Aerotek Manufacturing Ltd Jobs overseas

About 13616 results in (3) seconds Clear Filters

Jobs Search

About 13616 results in (3) seconds
2nd Shift Manufacturing Team Leader at Knowles Corporation
Liberty, South Carolina, United States - Full Time
Skills Needed
Safety First Mindset, Erp Systems, Excel, Mechanical Drawings, Electrical Drawings, Reliability Tools, Lean Tools, Root Cause Analysis, Problem Solving, 5s, Kaizen, Standard Work, Coaching, Inventory Management, Workflow Coordination, Ehs Compliance
Specialization
Candidates must have a high school diploma or GED and possess practical knowledge of safety protocols and manufacturing processes. Proficiency in ERP systems and problem-solving skills are also essential.
Experience Required
Minimum 2 year(s)
Manufacturing Engineering Supervisor at Knowles Corporation
Cazenovia, New York, United States - Full Time
Skills Needed
Process Engineering, Semiconductor, Thin Film Fab, Ipc Standards, Mil Standards, Job Instructions, Work Instructions, Data Analysis, Lean Six Sigma, Continuous Improvement, Communication Skills, Team Collaboration, Iso Standards, Root Cause Analysis, Engineering Trials, Project Management
Specialization
Candidates should have at least 3 years of experience in process engineering within a semiconductor or thin-film environment, along with a BS in engineering or physical sciences. Proficiency in data analysis tools and Lean Six Sigma principles is also required.
Experience Required
Minimum 5 year(s)
1st Shift Manufacturing Team Leader at Knowles Corporation
Liberty, South Carolina, United States - Full Time
Skills Needed
Safety First Mindset, Erp Systems, Excel, Mechanical Drawings, Electrical Drawings, Reliability Tools, Lean Tools, Root Cause Analysis, Problem Solving, 5s, Kaizen, Standard Work, Coaching, Inventory Management, Workflow Coordination, Ehs Compliance
Specialization
Candidates should have a safety-first mindset and practical knowledge of safety protocols, as well as proficiency in ERP systems and Excel. A high school diploma or GED is required, along with experience in applying reliability and lean tools.
Experience Required
Minimum 2 year(s)
Manufacturing Engineer (all genders) at HelloFresh
Verden (Aller), Lower Saxony, Germany - Full Time
Skills Needed
Manufacturing Engineering, Project Management, Process Optimization, Standard Operating Procedures, Data Analysis, Intercultural Competence, Technical Solutions, Food Manufacturing, Lean Six Sigma, Kaizen, Communication Skills, Efficiency Improvement, Regulatory Documentation, Collaboration, Root Cause Analysis, Performance Metrics
Specialization
Candidates should have a Bachelor's degree in a technical field and several years of experience in food manufacturing, including knowledge of FDA/USDA standards. Skills in project management, process optimization, and developing SOPs are essential.
Experience Required
Minimum 5 year(s)
QA Officer Injectable Manufacturing at UCB SA Canada
Braine-l'Alleud, Wallonia, Belgium - Full Time
Skills Needed
Quality Assurance, Injectable Manufacturing, Gmp Compliance, Technology Transfer, Process Validation, Cleaning Validation, Stability Studies, Change Control, Failure Investigation, Deviation Management, Capa Plans, Sop Review, Auditing Support, Aseptic Techniques, Fact Based Decision Making, Interpersonal Skills
Specialization
Candidates must possess a Bachelor's or Master's degree in a relevant scientific discipline and extensive experience in pharmaceutical QA, with injectables experience being highly advantageous. Fluency in both English and French, along with strong decision-making, accountability, discretion, and teamwork skills, are essential for this role.
Experience Required
Minimum 5 year(s)
HR Business Partner - Manufacturing at Americhem
Liberty, North Carolina, United States - Full Time
Skills Needed
Strategic Hr Leadership, Talent Management, Employee Engagement, Organizational Capability, Workforce Planning, Talent Acquisition, Performance Management, Change Management, Interpersonal Skills, Problem Solving, Adaptability, Hr Best Practices, Communication Skills, Safety Culture, Training Programs, Hr Functions
Specialization
A bachelor's degree in HR, Business, or a related field is required, along with 5+ years of progressive HR experience, preferably in manufacturing. Strong leadership and communication skills are essential, along with the ability to manage HR functions across multiple sites.
Experience Required
Minimum 5 year(s)
Woodworking Handyman - Manufacturing at ALLIED PLASTICS LLC
Town of Randall, Wisconsin, United States - Full Time
Skills Needed
Carpentry, Woodworking, Fabrication, Sanding, Cutting, Shaping, Attention To Detail, Motivation To Learn
Specialization
