analysis, Fault Level Analysis, Network Architecture, System Integration, Commissioning Support
Specialization
Candidates must possess an Electrical Engineering Degree and at least three years of experience in the design, integration, coordination, installation, and commissioning of electrical systems for high voltage power systems. Desired qualifications include knowledge of secondary system design from concept through detailed design, strong computer skills with relevant software, and excellent stakeholder management abilities.
Experience Required
Minimum 2 year(s)
Lead Reliability Engineer at Griffith University
Nathan, Queensland, Australia - Full Time
Skills Needed
Reliability Engineering, Peoplesoft, Automation, Cloud Native Infrastructure, Devops Practices, Observability Tools, Stakeholder Engagement, Change Management, Continuous Improvement, Mentoring, Database Administration, Incident Response, Service Level Management, Patching Strategy, Regulatory Compliance, Security Best Practices
Specialization
Proven expertise in ERP/database reliability is required, supported by postgraduate qualifications and extensive relevant experience. Candidates should have experience in stakeholder engagement, change management, and mentoring teams.
Experience Required
Minimum 10 year(s)
Site Reliability Engineer at Culture Amp
Melbourne, Victoria, Australia - Full Time
Skills Needed
Backend Programming Language, Typescript, Cdk, Cdktf, Golang, Ruby, Kotlin, Python, Distributed Systems, Event Driven Architecture, Kafka, Observability, Security, Ci/Cd, Configuration Management, Aws
Specialization
Candidates must have a command of at least one backend programming language and be comfortable learning TypeScript and Golang, with experience in distributed systems and AWS cloud being highly beneficial. The role requires participation in a paid weekly on-call rotation approximately once every six weeks.
Experience Required
Minimum 2 year(s)
Customer Success Engineer at Darktrace
Sydney, New South Wales, Australia - Full Time
Skills Needed
Cybersecurity, Ai, Technical Product Solutions, Deployment Health, Value Interventions, Use Case Identification, Customer Success, Communication, Collaboration, Networking, Cloud, Email Security, Incident Response, Architecture Design, Consultative Guidance, Presentation Skills
Specialization
Candidates need at least two years of experience in a relevant role, preferably within the cybersecurity industry, demonstrating strong knowledge of both on-premise and cloud networking environments. Essential qualifications include being a confident communicator capable of building business relationships and possessing knowledge in areas like Email Security, Incident Response, or Cloud Security Architecture.
Experience Required
Minimum 2 year(s)
Graduate Process Engineer at Alcoa Corporation - Brazil
Portland, Victoria, Australia - Full Time
Skills Needed
Process Problem Solving, Technical Efficiency, Communication, Collaboration, Accountability, Continuous Learning, Innovative Thinking, Mentoring
Specialization
Candidates should be on track to graduate by the end of 2026 or have recently completed a degree in Chemical Engineering or a related discipline. The ideal candidate will demonstrate a commitment to safety, collaboration, and continuous improvement.
Site Reliability Engineer at Culture Amp
Sydney, New South Wales, Australia - Full Time
Skills Needed
Backend Programming Language, Typescript, Cdk, Cdktf, Golang, Ruby, Kotlin, Python, Distributed Systems, Event Driven Architecture, Kafka, Observability, Security, Ci/Cd, Configuration Management, Aws
Specialization
Candidates must have a command of at least one backend programming language and be comfortable learning TypeScript and Golang, with experience in distributed systems and AWS cloud being highly beneficial. The role requires participation in a weekly on-call rotation and strong communication skills.
Experience Required
Minimum 2 year(s)
AI Engineering Consultant at Practiv
Sydney, New South Wales, Australia - Full Time
Skills Needed
Ai Agents, Rag, Mcp Servers, Python, Javascript, Langchain, Llamaindex, Google Adk, Apis, Prompt Engineering, Solution Architecture, Cloud Platforms, Security Best Practices, Project Management, Software Engineering, Devops
Specialization
Candidates must possess strong software engineering skills, proficiency in Python and/or JavaScript, and hands-on experience with LLM frameworks like LangChain or LlamaIndex, along with an understanding of RAG patterns. A genuine AI enthusiasm, strong project management skills, and the ability to ship production-grade solutions are essential.
