Y-Axis Jobs Logo
Send us feedback
telephone  +91 7670 800 001
Log in Sign up Try Premium

Microsoft Corporation Jobs overseas

About 9389 results in (2) seconds Clear Filters

Jobs Search

About 9389 results in (2) seconds
Production Coordinator at STATES MANUFACTURING CORPORATION
Dayton, Minnesota, United States - Full Time
Skills Needed
Job Packet Preparation, Erp Data Entry, Job Maintenance, Documentation Coordination, Erp Setup, Job Record Maintenance, Production Scheduling Alignment, Bom Verification, Drawing Verification, Material Issuance, Epicor Erp, Problem Solving, Attention To Detail, Organizational Skills
Specialization
Candidates need at least two years of experience in manufacturing coordination, production administration, or related administrative work, along with proficiency in Microsoft Office products. Strong organizational, problem-solving skills, and the ability to manage multiple priorities independently are essential.
Experience Required
Minimum 2 year(s)
Garden Specialist at Knightsbridge Capital Corporation
Greenough, Montana, United States - Full Time
Skills Needed
Greenhouse Operations, Garden Bed Maintenance, Record Keeping, Harvesting, Produce Trimming, Pest Treatment, Disease Treatment, Tool Sanitization, Seed Starting, Transplanting, Seed Collection, Plant Propagation, Hand Pollination, Soil Amendment, Pest Identification, Microsoft Excel
Specialization
Candidates must possess a high school diploma, GED, or vocational training, along with previous experience in landscaping or horticulture. A valid State Driver's License is also required for this role.
Lead Test Technician- Maple Grove at STATES MANUFACTURING CORPORATION
Dayton, Minnesota, United States - Full Time
Skills Needed
Electrical Testing, Troubleshooting, Leadership, Mentorship, Factory Acceptance Testing, Factory Witness Testing, Schematic Interpretation, Nema Standards, Low Voltage Applications, Medium Voltage Applications, Control Systems, Documentation, Microsoft Office, Safety Procedures, Ppe Compliance
Specialization
Candidates must have a high school diploma or equivalent and at least 5 years of experience in electrical testing, switchgear, or panel building. Proficiency in reading electrical schematics, advanced troubleshooting, and strong communication skills are required.
Experience Required
Minimum 5 year(s)
Electrical Engineer Manager at Precision Optics Corporation Inc
Littleton, Massachusetts, United States - Full Time
Skills Needed
Electrical Engineering, Fpga Development, Cmos Sensor Integration, Pcba Design, Altium Designer, C, Python, Mixed Signal System Debugging, Image Signal Processing, Team Leadership, System Architecture, Dfm, High Speed Layout, Technical Project Management, Regulatory Compliance, Hardware Characterization
Specialization
Requires a Bachelor's or Master's degree in Electrical Engineering with 4 to 8+ years of experience, including at least 2 years in a leadership role. Must have demonstrated expertise in real-time video systems, PCBA design, and FPGA-based image processing within regulated environments.
Experience Required
Minimum 10 year(s)
Fabrication Operator at STATES MANUFACTURING CORPORATION
Champlin, Minnesota, United States - Full Time
Skills Needed
Machine Operation, Machine Setup, Press Brake Operation, Laser Operation, Waterjet Operation, Punch Press Operation, Shear Operation, Forklift Operation, Blueprint Reading, Schematic Reading, Calipers, Micrometers, Quality Control, Equipment Maintenance, Production Cycle Management
Specialization
Candidates must have 0-3 years of experience in machine operation and setup, along with the ability to read blueprints and use precision measurement tools. The role requires physical stamina for standing, walking, and lifting up to 75 lbs, as well as forklift certification or the ability to obtain it.
