Electrical Engineer Jobs, Openings, Vacancies in Canada

Principal Flight Control Systems Engineer at AIRO Group Holdings, Inc.

Montreal, Quebec, Canada - Full Time

Skills Needed
Fly By Wire Control Laws, Matlab, Simulink, Control Allocation Algorithms, Hardware In The Loop (Hil), Software In The Loop (Sil), Embedded Autocoding, Real Time Operating Systems (Rtos), Flight Mechanics, Multi Variable Dynamic Systems, Fdir Logic, Flight Envelope Protection, Deterministic Software, System Safety, French Language Proficiency

Specialization
Requires a degree in Aerospace, Mechanical, Electrical, or Computer Engineering with a proven background in fly-by-wire laws and multi-rotor thrust vectoring. Must be proficient in MATLAB/Simulink and experienced with embedded autocoding and safety-critical system workflows.

Experience Required
Minimum 10 year(s)

Engineer III, Instrumentation and Controls at Co-op

Regina, Saskatchewan, Canada - Full Time

Skills Needed
Instrumentation And Controls Engineering, Process Control Systems, Safety Instrumented Systems (Sis), Industrial Automation, P&Id Development, Loop Diagrams, Functional Safety, Fat/Sat Testing, Hazop, Sil Assessments, Field Engineering, Project Management

Specialization
Requires a Bachelor's degree in engineering and a P.Eng. designation with at least 4 years of progressive experience in industrial or major capital projects. Expertise in process control, industry codes (ASME, API), and experience in carbon capture or oil and gas is preferred.

Experience Required
Minimum 2 year(s)

Aircraft Maintenance Engineer, Apprentice at Forest Protection Limited

Fredericton, New Brunswick, Canada - Full Time

Skills Needed
Aircraft Maintenance, Inspection, Repair, Servicing, Logbook Certification, Computer Literacy, English Communication, Safety Compliance, Environmental Management, Technical Documentation

Specialization
Candidates must have basic approved training from Transport Canada and be legally permitted to work in Canada's Federal Aviation sector. Additional requirements include a valid driver's license, passport, and the ability to lift 50 lbs.

Engineering Technologist (IBEW) #2026-111 at Alectra Utilities

Guelph, Ontario, Canada - Full Time

Skills Needed
Voltage Regulation, Fault Calculations, Protective Device Coordination, Load Flow Analysis, Distribution System Optimization, Load Forecasting, Electrical Design, Cost Estimation, Bill Of Materials Preparation, Field Surveying, Contract Inspection, Project Coordination

Specialization
Requires completion of a 3-year Engineering Technology program (Electrical or Civil preferred) and eligibility for OACETT registration. A minimum of 5 years of related experience and a valid Class G driver's license are required.

Experience Required
Minimum 5 year(s)

Senior Electronic Warfare Systems Engineer at 49North

Ottawa, Ontario, Canada - Full Time

Skills Needed
Electronic Warfare Systems, Systems Engineering, Rf Interference Modeling, Requirements Management, System Integration, Verification And Validation, Antenna Technology, Rf Signal Propagation, Radar And Missile Systems, Sigint Sensors, Doors, Confluence, Jira, Cameo, Agile Methodology, Technical Documentation

Specialization
Candidates must have experience in large electronic systems development or integration, specifically with Electronic Warfare systems. Strong communication skills and the ability to obtain Secret level security clearance and CGP/ITAR assessment are required.

Experience Required
Minimum 5 year(s)

Senior Software Engineer, Firefox Desktop at Mozilla

, , Canada - Full Time

Skills Needed
Systems Level Programming, C++, C, Windows Api, Macos Api, Rust, Operating System Integration, Open Source Contribution, Code Review, Technical Communication

Specialization
Requires 3-5 years of software engineering experience with strong skills in C/C++ and systems-level programming on Windows or macOS. Candidates should be effective communicators capable of working independently in a collaborative, open-source environment.

