Y-Axis Jobs Logo
Send us feedback
telephone  +91 7670 800 001
Log in Sign up Try Premium

Jobs overseas

About 907395 results in (20) seconds Clear Filters

Jobs Search

About 907395 results in (20) seconds
Project Engineer III - Civil/Structural at Booth and Associates
Raleigh, North Carolina, United States - Full Time
Skills Needed
Civil Engineering, Electrical Engineering, Pls Cadd, Technical Reports, Design Evaluation, Field Visits, Client Interface, Project Management, Utility Projects, Engineering Standards, Documentation, Specifications, Material Lists, Labor Contracts, Nesc Requirements, Rus Requirements
Specialization
Candidates must have a B.S. degree in Civil or Electrical Engineering, with at least 4 years of applicable experience and a Professional Engineer (PE) license. Proficiency in PLS-CADD software is also required.
Experience Required
Minimum 5 year(s)
Registered Dietitian (RD)- Contract 4 HRS/Q at DININGRD
, Florida, United States - Full Time
Skills Needed
Registered Dietitian, Clinical Nutrition, Interpersonal Skills, Communication Skills, Nutrition Education, Consulting Experience, Policy Development, Nutritional Care Systems, Teamwork, Mentoring, Regulatory Compliance, Meal Rounds, Sanitation Best Practices, Task Prioritization, Professional Representation
Specialization
Candidates must have CDR credentials and a state license if required. Two years of consulting experience is preferred, particularly in Long Term Care, along with strong interpersonal and communication skills.
Experience Required
Minimum 2 year(s)
Registered Dietitian (RD)- Contract 4 HRS/Q at DININGRD
, Florida, United States - Full Time
Skills Needed
Clinical Nutrition, Interpersonal Skills, Communication Skills, Coaching, Mentoring, Nutritional Assessment, Regulatory Compliance, Policy Development
Specialization
Candidates must have CDR credentials and a state license if required. Two years of consulting experience is preferred, especially in Long Term Care.
Experience Required
Minimum 2 year(s)
Registered Dietitian (RD)- Contract 4 HRS/Q at DININGRD
, Florida, United States - Full Time
Skills Needed
Registered Dietitian, Clinical Nutrition, Nutrition Education, Interpersonal Skills, Communication Skills, Coaching, Mentoring, Regulatory Compliance, Nutritional Care Systems, Teamwork, Policy Development, Sanitation Best Practices, Meal Rounds, Mds, Nutritional Assessment
Specialization
Candidates must have CDR credentials and a state license if required. Two years of consulting experience is preferred, especially in Long Term Care, along with strong interpersonal and communication skills.
Experience Required
Minimum 2 year(s)
Associate, Shelter, Northern Colorado at Catholic Charities Archdiocese of Denver
Greeley, Colorado, United States - Full Time
Skills Needed
Crisis Management, Communication, Documentation, Teamwork, Problem Solving, Cultural Awareness, Confidentiality, Customer Service
Specialization
Candidates should have experience working with people in crisis and the ability to communicate effectively. A high school diploma or GED and 6 months to 1 year of related experience are required.
Steel Welder-No Weekends at BINFORD SUPPLY LLC
Balch Springs, Texas, United States - Full Time
Skills Needed
Mig Welding, Galvanized Steel, Blueprint Reading, Shop Drawings, Welding Tools, Grinders, Saws, Fabrication Equipment, Math Skills, Physical Workloads, Attention To Detail, Quality Commitment
Specialization
Candidates should have 2-3 years of welding or metal fabrication experience, preferably with MIG welding. They must also be able to read blueprints and have familiarity with standard welding tools and basic math skills.
Experience Required
Minimum 2 year(s)
Medical Social Worker - Hospice at Fairmont Homecare
Blairsville, Georgia, United States - Full Time
Skills Needed
Medical Social Work, Patient Care, Counseling, Assessment, Interdisciplinary Team Collaboration, Documentation, Community Resources, Crisis Management, Communication, Supervision, End Of Life Care, Grief Counseling, Advance Directives, Discharge Planning, Infection Control, Professional Development
Specialization
Candidates must hold a Master's degree in Social Work and be a licensed Medical Social Worker, with at least one year of experience in palliative care or hospice preferred. Knowledge of community resources and good interpersonal skills are essential.