Master Scheduler at STATES MANUFACTURING CORPORATION
Dayton, Minnesota, United States - Full Time
Skills Needed
Production Scheduling, Master Production Schedule, Engineer To Order, Capacity Planning, Supply Chain Alignment, Resource Optimization, Lead Time Reduction, Throughput Efficiency, Erp/Mrp Systems, Bom Accuracy, Routing Accuracy, Process Improvement, Analytical Skills, Problem Solving, Cross Functional Communication, Project Management
Specialization
Candidates must possess a Bachelor's degree in a relevant field like Industrial Engineering or Supply Chain Management, along with a minimum of 5 years of experience in production planning or scheduling, preferably within an Engineer-to-Order setting. Strong proficiency in ERP/MRP systems, capacity planning, and cross-functional coordination is essential.
Experience Required
Minimum 5 year(s)
Buyer at STATES MANUFACTURING CORPORATION
Dayton, Minnesota, United States - Full Time
Skills Needed
Purchase Order Management, Inventory Management, Supplier Relationship Management, Demand Forecasting, Erp Systems, Analytical Skills, Communication Skills, Negotiation Skills, Organizational Skills, Cost Containment, Lead Time Reduction, Data Analysis
Specialization
Candidates must possess a Bachelor's degree in business or 3 to 4 years of experience in sourcing, procurement, or purchasing, along with proficient knowledge of Microsoft Office, especially Excel. Essential attributes include strong analytical skills, attention to detail, professional business acumen, negotiation skills, and the ability to work independently.
Experience Required
Minimum 2 year(s)
Customer Experience Representative - Dunedin at Accident Compensation Corporation
Dunedin, Otago, New Zealand - Full Time
Skills Needed
Customer Focus, Personal Resilience, Verbal Communication, Written Communication, Adaptability, Working Under Pressure, Structured Environment Adherence, Inbound Call Handling, Email Support, Live Chat Support
Specialization
The ideal candidate must be customer-focused, possess personal resilience to manage challenging conversations, and have clear verbal and written communication skills. Adaptability and comfort working under pressure in a fast-paced, structured environment are also essential qualities.
Quality Inspector at STATES MANUFACTURING CORPORATION
Dayton, Minnesota, United States - Full Time
Skills Needed
Quality Inspection, Electrical Testing, Mechanical Inspection, Calibration, Root Cause Analysis, Iso 9001, Ul Standards, Schematic Reading, Technical Documentation, Lean Manufacturing, Multimeter, Hi Pot Testing, Calipers, Micrometers, Torque Wrenches, Erp Systems
Specialization
Candidates must have a high school diploma or GED and at least 2 years of manufacturing experience, preferably in electrical equipment production. Proficiency in reading electrical schematics and experience with quality tools and standards like UL and ISO 9001 are required.
Experience Required
Minimum 2 year(s)
Maintenance Machine Repair at Elyria Manufacturing Corporation
, Indiana, United States - Full Time
Skills Needed
Electrical Systems, Hydraulic Systems, Mechanical Systems, Pneumatic Systems, Preventive Maintenance, Troubleshooting, Diagnostics, Cnc Machines, Plc, Ladder Logic, Welding, Fabrication, Forklift Operation, Scissor Lift Operation, 5s Techniques
Specialization
Candidates should ideally possess 5 to 7 years of maintenance/machine repair experience in a manufacturing environment utilizing electro-mechanical equipment, along with a high school diploma or GED. Required knowledge includes CNC controls, hydraulics, pneumatics, PLCs, electrical systems, and the ability to troubleshoot using ladder logic and electrical diagrams.