A strong background in carpentry or woodworking is ideal, but entry-level candidates are welcome to apply. A good attitude and willingness to learn are essential for success in this role.
Manufacturing Technician - 2nd Shift at WEG Canada
Minneapolis, Minnesota, United States - Full Time
Skills Needed
Assembly, Lamination, Winding, Testing, Troubleshooting, Safety Standards Adherence, Motor Assembly, Generator Assembly, Drive Assembly, Stator Winding, Rotor Assembly, Ac Rotating Equipment, Dc Rotating Equipment, Skills Matrix Advancement
Specialization
A high school diploma is preferred but not mandatory for this role. Candidates must be capable of performing tasks related to Assembly, Lamination, or Winding, which involves physical activities such as lifting up to 50 lbs and working in various physical positions, including heights or confined spaces.
Manufacturing Technician - 1st Shift at WEG Canada
Minneapolis, Minnesota, United States - Full Time
Skills Needed
Assembly, Lamination, Winding, Motor Assembly, Generator Assembly, Drive Assembly, Stator Winding, Pole Winding, Exciter Winding, Rotor Assembly, Electrical Ac Equipment, Electrical Dc Equipment, Testing, Troubleshooting, Safety Standards Adherence, Skills Matrix Advancement
Specialization
A high school diploma is preferred but not required for this position. Candidates must be capable of performing tasks related to Assembly, Lamination, or Winding, which includes physical requirements such as lifting up to 50 lbs and working in various physical positions.
Production Lead - Food Manufacturing at GLP Transit
Kingsport, Tennessee, United States - Full Time
Skills Needed
Production Coordination, Team Leadership, Quality Assurance, Safety Awareness, Food Safety, Gmp Training, Documentation, Continuous Improvement, Communication, Problem Solving, Training, Supervision, Manufacturing Experience, Ppe Knowledge, Haccp Familiarity, Sqf Familiarity
Specialization
Candidates should have a minimum of 2 years of experience in a manufacturing facility and a high school diploma or equivalent. Familiarity with quality and food safety programs is preferred.
Experience Required
Minimum 2 year(s)
Production Crew Lead - Manufacturing at Balanced Body Inc
Sacramento, California, United States - Full Time
Skills Needed
Leadership, Coaching, Mentoring, Communication, Problem Solving, Time Management, Inventory Management, Safety Compliance, Team Building, Adaptability, Training, Conflict Resolution, Attention To Detail, Initiative, Interpersonal Skills, Decision Making
Specialization
Candidates should have strong communication skills, the ability to prioritize tasks, and a strong attendance record. They must also be able to lift up to 50lbs and maintain a clean work area.
Experience Required
Minimum 2 year(s)
Manufacturing Production Crew Leader at Balanced Body Inc
Sacramento, California, United States - Full Time
Skills Needed
Leadership, Coaching, Mentoring, Communication, Problem Solving, Time Management, Team Building, Inventory Management, Safety Compliance, Adaptability, Training, Conflict Resolution, Attention To Detail, Initiative, Interpersonal Skills, Active Listening
Specialization
Candidates should have strong communication skills, the ability to prioritize tasks, and a strong attendance record. They must also be able to lift up to 50lbs and maintain a clean work area.
Experience Required
Minimum 2 year(s)
Manufacturing Engineering Technician at Q-Lab Corporation
Westlake, Ohio, United States - Full Time
Skills Needed
Electro Mechanical Test Fixture Fabrication, Electro Mechanical Test Fixture Building, Electro Mechanical Test Fixture Wiring, Tooling Design Collaboration, Component Sourcing, Electrical Troubleshooting, Controls Troubleshooting, Machine Troubleshooting, Industrial Wiring Design, Fabrication, Machine Shop Skills, Pcb Soldering, Pcb Assembly, Plc Programming, Laser Welding, Tig Welding
Specialization
Candidates must have an Associate's Degree in Engineering Technology or equivalent work experience, coupled with over 10 years in electrical and/or mechanical device manufacturing, including expertise in industrial wiring methods and design. Proficiency in basic fabrication, machine shop skills, and Microsoft Office is also required.
Experience Required
Minimum 10 year(s)
Engineering Manager - Manufacturing at Turner Townsend
Sheffield, England, United Kingdom - Full Time
Skills Needed
Design Management, Project Management, Collaboration, Problem Solving, Building Information Modelling, Construction Knowledge, Communication Skills, People Management, Time Management, Cad, Autocad, Revit, Customer Satisfaction, Integrated Design Delivery, Engineering Discipline, Multi Disciplinary Teams
Specialization