Experience Required
Minimum 5 year(s)
Support Systems Engineers at Saab
Adelaide, South Australia, Australia - Full Time
Skills Needed
Systems Engineering, Integrated Logistics Support (Ils), Requirements Development, Support Facilities, Training Systems, Technical Integrator, Problem Solving, Stakeholder Engagement, Communication, Logistic Support Analysis (Lsa), C4isrew, Combat System Warfare, Project Management
Specialization
Essential requirements include experience across the systems engineering lifecycle with a strong focus on support systems or ILS, proven communication skills for developing technical artifacts, and the ability to work autonomously to meet deadlines. Desirable experience includes knowledge of C4ISREW/Combat System Warfare domains and experience with LSA in the Australian Defence environment.
Experience Required
Minimum 5 year(s)
Senior HV Design Engineer at AirTrunk
Sydney, New South Wales, Australia - Full Time
Skills Needed
Electrical Engineering, Hv Engineering, Transmission, Distribution, Energy Retailing, Hv Systems, Switchgear, Transformers, Protection Systems, Scada, Power System Tools, Etap, Pscad, Analytical Skills, Problem Solving, Stakeholder Engagement, Collaboration
Specialization
Candidates should have qualifications in Electrical Engineering and extensive HV engineering experience delivering 100MW+ projects. Strong technical expertise across HV systems and a collaborative working style are also required.
Experience Required
Minimum 10 year(s)
Senior Hydraulic Engineer at Aecom USA
Brisbane, Queensland, Australia - Full Time
Skills Needed
Hydraulic Design, Ncc Compliance, Australian Standards, Stakeholder Engagement, Technical Documentation, Project Delivery, Team Collaboration, Client Management, Mentoring, Ms Office, Bluebeam, Hydraulic Design Software, Statutory Approvals, Fire And Rescue Requirements
Specialization
Candidates should ideally possess 5+ years of professional experience in building services or hydraulic engineering consultancy, preferably with Chartered status or working towards professional registration. Essential qualifications include proven ability to produce high-quality technical documentation and strong knowledge of relevant Australian codes, standards, and approval processes.
Experience Required
Minimum 5 year(s)
Senior Hydraulic Engineer at Aecom USA
Brisbane, Queensland, Australia - Full Time
Skills Needed
Hydraulic Design, Technical Documentation, Ncc Compliance, Australian Standards, Stakeholder Engagement, Project Delivery, Technical Guidance, Ms Office, Bluebeam, Hydraulic Design Software, Client Management, Team Collaboration, Mentoring, Specification Writing, Statutory Approvals
Specialization
Candidates should ideally possess 5+ years of professional experience in building services or hydraulic engineering consultancy, preferably with Chartered status or working towards professional registration. Proven ability to produce high-quality technical documentation and strong knowledge of NCC, Australian Standards, and local authority processes are essential.
Experience Required
Minimum 5 year(s)
Senior Solutions Engineer at TeleClinic
, , Australia - Full Time
Skills Needed
Technical Consulting, Consultative Selling, Digital Transformation, Application Security, Customer Engagement, Solution Development, Relationship Building, Pre Sales Activities, Proofs Of Concept, Product Demos, Strategic Alignment, Customer Success, Software Modernization, Technical Support, Account Management, Industry Insights
Specialization
Candidates must have 8+ years of experience in technical consulting or related fields, or a relevant degree with lesser experience. Effective communication in English and the ability to travel up to 25% within APAC are also required.
Experience Required
Minimum 10 year(s)
Solutions Engineer (APAC) at Veriff
, , Australia - Full Time
Skills Needed
Sales Engineering, Solutions Consulting, Technical Insight, Product Knowledge, Communication Skills, Presentation Skills, Interpersonal Skills, Client Facing Skills, Collaboration, Customer Success, Saas, Software Development, Account Strategy, Integration Management, Bilingual, Idv
Specialization
Candidates should have 5+ years of experience in sales engineering or solutions consulting within the SaaS industry, along with a software development background. Excellent communication and interpersonal skills, as well as bilingual proficiency in English and Mandarin, are also required.
Experience Required