Experience Required
Minimum 5 year(s)
Switchgear Assembler at STATES MANUFACTURING CORPORATION
Champlin, Minnesota, United States - Full Time
Skills Needed
Quality Control, Communication Skills, Hand Eye Coordination, Blueprint Reading, Technical Knowledge, Tape Measurer Usage, Power Hand Tools, Precision Measurement, Schematic Reading, Manual Dexterity
Specialization
Requires a high school diploma and the ability to read blueprints and use power tools. Candidates must possess strong manual dexterity and the ability to follow established assembly procedures.
After Sales Service Manager at Telstar Manufacturing Corporation
Derby, England, United Kingdom - Full Time
Skills Needed
Service Sales Management, Capital Equipment, Packaging Industry, Sap, Crm Systems, Commercial Drive, Entrepreneurial Mindset, Negotiation Skills, Maintenance Strategies, Operational Efficiencies, Time Management, Relationship Building, Strategic Planning, Data Driven Analysis, Forecasting
Specialization
Candidates must have at least 5 years of experience in service sales management within capital equipment or service operations. A degree in Engineering, Technical, or Business fields is required, along with proficiency in SAP and CRM systems.
Experience Required
Minimum 5 year(s)
Actuarial Analyst at AUTOMOBILE PROTECTION CORPORATION
Nocatee, Florida, United States - Full Time
Skills Needed
Pricing, Liability Estimates, Financial Projections, Data Compilation, Loss Experience Analysis, Rate Level Determination, Underwriting Request Preparation, Rate Card Creation, Exception Request Review, Profit Share Forecasts, Reserve Calculation, Testing Lead, Advanced Excel, Ms Office Suite, Sql, Powerbi
Specialization
Candidates must possess a Bachelor of Science degree in Actuarial Science, Mathematics, Statistics, or a related field, along with a minimum of two years of prior work experience in actuarial or risk management functions, preferably with vehicle service contracts. Proficiency in Advanced Excel and the MS Office suite is required, with knowledge of SQL and PowerBI being preferred.
Experience Required
Minimum 2 year(s)
Design Quality Assurance Engineer at Precision Optics Corporation Inc
Littleton, Massachusetts, United States - Full Time
Skills Needed
Quality Engineering, Design Control, Regulatory Compliance, Risk Management, Verification And Validation, Design Transfer, Training, Coaching, Documentation, Auditing, Root Cause Analysis, Capa, Microsoft Office 365, Electronic Qms, Plm, Erp
Specialization
Candidates should have over 5 years of quality engineering experience in medical device design and development, with familiarity in FDA and ISO standards. A bachelor's degree in engineering or a related field is required, along with relevant certifications preferred.
Experience Required
Minimum 5 year(s)
Thermal/Environmental Coating Engineer - Onsite at RAYTHEON TECHNOLOGIES CORPORATION
East Hartford, Connecticut, United States - Full Time
Skills Needed
Thermal Barrier Coatings, Environmental Barrier Coatings, Coating Development, Coating Characterization, Cvd, Thermal Spraying, Slurry Application, Plating, Metallography, Computational Modeling, Thermo Calc, Factsage, Process Optimization, Data Analysis, Lean, Six Sigma
Specialization
A Bachelor's degree in Material Science, Chemical Engineering, Applied Physics, or a related technical field with 5+ years of engineering experience (or 3+ years with an advanced degree) is required, along with a fundamental understanding of aerospace coating application methods. This role requires the candidate to be a U.S. Person due to government program requirements.
Experience Required
Minimum 5 year(s)
Milling - Machinist I-III - 2nd Shift at Daniels Manufacturing Corporation