Candidates should have a minimum of 5 years of design and management experience, preferably in buildings fit-out, defence industry, and machine integration. A degree or equivalent in an engineering discipline is required, along with strong knowledge of construction methods and design solutions.
Experience Required
Minimum 5 year(s)
Manufacturing Engineer - Electronics at Paxton Access
Brighton, England, United Kingdom - Full Time
Skills Needed
Manufacturing Engineering, Electro Mechanical Production, New Product Introduction, Design For Manufacturability, Lean Manufacturing, Cost Reduction, Quality Improvement, Process Optimization, Total Productive Maintenance, Collaboration, Mentoring, Decision Making, Production Cost Calculation, Manufacturing Processes, Quality Standards, Engineering Support
Specialization
Experience in a similar Engineering role within Electro-mechanical production is required. Familiarity with manufacturing equipment, maintenance protocols, and processes including New Product Introduction and Design for Manufacturability is also necessary.
Experience Required
Minimum 2 year(s)
Electronics Manufacturing Supervisor at Arrow International, Inc.
Brooklyn, Ohio, United States - Full Time
Skills Needed
Electronics Assembly, Leadership, Quality Control, Continuous Improvement, Production Flow, Coaching, Mentoring, Inventory Control, Safety Standards, Teamwork, Communication, Documentation, Technical Understanding, Problem Solving, Organizational Skills, Performance Management
Specialization
Candidates should have over 5 years of experience supervising in an electronics or electro-mechanical assembly environment and possess a strong understanding of production flow and assembly processes. Leadership experience in coaching and developing associates is essential, along with a preferred degree in a related technical field.
Experience Required
Minimum 5 year(s)
Electrical Engineer (Manufacturing) at Revere Copper Products, Inc
City of Rome, New York, United States - Full Time
Skills Needed
Electrical Engineering, Project Management, Power Distribution, Preventative Maintenance, Troubleshooting, Plc Programming, Hmi Programming, Digital Drives, Electrical Code, Union Environment, Heavy Industrial Experience, Equipment Modifications, Construction Supervision, Plant Infrastructure, High Voltage Systems, Operational Efficiency
Specialization
Candidates should have 7-10 years of experience as an Electrical Engineer with knowledge in power distribution design and equipment maintenance. Familiarity with PLCs, HMI, and programming skills are essential.
Experience Required
Minimum 5 year(s)
External Manufacturing NPI Engineer at onsemi
Zhubei, Sichuan, China - Full Time
Skills Needed
Manufacturing, Engineering, Npi, Automotive, Industrial, Power Technologies, Sensing Technologies, Climate Change, Sustainable Energy, Factory Automation, Vehicle Electrification, Advanced Safety, Research, Design, Innovation, Problem Solving
Specialization
Candidates should have experience in manufacturing engineering, particularly in new product introduction (NPI). A background in automotive or industrial markets is preferred, along with skills in problem-solving and innovation.
Experience Required
Minimum 2 year(s)
Manager of Manufacturing Operations at Image Associates Inc.
Oklahoma City, Oklahoma, United States - Full Time
Skills Needed
Manufacturing Operations, Operations Improvement, Leadership, Employee Development, Process Ownership, Regulatory Compliance, Change Management, Process Improvement, Optimization, Team Building, Performance Management, Quality Assurance, Technical Problem Solving, Union Relations, Strategic Goals Alignment, Resource Management
Specialization
A Bachelor’s degree in Engineering or Manufacturing is required along with over 7 years of manufacturing experience, including 5 years in operations leadership. Experience in change management and process improvement is essential.
Experience Required
Minimum 10 year(s)
Industrial Manufacturing Electrician at Ethox Chemicals, LLC
Greenville, South Carolina, United States - Full Time
Skills Needed
Electrical Maintenance, Repairs, Installations, Conduit Work, Motor Controls, High Voltage Systems, Electrical Schematics, Blueprints, Troubleshooting, Preventive Maintenance, Hazmat Operations, Communication Skills, Attention To Detail, Technical Skills, Team Leadership, Maintenance Software
Specialization
Candidates should have a high school diploma or equivalent, with a preference for an associate degree or electrical certification. A minimum of 10 years of industrial electrical maintenance experience is required, along with proficiency in conduit installation and troubleshooting.
Experience Required
Minimum 10 year(s)
2nd Shift Manufacturing Team Leader at Knowles Corporation
Liberty, South Carolina, United States -
Full Time