Minimum 5 year(s)
Graduate Process Engineer at Sedgman
Brisbane, Queensland, Australia - Full Time
Skills Needed
Learning, Flexibility, Adaptability, Autonomy, Teamwork, High Quality Outcomes, Outcome Driven, Self Motivated, Proactive Communication, Collaborative Communication, Stakeholder Relationship Building, Relocation, Innovation, Creative Solutions
Specialization
Candidates must be students graduating in 2026 in Process Engineering and must be an Australian citizen, permanent resident, or New Zealand citizen able to work lawfully in Australia. Successful candidates need capabilities such as adaptability, self-motivation, strong communication, and willingness to relocate for rotations.
Graduate Process Engineer at CIMIC
Perth, Western Australia, Australia - Full Time
Skills Needed
Learning, Flexibility, Adaptability, Autonomy, Teamwork, High Quality Outcomes, Outcome Driven, Self Motivated, Proactive Communication, Collaborative Communication, Relationship Building, Relocation, Innovation, Creative Solutions
Specialization
Candidates must be students graduating in 2026 in Chemical or Process Engineering and must hold Australian citizenship, Permanent Residency, or New Zealand citizenship to work lawfully in Australia. Successful candidates need capabilities such as adaptability, self-motivation, strong communication, and the willingness to relocate for project rotations.
Technical Safety Engineer at woodplc
Perth, Western Australia, Australia - Full Time
Skills Needed
Formal Safety Assessment (Fsa) Studies, Risk Based Decision Making, Design/Specification Of Safety Critical Equipment And Systems, Safety Regulations Knowledge, Industry Codes/Standards Knowledge, Report Writing, Oral Communication, Analytical Skills, Numerical Skills, Teamwork, Mentoring Junior Colleagues, Solutions Mindset, Task Management, Safety Engineering, Brownfields Experience
Specialization
Candidates must ideally hold full work rights for Australia and possess an Engineering degree, along with at least four years of experience in formal safety assessment studies and knowledge of relevant safety regulations and industry standards. Experience with Brownfields petroleum production/processing facilities is highly valued.
Experience Required
Minimum 2 year(s)
Senior Pavements Engineer at Arcadis
Pinkenba, Queensland, Australia - Full Time
Skills Needed
Pavement Design, Project Delivery, Pavement Evaluation, Rehabilitation Design, Pavement Materials, Innovation, Client Focus, Team Leadership, Technical Specifications, Pavement Technology, Design Software, Communication Skills, Interdisciplinary Management, Cost Analysis, High Quality Drawings, Self Management
Specialization
Candidates must have a relevant engineering degree and approximately 10+ years of Australian experience in pavement design. Additional expertise in pavement evaluation, materials, and design software is advantageous.
Experience Required
Minimum 10 year(s)
Graduate Process Engineer at CIMIC
Brisbane, Queensland, Australia - Full Time
Skills Needed
Learning, Flexibility, Adaptability, Autonomy, Teamwork, High Quality Outcomes, Outcome Driven, Self Motivated, Proactive Communication, Collaborative Communication, Relationship Building, Relocation, Innovation, Creative Solutions
Specialization
Applicants must be students graduating in 2026 with a degree in Process or Chemical Engineering and must be Australian citizens, permanent residents, or New Zealand citizens eligible to work lawfully in Australia. Successful candidates need capabilities such as adaptability, self-motivation, strong communication, and a willingness to relocate for project rotations.
Specialist Field Engineer at L3HHCM20
, Queensland, Australia - Full Time
Skills Needed
Rf Communications, Hf, Vhf, Uhf, Shf, Technical Support, System Design, Fault Diagnosis, System Integration, Training Delivery, Software Upgrades, Configuration Services, System Sustainment, Consultancy, Security Clearance Nv1, Military Communications
Specialization
Candidates must possess a current Commonwealth of Australia security clearance, minimum Negative Vetting (NV1), and essential military communications experience, including field engineering with tactical radio equipment. Qualifications require either a Certificate IV in Training and Assessment (TAE) or equivalent, alongside either a Bachelor’s Degree with 4 years of relevant experience or 8 years of related experience in lieu of a degree.
Experience Required
Minimum 5 year(s)
Sr. Tier III O&M Engineer at Leidos
Alice Springs, , Australia -
Full Time