BOX OFFICE CLERK at Fantasy Springs Resort Casino
Indio, California, United States - Full Time
Skills Needed
Cash Handling, Communication Skills, Customer Service, Bilingual, Guest Relations, Ticket Sales, Problem Solving, Time Management
Specialization
Candidates must have previous cash handling experience and excellent communication skills, with bilingual abilities being a plus. A high school diploma or GED is required, along with the ability to work evenings and weekends.
Shipping Clerk at Tarrytown Expocare LLC
Woodland Park, New Jersey, United States - Full Time
Skills Needed
Multi Tasking, Collaboration, Production Processes, Continuous Improvement, Sorting, Distribution, Following Instructions, Independence, English Proficiency
Specialization
Candidates should have the ability to multi-task and work collaboratively with the shipping team and pharmacists. A basic understanding of packaging and shipping processes is preferred, along with the ability to follow instructions and work independently.
Civil Engineering Intern, Infrastructure Design at Westwood Professional Services, Inc.
Austin, Texas, United States - Full Time
Skills Needed
Engineering Design Software, Technical Calculations, Autocad Civil3d, Microstation, Openroads, Microsoft Office Suite, Organizational Skills, Project Research, Field Work, Observation, Design Calculations, Quality Assurance, Exhibits Preparation, Basic Computations, Professional Development, Team Collaboration
Specialization
Candidates must be currently pursuing a Bachelor's degree in Civil Engineering and demonstrate a willingness to learn and accept new challenges. Basic knowledge of engineering design software and Microsoft Office products is required.
Civil Engineering Intern, Water Resources at Westwood Professional Services, Inc.
Fort Worth, Texas, United States - Full Time
Skills Needed
Engineering Design Software, Technical Calculations, Autocad Civil3d, Microstation, Openroads, Microsoft Office Suite, Organizational Skills, Field Work, Project Research, Data Accuracy, Exhibits Preparation, Basic Computations, Professional Development, Quality Responsibility, General Directions, Specialized Field Knowledge
Specialization
Candidates must be currently pursuing a Bachelor's degree in Civil Engineering and demonstrate a willingness to learn and accept new challenges. Basic knowledge of engineering design software and Microsoft Office products is also required.
Civil Engineering Intern, Infrastructure Design at Westwood Professional Services, Inc.
San Antonio, Texas, United States - Full Time
Skills Needed
Engineering Design Software, Technical Calculations, Autocad Civil3d, Microstation, Openroads, Microsoft Office Suite, Organizational Skills
Specialization
Candidates must be currently pursuing a Bachelor's degree in Civil Engineering and demonstrate a willingness to learn and accept new challenges. Basic knowledge of engineering design software and Microsoft Office products is also required.
Civil Engineering Intern, Infrastructure Design at Westwood Professional Services, Inc.
Fort Worth, Texas, United States - Full Time
Skills Needed
Engineering Design Software, Technical Calculations, Autocad Civil3d, Microstation, Openroads, Microsoft Office Suite, Organizational Skills, Field Work, Project Research, Data Accuracy, Exhibits Preparation, Lot Fits, Basic Computations, Professional Development, General Directions, Quality Responsibility
Specialization
Candidates must be currently pursuing a Bachelor's degree in Civil Engineering and demonstrate a willingness to learn and accept new challenges. Basic knowledge of engineering design software and Microsoft Office products is also required.
Manufacturing & Process Engineer at G and H Manufacturing
Houston, Texas, United States - Full Time
Skills Needed
Manufacturing Processes, Process Improvement, Lean Principles, Cnc Programming, Solidworks, 3d Printing, Quality Assurance, Data Analysis, Team Collaboration, Technical Documentation, Change Management, Communication Skills, Project Management, Equipment Design, Workflow Planning, Analytical Skills
Specialization