Start Date

Immediate

Expiry Date

10 May, 26

Salary

0.0

Posted On

09 Feb, 26

Experience

2 year(s) or above

Remote Job

Yes

Telecommute

Yes

Sponsor Visa

No

Skills

Safety-First Mindset, ERP Systems, Excel, Mechanical Drawings, Electrical Drawings, Reliability Tools, Lean Tools, Root-Cause Analysis, Problem-Solving, 5S, Kaizen, Standard Work, Coaching, Inventory Management, Workflow Coordination, EHS Compliance

Industry

electrical;Appliances;and Electronics Manufacturing

Description
Job Responsibilities • Maintain 5S+ standards across all assigned areas to ensure organization and efficiency. • Maintain a safe and organized work environment, ensuring storage areas meet 5S and EHS guidelines. • Ensure compliance with EHS and quality requirements (LOTO, hot work, ESD handling, calibration/verification, documentation). • Enforce safety protocols, including proper use of PPE by all team members. • Lead and direct team operations, ensuring products are assembled accurately and efficiently. • Manage and oversee line activities, including scheduling, task assignments, and workflow coordination. • Ensure compliance with assembly procedures and quality standards throughout production. • Train new team members on assembly processes and safety requirements. • Provide ongoing coaching and support to maintain high performance and quality standards. • Monitor and manage inventory, identifying and disposing of excess or obsolete materials promptly. • Adapt operations to changing conditions, including material shortages, manpower fluctuations, and unexpected challenges. • Resolve workflow disruptions by implementing effective solutions. • Identify and drive process improvements, performing root cause analysis to address issues. • Report production metrics to supervisors or operations management. • Collaborate with other departments to ensure smooth workflow and efficient production processes • Kit and stage materials, parts, tools, and permits; coordinate with Stores to maintain MRO spares availability and min/max levels. • Monitor and report KPIs (schedule compliance, PM completion, wrench time, MTTR/MTBF, backlog health) and drive corrective actions. Skills, Knowledge, and Expertise • Safety-first mindset with practical knowledge of LOTO, confined space, electrical safety/arc flash, and permit systems. • Proficiency with ERP systems (SAP, Oracle, etc.) and Excel; able to build reports and dashboards. • Ability to read mechanical/electrical drawings; convert technical information into executable job plans. • Experience applying reliability and lean tools: RCCA, TPM, 5S, Kaizen, standard work.• Root-cause analysis capability (5-Why, fishbone/Ishikawa) and disciplined problem-solving. • High School Diploma or GED required
Responsibilities
The Manufacturing Team Leader is responsible for maintaining safety and efficiency standards while leading team operations to ensure accurate product assembly. They will also manage line activities, train new team members, and drive process improvements.
2nd Shift Manufacturing Team Leader at Knowles Corporation
Liberty, South Carolina, United States - Full Time
Skills Needed
Safety First Mindset, Erp Systems, Excel, Mechanical Drawings, Electrical Drawings, Reliability Tools, Lean Tools, Root Cause Analysis, Problem Solving, 5s, Kaizen, Standard Work, Coaching, Inventory Management, Workflow Coordination, Ehs Compliance
Specialization
Candidates must have a high school diploma or GED and possess practical knowledge of safety protocols and manufacturing processes. Proficiency in ERP systems and problem-solving skills are also essential.
Experience Required
Minimum 2 year(s)
Manufacturing Engineering Supervisor at Knowles Corporation
Cazenovia, New York, United States - Full Time
Skills Needed
Process Engineering, Semiconductor, Thin Film Fab, Ipc Standards, Mil Standards, Job Instructions, Work Instructions, Data Analysis, Lean Six Sigma, Continuous Improvement, Communication Skills, Team Collaboration, Iso Standards, Root Cause Analysis, Engineering Trials, Project Management
Specialization
Candidates should have at least 3 years of experience in process engineering within a semiconductor or thin-film environment, along with a BS in engineering or physical sciences. Proficiency in data analysis tools and Lean Six Sigma principles is also required.