Start Date

Immediate

Expiry Date

30 Apr, 26

Salary

0.0

Posted On

30 Jan, 26

Experience

10 year(s) or above

Remote Job

Yes

Telecommute

Yes

Sponsor Visa

No

Skills

Operations And Maintenance, WAN, LAN, Incident Resolution, Routing Changes, Firewall Changes, Troubleshooting, Network Management, Configuration Management, Performance Management, Boundary Protection, Cisco, Juniper, OSPF, BGP, MPLS

Industry

Defense and Space Manufacturing

Description
The Digital Modernization Sector at Leidos is seeking a Sr. Tier III operations and maintenance (O&M) engineer to support various WAN and LAN networks. Will provide incident resolution, routing changes, firewall changes; act as subject matter expert in WAN and LAN technologies; support intra- and inter- net and other data communications systems or segments of networked system. Description of Job Duties/Responsibilities: Support operations and maintenance activities and administer networks including LAN and WAN technologies such as OSPF, BGP, VRF’s, VLAN’s, VRRP, MPLS. Monitor the performance of systems and networks Configure, and test hardware, networking software and operating system software Review user requests for upgrades or additions to the network to assess impact on network performance and provide advice and guidance on the most practical technical approach to meeting user requirements Perform long term O&M activities to include tier 3 troubleshooting and problem resolution Prepare troubleshooting procedures for restoring the network to optimal performance levels Provide fault management for the network and supports performance management functions Respond, isolate, and resolve network troubles Execute reporting functions and data input associated with network management Coordinate with configuration management and implementation teams Analyze network characteristics (e.g., traffic, connect time, transmission speeds, packet sizes, and throughput); recommend procurement, removals, and modifications to network components Optimize network topologies and site configurations. Coordinate requirements with users Assess and document current site network configuration and user requirements Maintain operating systems, communications software, data base packages, compilers, assemblers, and utility programs Apply software, hardware, and standards information technology skills in the analysis, specification, development, integration, and acquisition of open systems for Information Management (IM) applications Ensure these systems and applications are compliant with standards for open systems architectures, reference models, and profiles of standards - such as the IEEE Open Systems Environment (OSE) reference model - as they apply to the implementation and specification of IM solutions on the application platform, across the application program interface (API), and the external environment/software application May have up to 10% COMSEC responsibilities, as needed. Subject to be called in during afterhours for incident resolution. Requirements TS SCI with a Poly Candidate must have 16 years of experience that can be a combination of work history and education. This equates to a Doctorate and 8 years, master’s and 10 years, bachelor’s and 12 years, associates and 14 years or HS diploma and 16 years. Must comply with DoD 8570 Information Assurance Technical (IAT) Level 2. Experience in configuring and troubleshooting boundary protection technologies such as Palo Alto, Cisco ASA, and Forcepoint appliances Experience with configuring and troubleshooting Juniper and Cisco routers and switches. Experience with protocols such as OSPF, BGP, VPN’s, VRF’s, MPLS. Working knowledge of boundary protection best practices Understanding of routing, switching, Internet Protocol (IP) subnet, Network Address Translation (NAT) and security technologies Demonstrated ability to engineer and modify rulesets to allow connectivity for new customer requirements Demonstrated ability to read, understand, and develop schematic diagrams, technical manuals, and documentation such that the supported equipment and software can be maintained with minimal training Working knowledge of Service Now or similar IT Service Management (ITSM) products Superior verbal and written communication skills Intermediate-level knowledge of MS Office products Word, Excel, PowerPoint, and Visio If you're looking for comfort, keep scrolling. At