Orlando, Florida, United States - Full Time
Skills Needed
Machine Setup, Programming, Troubleshooting, Tool Selection, Tolerance Control, Cutter Compensating, Blueprint Reading, Communication Skills, Lathes, Grinding, Turning, Multi Axis Machines, G Codes, M Codes
Specialization
Candidates must possess a minimum of one to two years of machining experience and demonstrate knowledge of Lathes, Grinding, Turning, and Multi Axis machines. Required qualifications include the ability to read blueprints, understand G & M codes, and possess strong communication skills.
NDT Inspector Level III (1st Shift)(Onsite) at RAYTHEON TECHNOLOGIES CORPORATION
Bridgeport, West Virginia, United States - Full Time
Skills Needed
Ndt Inspector Level Iii, Magnetic Particle Inspection (Mpi), Fluorescent Penetrant Inspection (Fpi), Technical Oversight, Procedure Development, Personnel Certification, Inspection Auditing, Turbine Engine Components, Aerospace Standards, Regulatory Compliance, Root Cause Analysis, Corrective Actions, Asnt Certification, Ut, Rt, Et
Specialization
Candidates must possess a High School Diploma or GED equivalent along with a minimum of 5+ years of NDT experience, including significant hands-on work in aerospace or manufacturing, and current or previous Level III certification in MPI and FPI under ASNT. U.S. citizenship is required due to program/contract access restrictions.
Experience Required
Minimum 5 year(s)
RN Case Manager, 7W, 40 Hours (Days / 4x10 Hour Shifts / Every 6th Weekend) at Boston Medical Center Corporation
Boston, Massachusetts, United States - Full Time
Skills Needed
Case Management, Utilization Review, Discharge Planning, Managed Care, Clinical Assessment, Medical Terminology, Care Coordination, Patient Advocacy, Data Management, Problem Solving, Communication, Negotiation, Icd 9 Coding, Cpt Coding, Interpersonal Skills
Specialization
Candidates must hold a current Massachusetts Registered Nurse license and have 3-5 years of clinical experience. A minimum of 1-3 years of recent acute inpatient Care Management experience is required, along with an ASN or BSN degree.
Experience Required
Minimum 2 year(s)
Front Desk Agent - Airport at Knightsbridge Capital Corporation
Greenough, Montana, United States - Full Time
Skills Needed
Guest Greeting, Professionalism, Hospitality, Communication, Reservation Management, Service Recovery, Transportation Logistics, Data Privacy, Confidentiality, Operational Excellence, Customer Service, Microsoft Office, Multi Tasking, Driving, Auditing
Specialization
Candidates need a minimum of two years of hospitality experience, preferably in a Front Office role, and must possess a valid State Driver's License for transportation duties. Required technical skills include proficiency with Microsoft Office, strong keyboard skills, and the ability to multitask efficiently in a fast-paced, high-demand environment.
Experience Required
Minimum 2 year(s)
Machinist Team Member - 2nd shift at RAYTHEON TECHNOLOGIES CORPORATION
Columbus, Georgia, United States - Full Time
Skills Needed
Machine Operation, Process Equipment Operation, Minor Maintenance, Tooling Setup, Blueprint Reading, Verbal Instruction Following, Written Instruction Following, Basic Shop Mathematics, Measurement Instruments Usage, Team Member Development
Specialization
Candidates must possess a High School Diploma or GED and fulfill the mandatory requirement of U.S. citizenship for program/contract access authorization. Preferred qualifications include 6 months of manufacturing/technical/military experience or completion of a Certified Manufacturing Specialist Program, along with one year of machine operator experience.
Production Coordinator at STATES MANUFACTURING CORPORATION
Dayton, Minnesota, United States -
Full Time