Experience Required
Minimum 5 year(s)
1st Shift Manufacturing Team Leader at Knowles Corporation
Liberty, South Carolina, United States - Full Time
Skills Needed
Safety First Mindset, Erp Systems, Excel, Mechanical Drawings, Electrical Drawings, Reliability Tools, Lean Tools, Root Cause Analysis, Problem Solving, 5s, Kaizen, Standard Work, Coaching, Inventory Management, Workflow Coordination, Ehs Compliance
Specialization
Candidates should have a safety-first mindset and practical knowledge of safety protocols, as well as proficiency in ERP systems and Excel. A high school diploma or GED is required, along with experience in applying reliability and lean tools.
Experience Required
Minimum 2 year(s)
Manufacturing Engineer (all genders) at HelloFresh
Verden (Aller), Lower Saxony, Germany - Full Time
Skills Needed
Manufacturing Engineering, Project Management, Process Optimization, Standard Operating Procedures, Data Analysis, Intercultural Competence, Technical Solutions, Food Manufacturing, Lean Six Sigma, Kaizen, Communication Skills, Efficiency Improvement, Regulatory Documentation, Collaboration, Root Cause Analysis, Performance Metrics
Specialization
Candidates should have a Bachelor's degree in a technical field and several years of experience in food manufacturing, including knowledge of FDA/USDA standards. Skills in project management, process optimization, and developing SOPs are essential.
Experience Required
Minimum 5 year(s)
QA Officer Injectable Manufacturing at UCB SA Canada
Braine-l'Alleud, Wallonia, Belgium - Full Time
Skills Needed
Quality Assurance, Injectable Manufacturing, Gmp Compliance, Technology Transfer, Process Validation, Cleaning Validation, Stability Studies, Change Control, Failure Investigation, Deviation Management, Capa Plans, Sop Review, Auditing Support, Aseptic Techniques, Fact Based Decision Making, Interpersonal Skills
Specialization
Candidates must possess a Bachelor's or Master's degree in a relevant scientific discipline and extensive experience in pharmaceutical QA, with injectables experience being highly advantageous. Fluency in both English and French, along with strong decision-making, accountability, discretion, and teamwork skills, are essential for this role.
Experience Required
Minimum 5 year(s)
HR Business Partner - Manufacturing at Americhem
Liberty, North Carolina, United States - Full Time
Skills Needed
Strategic Hr Leadership, Talent Management, Employee Engagement, Organizational Capability, Workforce Planning, Talent Acquisition, Performance Management, Change Management, Interpersonal Skills, Problem Solving, Adaptability, Hr Best Practices, Communication Skills, Safety Culture, Training Programs, Hr Functions
Specialization
A bachelor's degree in HR, Business, or a related field is required, along with 5+ years of progressive HR experience, preferably in manufacturing. Strong leadership and communication skills are essential, along with the ability to manage HR functions across multiple sites.
Experience Required
Minimum 5 year(s)
Woodworking Handyman - Manufacturing at ALLIED PLASTICS LLC
Town of Randall, Wisconsin, United States - Full Time
Skills Needed
Carpentry, Woodworking, Fabrication, Sanding, Cutting, Shaping, Attention To Detail, Motivation To Learn
Specialization
A strong background in carpentry or woodworking is ideal, but entry-level candidates are welcome to apply. A good attitude and willingness to learn are essential for success in this role.
Manufacturing Technician - 2nd Shift at WEG Canada
Minneapolis, Minnesota, United States - Full Time
Skills Needed
Assembly, Lamination, Winding, Testing, Troubleshooting, Safety Standards Adherence, Motor Assembly, Generator Assembly, Drive Assembly, Stator Winding, Rotor Assembly, Ac Rotating Equipment, Dc Rotating Equipment, Skills Matrix Advancement
Specialization
A high school diploma is preferred but not mandatory for this role. Candidates must be capable of performing tasks related to Assembly, Lamination, or Winding, which involves physical activities such as lifting up to 50 lbs and working in various physical positions, including heights or confined spaces.
Manufacturing Technician - 1st Shift at WEG Canada