Leidos, we outthink, outbuild, and outpace the status quo — because the mission demands it. We're not hiring followers. We're recruiting the ones who disrupt, provoke, and refuse to fail. Step 10 is ancient history. We're already at step 30 — and moving faster than anyone else dares. Original Posting: For U.S. Positions: While subject to change based on business needs, Leidos reasonably anticipates that this job requisition will remain open for at least 3 days with an anticipated close date of no earlier than 3 days after the original posting date as listed above. Pay Range: The Leidos pay range for this job level is a general guideline only and not a guarantee of compensation or salary. Additional factors considered in extending an offer include (but are not limited to) responsibilities of the job, education, experience, knowledge, skills, and abilities, as well as internal equity, alignment with market data, applicable bargaining agreement (if any), or other law. Leidos Leidos is a Fortune 500® innovation company rapidly addressing the world's most vexing challenges in national security and health. The company's global workforce of 47,000 collaborates to create smarter technology solutions for customers in heavily regulated industries. Headquartered in Reston, Virginia, Leidos reported annual revenue of approximately $15.4 billion for the fiscal year ended December 29, 2023. For more information visit www.Leidos.com. Pay and Benefits Pay and benefits are fundamental to any career decision. That's why we craft compensation packages that reflect the importance of the work we do for our customers. Employment benefits include competitive compensation, Health and Wellness programs, Income Protection, Paid Leave and Retirement. More details are available here. Securing Your Data Leidos will never ask you to provide payment-related information at any part of the employment application process. And Leidos will communicate with you only through emails that are sent from a Leidos.com email address. If you receive an email purporting to be from Leidos that asks for payment-related information or any other personal information, please report the email to spam.leidos@leidos.com. Commitment and Diversity All qualified applicants will receive consideration for employment without regard to sex, race, ethnicity, age, national origin, citizenship, religion, physical or mental disability, medical condition, genetic information, pregnancy, family structure, marital status, ancestry, domestic partner status, sexual orientation, gender identity or expression, veteran or military status, or any other basis prohibited by law. Leidos will also consider for employment qualified applicants with criminal histories consistent with relevant laws.
Responsibilities
The Sr. Tier III O&M Engineer will support operations and maintenance activities for WAN and LAN networks, providing incident resolution and acting as a subject matter expert. Responsibilities include monitoring system performance, configuring hardware and software, and performing tier 3 troubleshooting.
Sr. Tier III O&M Engineer at Leidos
Alice Springs, , Australia - Full Time
Skills Needed
Operations And Maintenance, Wan, Lan, Incident Resolution, Routing Changes, Firewall Changes, Troubleshooting, Network Management, Configuration Management, Performance Management, Boundary Protection, Cisco, Juniper, Ospf, Bgp, Mpls
Specialization
Candidates must have a TS SCI with a Poly and 16 years of relevant experience, which can be a combination of education and work history. Experience with boundary protection technologies and networking protocols is also required.
Experience Required
Minimum 10 year(s)
Secondary Design Engineer at UGL Limited
Sydney, New South Wales, Australia - Full Time
Skills Needed
Detailed Design, Specification Development, Interface Management, Relationship Building, Problem Solving, Ehv/Hv Secondary Systems, Strategic Planning, Conceptual Design, Protection Logic, Scada, Control System Design, Power Quality Analysis, Fault Level Analysis, Network Architecture, System Integration, Commissioning Support
Specialization
Candidates must possess an Electrical Engineering Degree and at least three years of experience in the design, integration, coordination, installation, and commissioning of electrical systems for high voltage power systems. Desired qualifications include knowledge of secondary system design from concept through detailed design, strong computer skills with relevant software, and excellent stakeholder management abilities.