Experience Required
Minimum 2 year(s)

M365 Platform & Power Environment Engineer at Jobgether

, , Canada - Full Time

Skills Needed
Microsoft 365 Engineering, Power Platform, Sharepoint Online, Microsoft Teams, Exchange Online, Onedrive, Entra Id, Dataverse, Cloud Governance, Powershell, Microsoft Graph Api, Identity Management, Conditional Access Policies, Dlp Rules, Environment Provisioning, Servicenow

Specialization
Requires 4-7 years of experience in M365 engineering and strong hands-on expertise with the Power Platform and Dataverse. Proficiency in identity management, cloud governance, and scripting tools like PowerShell is essential.

Experience Required
Minimum 5 year(s)

Senior Environmental Engineer/Scientist at GHD

Ottawa, Ontario, Canada - Full Time

Skills Needed
Project Management, Environmental Site Assessments, Remediation, Technical Writing, Contractor Management, Soil Sampling, Groundwater Sampling, Vapour Sampling, Contract Administration, Regulatory Compliance, Client Relationship Management, Scheduling

Specialization
Candidates need a Bachelor's degree in Environmental/Civil Engineering or Environmental Science and 10-15 years of experience in the environmental field. Professional designations such as P.Eng, P.Geo, or PMP are considered assets.

Experience Required
Minimum 10 year(s)

Director, Production and Test Engineering at True Anomaly

Quinte West, Ontario, Canada - Full Time

Skills Needed
Production Engineering, Test Engineering, Manufacturing Engineering, Capacity Planning, As9100/Iso9001 Standards, Lean Manufacturing, Environmental Testing, Mrp/Plm/Mes Systems, Root Cause Analysis, Cleanroom Management, Integrated Master Schedule, Automation, Rapid Prototyping, Team Leadership, Mission Assurance, Budgeting And Forecasting

Specialization
Requires a Bachelor's degree in Engineering and over 10 years of experience in spacecraft production and testing. Must have deep knowledge of AS9100/ISO9001 standards and experience with MRP, PLM, and MES systems.

Experience Required
Minimum 10 year(s)

Senior Water Quality Scientist / Engineer at WSP

Calgary, Alberta, Canada - Full Time

Skills Needed
Water Quality Assessment, Environmental Permitting, Project Management, Field Program Design, Data Analysis, Regulatory Review, Stakeholder Engagement, Mentoring, Budgeting, Environmental Effects Monitoring, Geochemistry, Hydrology

Specialization
Requires a degree in Chemistry, Environmental Science, Engineering, or a related field, with a Master's degree preferred. Candidates must have 10+ years of progressive experience in water quality and environmental assessment within a consulting environment.

Experience Required
Minimum 10 year(s)

Forward Deployed Engineer (Generative AI) at Tiger Analytics Inc

Toronto, Ontario, Canada - Full Time

Skills Needed
N/A

ResponsiveAds Software Engineer, Ad Formats at ResponsiveAds, Inc.

Vancouver, British Columbia, Canada - Full Time

Skills Needed
Full Stack Development, Html5, Css3, Javascript, Ai Agent Workflows, Llm Pipelines, Rest Api, Creative Rendering, Ad Production, Prebid, Dco, Rapid Prototyping, System Architecture, Technical Strategy, Testing, Observability

Specialization
Requires 7+ years of experience building high-scale consumer or ad systems and a proven track record of shipping complex user-facing systems. Must have hands-on experience with AI agents, code generation, or automated creative pipelines.

Experience Required
Minimum 5 year(s)

Sr. Manager, Data Engineering & Analytics at Serve Robotics

Alberta, Alberta, Canada - Full Time

Skills Needed
N/A

Aircraft Maintenance Engineer - Heavy Line at The Talent Team at Perimeter Aviation

Winnipeg, Manitoba, Canada - Full Time

Skills Needed
Aircraft Maintenance, Heavy Mechanical Maintenance, Aircraft Inspection, Aircraft Towing, Hand Tools, Verbal Communication, Written Communication, Teamwork, Independent Work, Safety Compliance

Specialization
Requires a high school diploma and a Transport Canada AME Licence with M2, E, and S ratings. Previous experience in a line or heavy maintenance environment is mandatory.