Start Date

Immediate

Expiry Date

09 Jun, 26

Salary

30.0

Posted On

11 Mar, 26

Experience

2 year(s) or above

Remote Job

Yes

Telecommute

Yes

Sponsor Visa

No

Skills

Job Packet Preparation, ERP Data Entry, Job Maintenance, Documentation Coordination, ERP Setup, Job Record Maintenance, Production Scheduling Alignment, BOM Verification, Drawing Verification, Material Issuance, Epicor ERP, Problem Solving, Attention To Detail, Organizational Skills

Industry

electrical;Appliances;and Electronics Manufacturing

Description
Description Job Summary: The Production Coordinator is responsible for preparing production job packets and supporting ERP data entry and job maintenance activities. This role coordinates and prints the documentation required for shop floor job packets, assists with ERP job setup, and helps maintain accurate job records within the ERP system. The Production Coordinator works closely with planning, engineering, programming, and production to support the preparation and release of jobs so they can move efficiently through fabrication and assembly in alignment with production schedules established by the planning team. This is a full-time, hourly position. Typical working hours will be Monday – Friday with hours ranging from 7:00a.m. to 5:00p.m. based on the candidates preferred working hours. ?Overtime may be available. ? Duties and Responsibilities: Job Preparation & Documentation Prepare and organize job packets including drawings, BOMs, travelers, programs, and supporting documentation. Coordinate with production planners to ensure timely release of job packets to the shop floor in alignment with production schedules Review documentation for completeness and verify revision alignment prior to job release. Coordinate with engineering and programming to help confirm the appropriate BOM revisions and drawings are attached to production jobs. Job Maintenance & Data Entry Issue material to jobs within the ERP system as required to support production execution. Verify required materials are properly linked to jobs and escalate discrepancies when identified. Assist with resolving material or job structure issues that may impact production readiness. Maintain job records within Epicor ERP, including: Job documentation attachments Routing and method verification Job status updates Assist with data entry and job maintenance activities to ensure accurate system data supporting production. Other duties assigned by leadership or management groups. Required Skills and Experience: 2+ years of experience in manufacturing coordination, production administration, or administrative work Experience with Epicor is preferred but not required. Working knowledge of Microsoft Office products, including Outlook, Excel, Word, PowerPoint. Ability to work in a team environment to accomplish daily tasks. Strong problem-solving, attention to detail, and organizational skills. Ability to work independently and manage multiple priorities simultaneously. Benefits PTO/ESST Paid holidays $100 individual deductible and $300 family deductible health insurance Paid Weekly Vision and Dental Insurance 401K / Life Insurance / STD
Responsibilities
The Production Coordinator prepares job packets, including necessary documentation like drawings and BOMs, and coordinates their timely release to the shop floor according to production schedules. This role also involves maintaining accurate job records and performing data entry within the Epicor ERP system.
Production Coordinator at STATES MANUFACTURING CORPORATION
Dayton, Minnesota, United States - Full Time
Skills Needed
Job Packet Preparation, Erp Data Entry, Job Maintenance, Documentation Coordination, Erp Setup, Job Record Maintenance, Production Scheduling Alignment, Bom Verification, Drawing Verification, Material Issuance, Epicor Erp, Problem Solving, Attention To Detail, Organizational Skills
Specialization
Candidates need at least two years of experience in manufacturing coordination, production administration, or related administrative work, along with proficiency in Microsoft Office products. Strong organizational, problem-solving skills, and the ability to manage multiple priorities independently are essential.
Experience Required
Minimum 2 year(s)
Garden Specialist at Knightsbridge Capital Corporation
Greenough, Montana, United States - Full Time
Skills Needed
Greenhouse Operations, Garden Bed Maintenance, Record Keeping, Harvesting, Produce Trimming, Pest Treatment, Disease Treatment, Tool Sanitization, Seed Starting, Transplanting, Seed Collection, Plant Propagation, Hand Pollination, Soil Amendment, Pest Identification, Microsoft Excel