Experience Required
Minimum 2 year(s)
Lead Reliability Engineer at Griffith University
Nathan, Queensland, Australia - Full Time
Skills Needed
Reliability Engineering, Peoplesoft, Automation, Cloud Native Infrastructure, Devops Practices, Observability Tools, Stakeholder Engagement, Change Management, Continuous Improvement, Mentoring, Database Administration, Incident Response, Service Level Management, Patching Strategy, Regulatory Compliance, Security Best Practices
Specialization
Proven expertise in ERP/database reliability is required, supported by postgraduate qualifications and extensive relevant experience. Candidates should have experience in stakeholder engagement, change management, and mentoring teams.
Experience Required
Minimum 10 year(s)
Site Reliability Engineer at Culture Amp
Melbourne, Victoria, Australia - Full Time
Skills Needed
Backend Programming Language, Typescript, Cdk, Cdktf, Golang, Ruby, Kotlin, Python, Distributed Systems, Event Driven Architecture, Kafka, Observability, Security, Ci/Cd, Configuration Management, Aws
Specialization
Candidates must have a command of at least one backend programming language and be comfortable learning TypeScript and Golang, with experience in distributed systems and AWS cloud being highly beneficial. The role requires participation in a paid weekly on-call rotation approximately once every six weeks.
Experience Required
Minimum 2 year(s)
Customer Success Engineer at Darktrace
Sydney, New South Wales, Australia - Full Time
Skills Needed
Cybersecurity, Ai, Technical Product Solutions, Deployment Health, Value Interventions, Use Case Identification, Customer Success, Communication, Collaboration, Networking, Cloud, Email Security, Incident Response, Architecture Design, Consultative Guidance, Presentation Skills
Specialization
Candidates need at least two years of experience in a relevant role, preferably within the cybersecurity industry, demonstrating strong knowledge of both on-premise and cloud networking environments. Essential qualifications include being a confident communicator capable of building business relationships and possessing knowledge in areas like Email Security, Incident Response, or Cloud Security Architecture.
Experience Required
Minimum 2 year(s)
Graduate Process Engineer at Alcoa Corporation - Brazil
Portland, Victoria, Australia - Full Time
Skills Needed
Process Problem Solving, Technical Efficiency, Communication, Collaboration, Accountability, Continuous Learning, Innovative Thinking, Mentoring
Specialization
Candidates should be on track to graduate by the end of 2026 or have recently completed a degree in Chemical Engineering or a related discipline. The ideal candidate will demonstrate a commitment to safety, collaboration, and continuous improvement.
Site Reliability Engineer at Culture Amp
Sydney, New South Wales, Australia - Full Time
Skills Needed
Backend Programming Language, Typescript, Cdk, Cdktf, Golang, Ruby, Kotlin, Python, Distributed Systems, Event Driven Architecture, Kafka, Observability, Security, Ci/Cd, Configuration Management, Aws
Specialization
Candidates must have a command of at least one backend programming language and be comfortable learning TypeScript and Golang, with experience in distributed systems and AWS cloud being highly beneficial. The role requires participation in a weekly on-call rotation and strong communication skills.
Experience Required
Minimum 2 year(s)
AI Engineering Consultant at Practiv
Sydney, New South Wales, Australia - Full Time
Skills Needed
Ai Agents, Rag, Mcp Servers, Python, Javascript, Langchain, Llamaindex, Google Adk, Apis, Prompt Engineering, Solution Architecture, Cloud Platforms, Security Best Practices, Project Management, Software Engineering, Devops
Specialization
Candidates must possess strong software engineering skills, proficiency in Python and/or JavaScript, and hands-on experience with LLM frameworks like LangChain or LlamaIndex, along with an understanding of RAG patterns. A genuine AI enthusiasm, strong project management skills, and the ability to ship production-grade solutions are essential.
Experience Required
Minimum 5 year(s)
Support Systems Engineers at Saab
Adelaide, South Australia, Australia - Full Time
Skills Needed