Experience Required
Minimum 2 year(s)

Aircraft Maintenance Engineer - Heavy Line at The Talent Team at Perimeter Aviation

Winnipeg, Manitoba, Canada - Full Time

Specialization
Requires a high school diploma and a Transport Canada AME Licence with M2, E, and S ratings. Previous experience in a line or heavy maintenance environment is mandatory.

Experience Required
Minimum 2 year(s)

3D IC and ADVANCED PACKAGING CAD ENGINEER at Advanced Micro Devices, Inc

Markham, Ontario, Canada - Full Time

Skills Needed
3d Ic Design, Advanced Packaging, Cad Flow Development, Machine Learning, Large Language Models, Python, Tcl, Perl, Verilog, Rtl, Upf, Synopsys 3dic Compiler, Cadence Tools, Linux/Unix, Cloud Compute, Digital Design

Specialization
Requires a degree in Computer or Electrical Engineering with strong experience in 3D-IC design and EDA toolchains from Synopsys and Cadence. Proficiency in scripting languages like Python and TCL, along with experience applying AI/ML to hardware design, is essential.

Experience Required
Minimum 5 year(s)

Senior Manager, Manufacturing Engineering at ENTEGRIS INC

ontario, Ontario, Canada - Full Time

Skills Needed
N/A

Engineering IMIT Business Solutions Analyst at L3Harris MariPro

Mirabel, Nova Scotia, Canada - Full Time

Skills Needed
Business Analysis, Requirements Gathering, Plm, Erp, Bpmn, Project Management, Organizational Change Management, System Modeling, Process Mapping, Technical Writing, Stakeholder Management, Trade Study Analysis, Enovia 3dexperience, Sap, Ramco, Aerospace Engineering

Specialization
Requires a degree in Engineering, Computer Science, or a related field with practical experience in translating business needs into functional specifications. Proficiency with PLM/ERP systems and knowledge of Aerospace & Defense business standards is highly desired.

Experience Required
Minimum 5 year(s)

Regional Industrial Engineer - East Canada at Sun Gro Horticulture Canada

Inkerman Parish, New Brunswick, Canada - Full Time

Skills Needed
Change Management, Project Management, Autocad, Solidworks, Lean Manufacturing, Plc Automation, Electrical Systems, Process Improvement, Capital Project Management, 2d/3d Modeling, Statistical Analysis, Cmms Implementation, Layout Design, Cost Analysis, Bilingual English/French, Cross Functional Collaboration

Specialization
Requires a degree in Mechanical, Industrial, or Manufacturing Engineering with over 7 years of experience in high-mix manufacturing environments. Must be bilingual in English and French and willing to travel up to 75% of the time.

Experience Required
Minimum 5 year(s)

Staff Full-Stack Engineer .NET, React & AI at Finlink Group

Ontario, Ontario, Canada - Full Time

Skills Needed
N/A

Principal Flight Control Systems Engineer at AIRO Group Holdings, Inc.

Montreal, Quebec, Canada -

Full Time

Start Date

Immediate

Expiry Date

16 Oct, 26

Salary

155000.0

Posted On

18 Jul, 26

Experience

10 year(s) or above

Remote Job

Yes

Telecommute

Yes

Sponsor Visa

Skills

Fly-By-Wire Control Laws, MATLAB, Simulink, Control Allocation Algorithms, Hardware-In-The-Loop (HIL), Software-In-The-Loop (SIL), Embedded Autocoding, Real-Time Operating Systems (RTOS), Flight Mechanics, Multi-Variable Dynamic Systems, FDIR Logic, Flight Envelope Protection, Deterministic Software, System Safety, French Language Proficiency