Specialization
Candidates must possess a high school diploma, GED, or vocational training, along with previous experience in landscaping or horticulture. A valid State Driver's License is also required for this role.
Lead Test Technician- Maple Grove at STATES MANUFACTURING CORPORATION
Dayton, Minnesota, United States - Full Time
Skills Needed
Electrical Testing, Troubleshooting, Leadership, Mentorship, Factory Acceptance Testing, Factory Witness Testing, Schematic Interpretation, Nema Standards, Low Voltage Applications, Medium Voltage Applications, Control Systems, Documentation, Microsoft Office, Safety Procedures, Ppe Compliance
Specialization
Candidates must have a high school diploma or equivalent and at least 5 years of experience in electrical testing, switchgear, or panel building. Proficiency in reading electrical schematics, advanced troubleshooting, and strong communication skills are required.
Experience Required
Minimum 5 year(s)
Electrical Engineer Manager at Precision Optics Corporation Inc
Littleton, Massachusetts, United States - Full Time
Skills Needed
Electrical Engineering, Fpga Development, Cmos Sensor Integration, Pcba Design, Altium Designer, C, Python, Mixed Signal System Debugging, Image Signal Processing, Team Leadership, System Architecture, Dfm, High Speed Layout, Technical Project Management, Regulatory Compliance, Hardware Characterization
Specialization
Requires a Bachelor's or Master's degree in Electrical Engineering with 4 to 8+ years of experience, including at least 2 years in a leadership role. Must have demonstrated expertise in real-time video systems, PCBA design, and FPGA-based image processing within regulated environments.
Experience Required
Minimum 10 year(s)
Fabrication Operator at STATES MANUFACTURING CORPORATION
Champlin, Minnesota, United States - Full Time
Skills Needed
Machine Operation, Machine Setup, Press Brake Operation, Laser Operation, Waterjet Operation, Punch Press Operation, Shear Operation, Forklift Operation, Blueprint Reading, Schematic Reading, Calipers, Micrometers, Quality Control, Equipment Maintenance, Production Cycle Management
Specialization
Candidates must have 0-3 years of experience in machine operation and setup, along with the ability to read blueprints and use precision measurement tools. The role requires physical stamina for standing, walking, and lifting up to 75 lbs, as well as forklift certification or the ability to obtain it.
Master Scheduler at STATES MANUFACTURING CORPORATION
Dayton, Minnesota, United States - Full Time
Skills Needed
Production Scheduling, Master Production Schedule, Engineer To Order, Capacity Planning, Supply Chain Alignment, Resource Optimization, Lead Time Reduction, Throughput Efficiency, Erp/Mrp Systems, Bom Accuracy, Routing Accuracy, Process Improvement, Analytical Skills, Problem Solving, Cross Functional Communication, Project Management
Specialization
Candidates must possess a Bachelor's degree in a relevant field like Industrial Engineering or Supply Chain Management, along with a minimum of 5 years of experience in production planning or scheduling, preferably within an Engineer-to-Order setting. Strong proficiency in ERP/MRP systems, capacity planning, and cross-functional coordination is essential.
Experience Required
Minimum 5 year(s)
Buyer at STATES MANUFACTURING CORPORATION
Dayton, Minnesota, United States - Full Time
Skills Needed
Purchase Order Management, Inventory Management, Supplier Relationship Management, Demand Forecasting, Erp Systems, Analytical Skills, Communication Skills, Negotiation Skills, Organizational Skills, Cost Containment, Lead Time Reduction, Data Analysis
Specialization
Candidates must possess a Bachelor's degree in business or 3 to 4 years of experience in sourcing, procurement, or purchasing, along with proficient knowledge of Microsoft Office, especially Excel. Essential attributes include strong analytical skills, attention to detail, professional business acumen, negotiation skills, and the ability to work independently.
Experience Required
Minimum 2 year(s)
Customer Experience Representative - Dunedin at Accident Compensation Corporation
Dunedin, Otago, New Zealand - Full Time
Skills Needed
Customer Focus, Personal Resilience, Verbal Communication, Written Communication, Adaptability, Working Under Pressure, Structured Environment Adherence, Inbound Call Handling, Email Support, Live Chat Support
Specialization