Candidates should have 5 to 7 years of experience in a similar role, with a strong background in modern manufacturing methods and hands-on experience on the shop floor. Proficiency in SolidWorks and experience with CNC equipment and process improvement are also required.
Experience Required
Minimum 5 year(s)
Discharge Planner (Credentialed) at Conifer Park Inc
Schenectady, New York, United States - Full Time
Skills Needed
Discharge Planning, Case Management, Patient Evaluation, Aftercare Programs, Clinical Assessments, Documentation, Psycho Education, Life Skills, Managed Care Reviews, Collaboration, Safety Oversight, Resource Utilization, Communication, Outreach, Treatment Planning, Relapse Prevention
Specialization
Candidates must have a high school diploma or higher in a related field and a relevant certification or license. Additionally, two years of experience in case management and discharge planning is required.
Experience Required
Minimum 2 year(s)
Lead Transmission Engineer at Westwood Professional Services, Inc.
Raleigh, North Carolina, United States - Full Time
Skills Needed
Transmission Design, Supervision, Engineering Principles, Electrical Codes, Safety Codes, Communication, Mentoring, Cost Estimation, Project Management, Technical Design, Nesc Standards, Asce Standards, Ieee Standards, Pls Cadd, Autocad, Ms Office
Specialization
Candidates must have a Bachelor's Degree in Civil/Structural or Electrical Engineering and an active PE license. Additionally, 10+ years of experience in Power Transmission Design is required.
Experience Required
Minimum 10 year(s)
Lead Transmission Engineer at Westwood Professional Services, Inc.
Lansdale, Pennsylvania, United States - Full Time
Skills Needed
Transmission Design, Supervision, Engineering Principles, Electrical Codes, Safety Codes, Mentoring, Communication, Project Management, Cost Estimation, Nesc Standards, Asce Standards, Ieee Standards, Pls Cadd, Autocad, Ms Office, Team Management
Specialization
Candidates must have a Bachelor's Degree in Civil/Structural or Electrical Engineering and an active PE licensure. Additionally, 10+ years of experience in Power Transmission Design is required.
Experience Required
Minimum 10 year(s)
Lead Transmission Engineer at Westwood Professional Services, Inc.
Lake Mary, Florida, United States - Full Time
Skills Needed
Transmission Design, Supervision, Cost Estimation, Engineering Principles, Electrical Codes, Safety Codes, Professional Communication, Mentoring, Collaboration, Nesc, Asce, Ieee, Pls Cadd, Autocad, Ms Office
Specialization
Candidates must have a Bachelor's Degree in Civil/Structural or Electrical Engineering and an active PE licensure, along with over 10 years of experience in Power Transmission Design. Advanced knowledge of transmission facilities and proficiency in relevant software are also required.
Experience Required
Minimum 10 year(s)
Lead Transmission Engineer at Westwood Professional Services, Inc.
Overland Park, Kansas, United States - Full Time
Skills Needed
Transmission Design, Supervision, Engineering Principles, Electrical Codes, Safety Codes, Cost Estimates, Project Management, Mentoring, Communication, Collaboration, Nesc Standards, Asce Standards, Ieee Standards, Pls Cadd, Autocad, Ms Office
Specialization
Candidates must have a Bachelor's Degree in Civil/Structural or Electrical Engineering and an active PE licensure. Additionally, 10+ years of experience in Power Transmission Design is required, along with proficiency in relevant software and industry standards.
Experience Required
Minimum 10 year(s)
Civil Graduate Engineer, Infrastructure Design at Westwood Professional Services, Inc.
Fort Worth, Texas, United States - Full Time
Skills Needed
Autocad Civil 3d, Openroads, Microstation, Technical Calculations, Construction Drawings, Project Management, Communication Skills, Team Collaboration, Detail Oriented, Problem Solving, Microsoft Office Suite, Engineering Reports, Feasibility Studies, Utility Evaluations, Grading Plans, Contract Documents
Specialization
A Bachelor's Degree in Civil or Environmental Engineering is required, or the ability to obtain it within 6-12 months. An Engineer-in-Training Certificate is also required, or the ability to obtain it within the same timeframe.
Project Engineer III - Civil/Structural at Booth and Associates
Raleigh, North Carolina, United States -
Full Time