Industry

Defense and Space Manufacturing

Description

Position Overview: As a Level 4 Flight Control Systems Engineer, you are responsible for designing and simulating specific flight-critical control allocation and transition logic routines for the hybrid-electric slowed-rotor architecture. In this advanced engineering role, you will own distinct portions of the fly-by-wire control loop architecture, bridging the gap between abstract aerodynamic design and deterministic embedded implementation on the vehicle's dual Flight Control Computers. You will work closely with multi-disciplinary propulsion, avionics, and safety teams to develop, mature, and validate the flight control software from concept modeling through integrated hardware-in-the-loop validation and prototype flight clearing. Key Responsibilities: · Design and refine control laws governing the aerodynamic transition from rotor-borne vertical lift to wing-borne forward cruise flight. · Develop multi-variable control allocation algorithms that blend main rotor collective and cyclic pitch commands with differential wing-mounted propulsor thrust and fixed aerodynamic surfaces like flaperons, elevators, and rudders. · Integrate parallel hybrid energy-constraint logic into core Flight Control Computer algorithms to dynamically balance transient battery discharge power margins against continuous internal combustion engine generator output. · Implement robust flight envelope protection logic to enforce structural and aerodynamic safety boundaries, including pitch, bank, airspeed, rotor RPM, and load factor limits. · Configure deterministic software state machines for cross-channel monitoring, sensor voting, and automatic failover handling across dual Flight Control Computers. · Execute and document extensive Software-in-the-Loop (SIL) and Hardware-in-the-Loop (HIL) simulations to validate control loop robustness, Fault Detection, Isolation, and Recovery (FDIR) logic, and emergency landing autonomy. Qualifications: · Proven background in aircraft fly-by-wire flight control laws, multi-rotor thrust vectoring, or helicopter/tiltrotor flight mechanics. · Demonstrated history of utilizing MATLAB and Simulink for the modeling, simulation, and analysis of multi-variable dynamic systems. · Direct experience generated using embedded autocoding pipelines to deploy real-time software onto target flight hardware. · Practical exposure to hardware-in-the-loop (HIL) testing facilities, real-time operating systems (RTOS), and safety-critical system development workflows. · Strong collaborative and communications baseline necessary to coordinate complex multi-system interfaces across propulsion, electrical, and systems safety structures. Education: · Bachelor’s or Master’s degree in Aerospace Engineering, Mechanical Engineering, Electrical Engineering, Computer Engineering, or a related technical discipline. Physical and Mental Requirements: · Standing and sitting for extended periods of time, · Lifting up to 25 pounds in a safe and prudent manner, · Ability to work and communicate well with other employees and management, customers, visitors, vendors. · Ability to perform work utilizing manual dexterity of the hands, · Ability to push, pull, bend, stoop, reach above and below shoulders, and full use of upper extremities, · Ability to easily move through an approximately 25,000 square foot warehouse building, · Ability to read, write, and understand French, · Correctable vision and hearing. This job description is not intended to be all-inclusive, and the employee may also be asked to perform other reasonably related job duties as assigned by their immediate supervisor as required. All employees may be required to perform duties outside of their normal responsibilities from time to time as needed. The AIRO Group is an Equal Opportunity Employer. Description du poste Aperçu de l'entreprise : Jaunt Air Mobility Canada est un pionnier de l'aérospatiale et de la mobilité aérienne dédié à la conception, à la certification et à la fabrication à haut débit de plateformes aéronautiques VTOL propres. Opérant comme un pilier central de la division Mobilité Aérienne Électrique du Groupe AIRO, Jaunt Canada met à profit l'ingénierie aérospatiale de classe mondiale et les chaînes d'approvisionnement localisées pour offrir des solutions de transport de premier plan dans l'industrie. Notre programme phare actuel, le Jaunt JC250, est une plateforme de cargaison VTOL hybride-électrique avancée, à rotor ralenti, conçue pour une logistique Beyond Visual Line-of-Sight (BVLOS) à haute endurance et grande fiabilité. Avec son siège social avec une forte présence professionnelle en ingénierie et