Minneapolis, Minnesota, United States - Full Time
Skills Needed
Assembly, Lamination, Winding, Motor Assembly, Generator Assembly, Drive Assembly, Stator Winding, Pole Winding, Exciter Winding, Rotor Assembly, Electrical Ac Equipment, Electrical Dc Equipment, Testing, Troubleshooting, Safety Standards Adherence, Skills Matrix Advancement
Specialization
A high school diploma is preferred but not required for this position. Candidates must be capable of performing tasks related to Assembly, Lamination, or Winding, which includes physical requirements such as lifting up to 50 lbs and working in various physical positions.
Production Lead - Food Manufacturing at GLP Transit
Kingsport, Tennessee, United States - Full Time
Skills Needed
Production Coordination, Team Leadership, Quality Assurance, Safety Awareness, Food Safety, Gmp Training, Documentation, Continuous Improvement, Communication, Problem Solving, Training, Supervision, Manufacturing Experience, Ppe Knowledge, Haccp Familiarity, Sqf Familiarity
Specialization
Candidates should have a minimum of 2 years of experience in a manufacturing facility and a high school diploma or equivalent. Familiarity with quality and food safety programs is preferred.
Experience Required
Minimum 2 year(s)
Production Crew Lead - Manufacturing at Balanced Body Inc
Sacramento, California, United States - Full Time
Skills Needed
Leadership, Coaching, Mentoring, Communication, Problem Solving, Time Management, Inventory Management, Safety Compliance, Team Building, Adaptability, Training, Conflict Resolution, Attention To Detail, Initiative, Interpersonal Skills, Decision Making
Specialization
Candidates should have strong communication skills, the ability to prioritize tasks, and a strong attendance record. They must also be able to lift up to 50lbs and maintain a clean work area.
Experience Required
Minimum 2 year(s)
Manufacturing Production Crew Leader at Balanced Body Inc
Sacramento, California, United States - Full Time
Skills Needed
Leadership, Coaching, Mentoring, Communication, Problem Solving, Time Management, Team Building, Inventory Management, Safety Compliance, Adaptability, Training, Conflict Resolution, Attention To Detail, Initiative, Interpersonal Skills, Active Listening
Specialization
Candidates should have strong communication skills, the ability to prioritize tasks, and a strong attendance record. They must also be able to lift up to 50lbs and maintain a clean work area.
Experience Required
Minimum 2 year(s)
Manufacturing Engineering Technician at Q-Lab Corporation
Westlake, Ohio, United States - Full Time
Skills Needed
Electro Mechanical Test Fixture Fabrication, Electro Mechanical Test Fixture Building, Electro Mechanical Test Fixture Wiring, Tooling Design Collaboration, Component Sourcing, Electrical Troubleshooting, Controls Troubleshooting, Machine Troubleshooting, Industrial Wiring Design, Fabrication, Machine Shop Skills, Pcb Soldering, Pcb Assembly, Plc Programming, Laser Welding, Tig Welding
Specialization
Candidates must have an Associate's Degree in Engineering Technology or equivalent work experience, coupled with over 10 years in electrical and/or mechanical device manufacturing, including expertise in industrial wiring methods and design. Proficiency in basic fabrication, machine shop skills, and Microsoft Office is also required.
Experience Required
Minimum 10 year(s)
Engineering Manager - Manufacturing at Turner Townsend
Sheffield, England, United Kingdom - Full Time
Skills Needed
Design Management, Project Management, Collaboration, Problem Solving, Building Information Modelling, Construction Knowledge, Communication Skills, People Management, Time Management, Cad, Autocad, Revit, Customer Satisfaction, Integrated Design Delivery, Engineering Discipline, Multi Disciplinary Teams
Specialization
Candidates should have a minimum of 5 years of design and management experience, preferably in buildings fit-out, defence industry, and machine integration. A degree or equivalent in an engineering discipline is required, along with strong knowledge of construction methods and design solutions.
Experience Required
Minimum 5 year(s)
Manufacturing Engineer - Electronics at Paxton Access
Brighton, England, United Kingdom - Full Time
Skills Needed