Start Date

Immediate

Expiry Date

22 Apr, 26

Salary

0.0

Posted On

22 Jan, 26

Experience

5 year(s) or above

Remote Job

Yes

Telecommute

Yes

Sponsor Visa

No

Skills

Civil Engineering, Electrical Engineering, PLS-CADD, Technical Reports, Design Evaluation, Field Visits, Client Interface, Project Management, Utility Projects, Engineering Standards, Documentation, Specifications, Material Lists, Labor Contracts, NESC Requirements, RUS Requirements

Industry

Utilities

Description
Description Project Engineer III is a position within the Transmission Department to perform electric utility-related engineering tasks and provide technical expertise to solve design problems under minimal supervision. Incumbents are expected to perform a variety of complex tasks, delegating and reviewing routine tasks through Project Engineer I’s and II’s, as well as Engineering Technician I’s and II’s. These tasks deliver sealed drawings, specifications, and contracts to Booth’s clients. The expected level of supervision of a candidate will be based on their years of experience and qualifications. We are looking to fill this position for the following offices: Baltimore, Baton Rouge, Charlotte, Katy, Raleigh, and Summerville. Requirements Proficiency in RUS and NESC requirements. Design and evaluate transmission and distribution overhead power lines utilizing PLS-CADD software to ensure that the needs of the Client are met in the most economical and effective manner. Models are built from the ground up or are minor revisions to existing models. Prepare thorough and accurate technical reports, correspondence, documentation, calculations, and sketches. Prepare sealed engineering plans, specifications, material lists, and labor contracts for utility projects. Assist in the continued development of both Company and Client standards to provide guidelines for future project planning and design. Must interface well with Clients, Vendors, Representatives, and Employees at all levels. Perform field/site visits to design, observe, and inspect projects with a more senior team member. Travel is required for this position on an as-needed basis. The above statements describe the general nature and level of work being performed by individuals assigned to this classification. This is not intended to be an exhaustive list of all responsibilities and duties required of personnel so classified. Perform other related duties incidental to the work described herein. Minimum Qualifications: B.S. degree in Civil or Electrical Engineering required. 4+ years of applicable experience required. PE required. Proficiency in PLS-CADD software. #LI-AT1 #LI-AP1
Responsibilities
The Project Engineer III will perform electric utility-related engineering tasks and provide technical expertise to solve design problems. They will also delegate and review tasks performed by junior engineers and technicians.
Project Engineer III - Civil/Structural at Booth and Associates
Raleigh, North Carolina, United States - Full Time
Skills Needed
Civil Engineering, Electrical Engineering, Pls Cadd, Technical Reports, Design Evaluation, Field Visits, Client Interface, Project Management, Utility Projects, Engineering Standards, Documentation, Specifications, Material Lists, Labor Contracts, Nesc Requirements, Rus Requirements
Specialization
Candidates must have a B.S. degree in Civil or Electrical Engineering, with at least 4 years of applicable experience and a Professional Engineer (PE) license. Proficiency in PLS-CADD software is also required.
Experience Required
Minimum 5 year(s)
Registered Dietitian (RD)- Contract 4 HRS/Q at DININGRD
, Florida, United States - Full Time
Skills Needed
Registered Dietitian, Clinical Nutrition, Interpersonal Skills, Communication Skills, Nutrition Education, Consulting Experience, Policy Development, Nutritional Care Systems, Teamwork, Mentoring, Regulatory Compliance, Meal Rounds, Sanitation Best Practices, Task Prioritization, Professional Representation
Specialization
Candidates must have CDR credentials and a state license if required. Two years of consulting experience is preferred, particularly in Long Term Care, along with strong interpersonal and communication skills.
Experience Required
Minimum 2 year(s)
Registered Dietitian (RD)- Contract 4 HRS/Q at DININGRD
, Florida, United States - Full Time
Skills Needed
Clinical Nutrition, Interpersonal Skills, Communication Skills, Coaching, Mentoring, Nutritional Assessment, Regulatory Compliance, Policy Development
Specialization
Candidates must have CDR credentials and a state license if required. Two years of consulting experience is preferred, especially in Long Term Care.
Experience Required
Minimum 2 year(s)
Registered Dietitian (RD)- Contract 4 HRS/Q at DININGRD
, Florida, United States - Full Time