The ideal candidate must be customer-focused, possess personal resilience to manage challenging conversations, and have clear verbal and written communication skills. Adaptability and comfort working under pressure in a fast-paced, structured environment are also essential qualities.
Quality Inspector at STATES MANUFACTURING CORPORATION
Dayton, Minnesota, United States - Full Time
Skills Needed
Quality Inspection, Electrical Testing, Mechanical Inspection, Calibration, Root Cause Analysis, Iso 9001, Ul Standards, Schematic Reading, Technical Documentation, Lean Manufacturing, Multimeter, Hi Pot Testing, Calipers, Micrometers, Torque Wrenches, Erp Systems
Specialization
Candidates must have a high school diploma or GED and at least 2 years of manufacturing experience, preferably in electrical equipment production. Proficiency in reading electrical schematics and experience with quality tools and standards like UL and ISO 9001 are required.
Experience Required
Minimum 2 year(s)
Maintenance Machine Repair at Elyria Manufacturing Corporation
, Indiana, United States - Full Time
Skills Needed
Electrical Systems, Hydraulic Systems, Mechanical Systems, Pneumatic Systems, Preventive Maintenance, Troubleshooting, Diagnostics, Cnc Machines, Plc, Ladder Logic, Welding, Fabrication, Forklift Operation, Scissor Lift Operation, 5s Techniques
Specialization
Candidates should ideally possess 5 to 7 years of maintenance/machine repair experience in a manufacturing environment utilizing electro-mechanical equipment, along with a high school diploma or GED. Required knowledge includes CNC controls, hydraulics, pneumatics, PLCs, electrical systems, and the ability to troubleshoot using ladder logic and electrical diagrams.
Experience Required
Minimum 5 year(s)
Switchgear Assembler at STATES MANUFACTURING CORPORATION
Champlin, Minnesota, United States - Full Time
Skills Needed
Quality Control, Communication Skills, Hand Eye Coordination, Blueprint Reading, Technical Knowledge, Tape Measurer Usage, Power Hand Tools, Precision Measurement, Schematic Reading, Manual Dexterity
Specialization
Requires a high school diploma and the ability to read blueprints and use power tools. Candidates must possess strong manual dexterity and the ability to follow established assembly procedures.
After Sales Service Manager at Telstar Manufacturing Corporation
Derby, England, United Kingdom - Full Time
Skills Needed
Service Sales Management, Capital Equipment, Packaging Industry, Sap, Crm Systems, Commercial Drive, Entrepreneurial Mindset, Negotiation Skills, Maintenance Strategies, Operational Efficiencies, Time Management, Relationship Building, Strategic Planning, Data Driven Analysis, Forecasting
Specialization
Candidates must have at least 5 years of experience in service sales management within capital equipment or service operations. A degree in Engineering, Technical, or Business fields is required, along with proficiency in SAP and CRM systems.
Experience Required
Minimum 5 year(s)
Actuarial Analyst at AUTOMOBILE PROTECTION CORPORATION
Nocatee, Florida, United States - Full Time
Skills Needed
Pricing, Liability Estimates, Financial Projections, Data Compilation, Loss Experience Analysis, Rate Level Determination, Underwriting Request Preparation, Rate Card Creation, Exception Request Review, Profit Share Forecasts, Reserve Calculation, Testing Lead, Advanced Excel, Ms Office Suite, Sql, Powerbi
Specialization
Candidates must possess a Bachelor of Science degree in Actuarial Science, Mathematics, Statistics, or a related field, along with a minimum of two years of prior work experience in actuarial or risk management functions, preferably with vehicle service contracts. Proficiency in Advanced Excel and the MS Office suite is required, with knowledge of SQL and PowerBI being preferred.
Experience Required
Minimum 2 year(s)
Design Quality Assurance Engineer at Precision Optics Corporation Inc
Littleton, Massachusetts, United States - Full Time
Skills Needed
Quality Engineering, Design Control, Regulatory Compliance, Risk Management, Verification And Validation, Design Transfer, Training, Coaching, Documentation, Auditing, Root Cause Analysis, Capa, Microsoft Office 365, Electronic Qms, Plm, Erp
Specialization
Candidates should have over 5 years of quality engineering experience in medical device design and development, with familiarity in FDA and ISO standards. A bachelor's degree in engineering or a related field is required, along with relevant certifications preferred.
Experience Required
Minimum 5 year(s)