Manufacturing Engineering, Electro Mechanical Production, New Product Introduction, Design For Manufacturability, Lean Manufacturing, Cost Reduction, Quality Improvement, Process Optimization, Total Productive Maintenance, Collaboration, Mentoring, Decision Making, Production Cost Calculation, Manufacturing Processes, Quality Standards, Engineering Support
Specialization
Experience in a similar Engineering role within Electro-mechanical production is required. Familiarity with manufacturing equipment, maintenance protocols, and processes including New Product Introduction and Design for Manufacturability is also necessary.
Experience Required
Minimum 2 year(s)
Electronics Manufacturing Supervisor at Arrow International, Inc.
Brooklyn, Ohio, United States - Full Time
Skills Needed
Electronics Assembly, Leadership, Quality Control, Continuous Improvement, Production Flow, Coaching, Mentoring, Inventory Control, Safety Standards, Teamwork, Communication, Documentation, Technical Understanding, Problem Solving, Organizational Skills, Performance Management
Specialization
Candidates should have over 5 years of experience supervising in an electronics or electro-mechanical assembly environment and possess a strong understanding of production flow and assembly processes. Leadership experience in coaching and developing associates is essential, along with a preferred degree in a related technical field.
Experience Required
Minimum 5 year(s)
Electrical Engineer (Manufacturing) at Revere Copper Products, Inc
City of Rome, New York, United States - Full Time
Skills Needed
Electrical Engineering, Project Management, Power Distribution, Preventative Maintenance, Troubleshooting, Plc Programming, Hmi Programming, Digital Drives, Electrical Code, Union Environment, Heavy Industrial Experience, Equipment Modifications, Construction Supervision, Plant Infrastructure, High Voltage Systems, Operational Efficiency
Specialization
Candidates should have 7-10 years of experience as an Electrical Engineer with knowledge in power distribution design and equipment maintenance. Familiarity with PLCs, HMI, and programming skills are essential.
Experience Required
Minimum 5 year(s)
External Manufacturing NPI Engineer at onsemi
Zhubei, Sichuan, China - Full Time
Skills Needed
Manufacturing, Engineering, Npi, Automotive, Industrial, Power Technologies, Sensing Technologies, Climate Change, Sustainable Energy, Factory Automation, Vehicle Electrification, Advanced Safety, Research, Design, Innovation, Problem Solving
Specialization
Candidates should have experience in manufacturing engineering, particularly in new product introduction (NPI). A background in automotive or industrial markets is preferred, along with skills in problem-solving and innovation.
Experience Required
Minimum 2 year(s)
Manager of Manufacturing Operations at Image Associates Inc.
Oklahoma City, Oklahoma, United States - Full Time
Skills Needed
Manufacturing Operations, Operations Improvement, Leadership, Employee Development, Process Ownership, Regulatory Compliance, Change Management, Process Improvement, Optimization, Team Building, Performance Management, Quality Assurance, Technical Problem Solving, Union Relations, Strategic Goals Alignment, Resource Management
Specialization
A Bachelor’s degree in Engineering or Manufacturing is required along with over 7 years of manufacturing experience, including 5 years in operations leadership. Experience in change management and process improvement is essential.
Experience Required
Minimum 10 year(s)
Industrial Manufacturing Electrician at Ethox Chemicals, LLC
Greenville, South Carolina, United States - Full Time
Skills Needed
Electrical Maintenance, Repairs, Installations, Conduit Work, Motor Controls, High Voltage Systems, Electrical Schematics, Blueprints, Troubleshooting, Preventive Maintenance, Hazmat Operations, Communication Skills, Attention To Detail, Technical Skills, Team Leadership, Maintenance Software
Specialization
Candidates should have a high school diploma or equivalent, with a preference for an associate degree or electrical certification. A minimum of 10 years of industrial electrical maintenance experience is required, along with proficiency in conduit installation and troubleshooting.
Experience Required
Minimum 10 year(s)
Loading...