Systems Engineering, Integrated Logistics Support (Ils), Requirements Development, Support Facilities, Training Systems, Technical Integrator, Problem Solving, Stakeholder Engagement, Communication, Logistic Support Analysis (Lsa), C4isrew, Combat System Warfare, Project Management
Specialization
Essential requirements include experience across the systems engineering lifecycle with a strong focus on support systems or ILS, proven communication skills for developing technical artifacts, and the ability to work autonomously to meet deadlines. Desirable experience includes knowledge of C4ISREW/Combat System Warfare domains and experience with LSA in the Australian Defence environment.
Experience Required
Minimum 5 year(s)
Senior HV Design Engineer at AirTrunk
Sydney, New South Wales, Australia - Full Time
Skills Needed
Electrical Engineering, Hv Engineering, Transmission, Distribution, Energy Retailing, Hv Systems, Switchgear, Transformers, Protection Systems, Scada, Power System Tools, Etap, Pscad, Analytical Skills, Problem Solving, Stakeholder Engagement, Collaboration
Specialization
Candidates should have qualifications in Electrical Engineering and extensive HV engineering experience delivering 100MW+ projects. Strong technical expertise across HV systems and a collaborative working style are also required.
Experience Required
Minimum 10 year(s)
Senior Hydraulic Engineer at Aecom USA
Brisbane, Queensland, Australia - Full Time
Skills Needed
Hydraulic Design, Ncc Compliance, Australian Standards, Stakeholder Engagement, Technical Documentation, Project Delivery, Team Collaboration, Client Management, Mentoring, Ms Office, Bluebeam, Hydraulic Design Software, Statutory Approvals, Fire And Rescue Requirements
Specialization
Candidates should ideally possess 5+ years of professional experience in building services or hydraulic engineering consultancy, preferably with Chartered status or working towards professional registration. Essential qualifications include proven ability to produce high-quality technical documentation and strong knowledge of relevant Australian codes, standards, and approval processes.
Experience Required
Minimum 5 year(s)
Senior Hydraulic Engineer at Aecom USA
Brisbane, Queensland, Australia - Full Time
Skills Needed
Hydraulic Design, Technical Documentation, Ncc Compliance, Australian Standards, Stakeholder Engagement, Project Delivery, Technical Guidance, Ms Office, Bluebeam, Hydraulic Design Software, Client Management, Team Collaboration, Mentoring, Specification Writing, Statutory Approvals
Specialization
Candidates should ideally possess 5+ years of professional experience in building services or hydraulic engineering consultancy, preferably with Chartered status or working towards professional registration. Proven ability to produce high-quality technical documentation and strong knowledge of NCC, Australian Standards, and local authority processes are essential.
Experience Required
Minimum 5 year(s)
Senior Solutions Engineer at TeleClinic
, , Australia - Full Time
Skills Needed
Technical Consulting, Consultative Selling, Digital Transformation, Application Security, Customer Engagement, Solution Development, Relationship Building, Pre Sales Activities, Proofs Of Concept, Product Demos, Strategic Alignment, Customer Success, Software Modernization, Technical Support, Account Management, Industry Insights
Specialization
Candidates must have 8+ years of experience in technical consulting or related fields, or a relevant degree with lesser experience. Effective communication in English and the ability to travel up to 25% within APAC are also required.
Experience Required
Minimum 10 year(s)
Solutions Engineer (APAC) at Veriff
, , Australia - Full Time
Skills Needed
Sales Engineering, Solutions Consulting, Technical Insight, Product Knowledge, Communication Skills, Presentation Skills, Interpersonal Skills, Client Facing Skills, Collaboration, Customer Success, Saas, Software Development, Account Strategy, Integration Management, Bilingual, Idv
Specialization
Candidates should have 5+ years of experience in sales engineering or solutions consulting within the SaaS industry, along with a software development background. Excellent communication and interpersonal skills, as well as bilingual proficiency in English and Mandarin, are also required.
Experience Required
Minimum 5 year(s)
Graduate Process Engineer at Sedgman