Thermal/Environmental Coating Engineer - Onsite at RAYTHEON TECHNOLOGIES CORPORATION
East Hartford, Connecticut, United States - Full Time
Skills Needed
Thermal Barrier Coatings, Environmental Barrier Coatings, Coating Development, Coating Characterization, Cvd, Thermal Spraying, Slurry Application, Plating, Metallography, Computational Modeling, Thermo Calc, Factsage, Process Optimization, Data Analysis, Lean, Six Sigma
Specialization
A Bachelor's degree in Material Science, Chemical Engineering, Applied Physics, or a related technical field with 5+ years of engineering experience (or 3+ years with an advanced degree) is required, along with a fundamental understanding of aerospace coating application methods. This role requires the candidate to be a U.S. Person due to government program requirements.
Experience Required
Minimum 5 year(s)
Milling - Machinist I-III - 2nd Shift at Daniels Manufacturing Corporation
Orlando, Florida, United States - Full Time
Skills Needed
Machine Setup, Programming, Troubleshooting, Tool Selection, Tolerance Control, Cutter Compensating, Blueprint Reading, Communication Skills, Lathes, Grinding, Turning, Multi Axis Machines, G Codes, M Codes
Specialization
Candidates must possess a minimum of one to two years of machining experience and demonstrate knowledge of Lathes, Grinding, Turning, and Multi Axis machines. Required qualifications include the ability to read blueprints, understand G & M codes, and possess strong communication skills.
NDT Inspector Level III (1st Shift)(Onsite) at RAYTHEON TECHNOLOGIES CORPORATION
Bridgeport, West Virginia, United States - Full Time
Skills Needed
Ndt Inspector Level Iii, Magnetic Particle Inspection (Mpi), Fluorescent Penetrant Inspection (Fpi), Technical Oversight, Procedure Development, Personnel Certification, Inspection Auditing, Turbine Engine Components, Aerospace Standards, Regulatory Compliance, Root Cause Analysis, Corrective Actions, Asnt Certification, Ut, Rt, Et
Specialization
Candidates must possess a High School Diploma or GED equivalent along with a minimum of 5+ years of NDT experience, including significant hands-on work in aerospace or manufacturing, and current or previous Level III certification in MPI and FPI under ASNT. U.S. citizenship is required due to program/contract access restrictions.
Experience Required
Minimum 5 year(s)
RN Case Manager, 7W, 40 Hours (Days / 4x10 Hour Shifts / Every 6th Weekend) at Boston Medical Center Corporation
Boston, Massachusetts, United States - Full Time
Skills Needed
Case Management, Utilization Review, Discharge Planning, Managed Care, Clinical Assessment, Medical Terminology, Care Coordination, Patient Advocacy, Data Management, Problem Solving, Communication, Negotiation, Icd 9 Coding, Cpt Coding, Interpersonal Skills
Specialization
Candidates must hold a current Massachusetts Registered Nurse license and have 3-5 years of clinical experience. A minimum of 1-3 years of recent acute inpatient Care Management experience is required, along with an ASN or BSN degree.
Experience Required
Minimum 2 year(s)
Front Desk Agent - Airport at Knightsbridge Capital Corporation
Greenough, Montana, United States - Full Time
Skills Needed
Guest Greeting, Professionalism, Hospitality, Communication, Reservation Management, Service Recovery, Transportation Logistics, Data Privacy, Confidentiality, Operational Excellence, Customer Service, Microsoft Office, Multi Tasking, Driving, Auditing
Specialization
Candidates need a minimum of two years of hospitality experience, preferably in a Front Office role, and must possess a valid State Driver's License for transportation duties. Required technical skills include proficiency with Microsoft Office, strong keyboard skills, and the ability to multitask efficiently in a fast-paced, high-demand environment.
Experience Required
Minimum 2 year(s)
Machinist Team Member - 2nd shift at RAYTHEON TECHNOLOGIES CORPORATION
Columbus, Georgia, United States - Full Time
Skills Needed
Machine Operation, Process Equipment Operation, Minor Maintenance, Tooling Setup, Blueprint Reading, Verbal Instruction Following, Written Instruction Following, Basic Shop Mathematics, Measurement Instruments Usage, Team Member Development
Specialization
Candidates must possess a High School Diploma or GED and fulfill the mandatory requirement of U.S. citizenship for program/contract access authorization. Preferred qualifications include 6 months of manufacturing/technical/military experience or completion of a Certified Manufacturing Specialist Program, along with one year of machine operator experience.