opérationnelle à Montréal et Mirabel, au Québec, Jaunt Canada fait le pont entre la conception aérospatiale abstraite et la mise en œuvre certifiée et intégrée dans le monde réel. Aperçu du poste : En tant qu'ingénieur des systèmes de contrôle de vol de niveau 4, vous êtes responsable de concevoir et de simuler des routines spécifiques d'allocation de contrôle critique en vol et de logique de transition pour l'architecture hybride-électrique à rotor ralenti. Dans ce rôle d'ingénieur avancé, vous posséderez des parties distinctes de l'architecture de boucle de contrôle fly-by-wire, faisant le lien entre la conception aérodynamique abstraite et l'implémentation embarquée déterministe sur les deux ordinateurs de contrôle de vol du véhicule. Vous travaillerez en étroite collaboration avec des équipes multidisciplinaires de propulsion, d'avionique et de sécurité pour développer, mûrir et valider le logiciel de contrôle de vol, allant de la modélisation conceptuelle à la validation intégrée du matériel dans la boucle et à l'autorisation de vol des prototypes. Responsabilités clés : · Concevoir et affiner les lois de contrôle régissant la transition aérodynamique de la portance verticale sur rotor au vol de croisière avant sur aile. · Développer des algorithmes d'allocation de contrôle multivariables qui combinent les commandes collectives du rotor principal et les commandes de pas cyclique avec la poussée différentielle montée sur les ailes, ainsi que des surfaces aérodynamiques fixes comme les flaperons, les gouvernales de profondeur et les gouvernails. · Intégrer la logique hybride parallèle à contraintes d'énergie dans les algorithmes centraux de l'ordinateur de contrôle de vol afin d'équilibrer dynamiquement les marges de puissance de décharge transitoire de la batterie avec la sortie continue du générateur moteur à combustion interne. · Mettre en œuvre une logique robuste de protection de l'enveloppe de vol pour faire respecter les limites de sécurité structurelle et aérodynamique, y compris les limites de tangage, d'inclinaison, de vitesse, de régime du rotor et de facteur de charge. · Configurez des machines à états logicielles déterministes pour la surveillance multicanal, le vote par capteurs et la gestion automatique du basculement entre deux ordinateurs de contrôle de vol. · Exécuter et documenter des simulations étendues Software-in-the-Loop (SIL) et Hardware-in-the-Loop (HIL) afin de valider la robustesse de la boucle de contrôle, la logique de détection, d'isolation et de récupération (FDIR) et l'autonomie d'atterrissage d'urgence. Qualifications : · Expérience éprouvée en lois de contrôle de vol fly-by-wire d'aéronefs, en vectorisation de poussée multi-rotors ou en mécanique de vol hélicoptère/tiltrotor. · Historique démontré de l'utilisation de MATLAB et Simulink pour la modélisation, la simulation et l'analyse de systèmes dynamiques multivariables. · Expérience directe générée à l'aide de pipelines d'autocodage embarqués pour déployer des logiciels en temps réel sur le matériel de vol cible. · Exposition pratique aux installations de test matériel-in-the-loop (HIL), aux systèmes d'exploitation en temps réel (RTOS) et aux flux de travail de développement de systèmes critiques pour la sécurité. · Une base de référence collaborative et de communication solide nécessaire pour coordonner des interfaces complexes multi-systèmes entre les structures de propulsion, d'électricité et de sécurité des systèmes. Éducation : · Baccalauréat ou maîtrise en génie aérospatial, génie mécanique, génie électrique, génie informatique ou discipline technique connexe. Exigences physiques et mentales : · Debout et assis pendant de longues périodes, · En soulevant jusqu'à 25 livres de façon sécuritaire et prudente, · Capacité à bien travailler et communiquer avec les autres employés et la direction, les clients, les visiteurs, les fournisseurs. · Capacité à effectuer un travail en utilisant la dextérité manuelle des mains, · Capacité à pousser, tirer, plier, se pencher, atteindre au-dessus et en dessous des épaules, et utilisation complète des membres supérieurs, · Capacité à se déplacer facilement à travers un entrepôt d'environ 25 000 pieds carrés, · Capacité à lire, écrire et comprendre le français, · Vision et ouïe corrigeables. Cette description de poste n'a pas pour but d'être exhaustive, et l'employé peut aussi être sollicité pour accomplir d'autres tâches raisonnablement connexes, selon les exigences de son superviseur immédiat. Tous les employés peuvent être tenus d'accomplir des tâches hors de leurs responsabilités habituelles de temps à autre, selon les besoins. Le groupe AIRO est un employeur offrant l'égalité des chances.