Brisbane, Queensland, Australia - Full Time
Skills Needed
Learning, Flexibility, Adaptability, Autonomy, Teamwork, High Quality Outcomes, Outcome Driven, Self Motivated, Proactive Communication, Collaborative Communication, Stakeholder Relationship Building, Relocation, Innovation, Creative Solutions
Specialization
Candidates must be students graduating in 2026 in Process Engineering and must be an Australian citizen, permanent resident, or New Zealand citizen able to work lawfully in Australia. Successful candidates need capabilities such as adaptability, self-motivation, strong communication, and willingness to relocate for rotations.
Graduate Process Engineer at CIMIC
Perth, Western Australia, Australia - Full Time
Skills Needed
Learning, Flexibility, Adaptability, Autonomy, Teamwork, High Quality Outcomes, Outcome Driven, Self Motivated, Proactive Communication, Collaborative Communication, Relationship Building, Relocation, Innovation, Creative Solutions
Specialization
Candidates must be students graduating in 2026 in Chemical or Process Engineering and must hold Australian citizenship, Permanent Residency, or New Zealand citizenship to work lawfully in Australia. Successful candidates need capabilities such as adaptability, self-motivation, strong communication, and the willingness to relocate for project rotations.
Technical Safety Engineer at woodplc
Perth, Western Australia, Australia - Full Time
Skills Needed
Formal Safety Assessment (Fsa) Studies, Risk Based Decision Making, Design/Specification Of Safety Critical Equipment And Systems, Safety Regulations Knowledge, Industry Codes/Standards Knowledge, Report Writing, Oral Communication, Analytical Skills, Numerical Skills, Teamwork, Mentoring Junior Colleagues, Solutions Mindset, Task Management, Safety Engineering, Brownfields Experience
Specialization
Candidates must ideally hold full work rights for Australia and possess an Engineering degree, along with at least four years of experience in formal safety assessment studies and knowledge of relevant safety regulations and industry standards. Experience with Brownfields petroleum production/processing facilities is highly valued.
Experience Required
Minimum 2 year(s)
Senior Pavements Engineer at Arcadis
Pinkenba, Queensland, Australia - Full Time
Skills Needed
Pavement Design, Project Delivery, Pavement Evaluation, Rehabilitation Design, Pavement Materials, Innovation, Client Focus, Team Leadership, Technical Specifications, Pavement Technology, Design Software, Communication Skills, Interdisciplinary Management, Cost Analysis, High Quality Drawings, Self Management
Specialization
Candidates must have a relevant engineering degree and approximately 10+ years of Australian experience in pavement design. Additional expertise in pavement evaluation, materials, and design software is advantageous.
Experience Required
Minimum 10 year(s)
Graduate Process Engineer at CIMIC
Brisbane, Queensland, Australia - Full Time
Skills Needed
Learning, Flexibility, Adaptability, Autonomy, Teamwork, High Quality Outcomes, Outcome Driven, Self Motivated, Proactive Communication, Collaborative Communication, Relationship Building, Relocation, Innovation, Creative Solutions
Specialization
Applicants must be students graduating in 2026 with a degree in Process or Chemical Engineering and must be Australian citizens, permanent residents, or New Zealand citizens eligible to work lawfully in Australia. Successful candidates need capabilities such as adaptability, self-motivation, strong communication, and a willingness to relocate for project rotations.
Specialist Field Engineer at L3HHCM20
, Queensland, Australia - Full Time
Skills Needed
Rf Communications, Hf, Vhf, Uhf, Shf, Technical Support, System Design, Fault Diagnosis, System Integration, Training Delivery, Software Upgrades, Configuration Services, System Sustainment, Consultancy, Security Clearance Nv1, Military Communications
Specialization
Candidates must possess a current Commonwealth of Australia security clearance, minimum Negative Vetting (NV1), and essential military communications experience, including field engineering with tactical radio equipment. Qualifications require either a Certificate IV in Training and Assessment (TAE) or equivalent, alongside either a Bachelor’s Degree with 4 years of relevant experience or 8 years of related experience in lieu of a degree.
Experience Required
Minimum 5 year(s)