Responsibilities

Design and simulate flight-critical control allocation and transition logic for a hybrid-electric slowed-rotor aircraft. Develop and validate fly-by-wire control loop architectures from concept modeling through hardware-in-the-loop validation.

Principal Flight Control Systems Engineer at AIRO Group Holdings, Inc.

Montreal, Quebec, Canada - Full Time

Experience Required
Minimum 10 year(s)

Engineer III, Instrumentation and Controls at Co-op

Regina, Saskatchewan, Canada - Full Time

Experience Required
Minimum 2 year(s)

Aircraft Maintenance Engineer, Apprentice at Forest Protection Limited

Fredericton, New Brunswick, Canada - Full Time

Engineering Technologist (IBEW) #2026-111 at Alectra Utilities

Guelph, Ontario, Canada - Full Time

Experience Required
Minimum 5 year(s)

Senior Electronic Warfare Systems Engineer at 49North

Ottawa, Ontario, Canada - Full Time

Experience Required
Minimum 5 year(s)

Senior Software Engineer, Firefox Desktop at Mozilla

, , Canada - Full Time

Skills Needed
Systems Level Programming, C++, C, Windows Api, Macos Api, Rust, Operating System Integration, Open Source Contribution, Code Review, Technical Communication

Experience Required
Minimum 2 year(s)

M365 Platform & Power Environment Engineer at Jobgether

, , Canada - Full Time

Experience Required
Minimum 5 year(s)

Senior Environmental Engineer/Scientist at GHD

Ottawa, Ontario, Canada - Full Time

Experience Required
Minimum 10 year(s)

Director, Production and Test Engineering at True Anomaly

Quinte West, Ontario, Canada - Full Time

Experience Required
Minimum 10 year(s)

Senior Water Quality Scientist / Engineer at WSP

Calgary, Alberta, Canada - Full Time

Experience Required
Minimum 10 year(s)

Forward Deployed Engineer (Generative AI) at Tiger Analytics Inc

Toronto, Ontario, Canada - Full Time

Skills Needed
N/A

ResponsiveAds Software Engineer, Ad Formats at ResponsiveAds, Inc.

Vancouver, British Columbia, Canada - Full Time

Experience Required
Minimum 5 year(s)

Sr. Manager, Data Engineering & Analytics at Serve Robotics

Alberta, Alberta, Canada - Full Time

Skills Needed
N/A

Aircraft Maintenance Engineer - Heavy Line at The Talent Team at Perimeter Aviation

Winnipeg, Manitoba, Canada - Full Time

Specialization
Requires a high school diploma and a Transport Canada AME Licence with M2, E, and S ratings. Previous experience in a line or heavy maintenance environment is mandatory.

Experience Required
Minimum 2 year(s)

Aircraft Maintenance Engineer - Heavy Line at The Talent Team at Perimeter Aviation

Winnipeg, Manitoba, Canada - Full Time

Specialization
Requires a high school diploma and a Transport Canada AME Licence with M2, E, and S ratings. Previous experience in a line or heavy maintenance environment is mandatory.

Experience Required
Minimum 2 year(s)

3D IC and ADVANCED PACKAGING CAD ENGINEER at Advanced Micro Devices, Inc

Markham, Ontario, Canada - Full Time

Experience Required
Minimum 5 year(s)

Senior Manager, Manufacturing Engineering at ENTEGRIS INC

ontario, Ontario, Canada - Full Time

Skills Needed
N/A

Engineering IMIT Business Solutions Analyst at L3Harris MariPro

Mirabel, Nova Scotia, Canada - Full Time

Experience Required
Minimum 5 year(s)

Regional Industrial Engineer - East Canada at Sun Gro Horticulture Canada

Inkerman Parish, New Brunswick, Canada - Full Time

Experience Required
Minimum 5 year(s)

Staff Full-Stack Engineer .NET, React & AI at Finlink Group

Ontario, Ontario, Canada - Full Time

Skills Needed
N/A

Electrical Engineer Jobs in Canada