Skills Needed
Registered Dietitian, Clinical Nutrition, Nutrition Education, Interpersonal Skills, Communication Skills, Coaching, Mentoring, Regulatory Compliance, Nutritional Care Systems, Teamwork, Policy Development, Sanitation Best Practices, Meal Rounds, Mds, Nutritional Assessment
Specialization
Candidates must have CDR credentials and a state license if required. Two years of consulting experience is preferred, especially in Long Term Care, along with strong interpersonal and communication skills.
Experience Required
Minimum 2 year(s)
Associate, Shelter, Northern Colorado at Catholic Charities Archdiocese of Denver
Greeley, Colorado, United States - Full Time
Skills Needed
Crisis Management, Communication, Documentation, Teamwork, Problem Solving, Cultural Awareness, Confidentiality, Customer Service
Specialization
Candidates should have experience working with people in crisis and the ability to communicate effectively. A high school diploma or GED and 6 months to 1 year of related experience are required.
Steel Welder-No Weekends at BINFORD SUPPLY LLC
Balch Springs, Texas, United States - Full Time
Skills Needed
Mig Welding, Galvanized Steel, Blueprint Reading, Shop Drawings, Welding Tools, Grinders, Saws, Fabrication Equipment, Math Skills, Physical Workloads, Attention To Detail, Quality Commitment
Specialization
Candidates should have 2-3 years of welding or metal fabrication experience, preferably with MIG welding. They must also be able to read blueprints and have familiarity with standard welding tools and basic math skills.
Experience Required
Minimum 2 year(s)
Medical Social Worker - Hospice at Fairmont Homecare
Blairsville, Georgia, United States - Full Time
Skills Needed
Medical Social Work, Patient Care, Counseling, Assessment, Interdisciplinary Team Collaboration, Documentation, Community Resources, Crisis Management, Communication, Supervision, End Of Life Care, Grief Counseling, Advance Directives, Discharge Planning, Infection Control, Professional Development
Specialization
Candidates must hold a Master's degree in Social Work and be a licensed Medical Social Worker, with at least one year of experience in palliative care or hospice preferred. Knowledge of community resources and good interpersonal skills are essential.
BOX OFFICE CLERK at Fantasy Springs Resort Casino
Indio, California, United States - Full Time
Skills Needed
Cash Handling, Communication Skills, Customer Service, Bilingual, Guest Relations, Ticket Sales, Problem Solving, Time Management
Specialization
Candidates must have previous cash handling experience and excellent communication skills, with bilingual abilities being a plus. A high school diploma or GED is required, along with the ability to work evenings and weekends.
Shipping Clerk at Tarrytown Expocare LLC
Woodland Park, New Jersey, United States - Full Time
Skills Needed
Multi Tasking, Collaboration, Production Processes, Continuous Improvement, Sorting, Distribution, Following Instructions, Independence, English Proficiency
Specialization
Candidates should have the ability to multi-task and work collaboratively with the shipping team and pharmacists. A basic understanding of packaging and shipping processes is preferred, along with the ability to follow instructions and work independently.
Civil Engineering Intern, Infrastructure Design at Westwood Professional Services, Inc.
Austin, Texas, United States - Full Time
Skills Needed
Engineering Design Software, Technical Calculations, Autocad Civil3d, Microstation, Openroads, Microsoft Office Suite, Organizational Skills, Project Research, Field Work, Observation, Design Calculations, Quality Assurance, Exhibits Preparation, Basic Computations, Professional Development, Team Collaboration
Specialization
Candidates must be currently pursuing a Bachelor's degree in Civil Engineering and demonstrate a willingness to learn and accept new challenges. Basic knowledge of engineering design software and Microsoft Office products is required.
Civil Engineering Intern, Water Resources at Westwood Professional Services, Inc.
Fort Worth, Texas, United States - Full Time
Skills Needed
Engineering Design Software, Technical Calculations, Autocad Civil3d, Microstation, Openroads, Microsoft Office Suite, Organizational Skills, Field Work, Project Research, Data Accuracy, Exhibits Preparation, Basic Computations, Professional Development, Quality Responsibility, General Directions, Specialized Field Knowledge
Specialization
Candidates must be currently pursuing a Bachelor's degree in Civil Engineering and demonstrate a willingness to learn and accept new challenges. Basic knowledge of engineering design software and Microsoft Office products is also required.
Civil Engineering Intern, Infrastructure Design at Westwood Professional Services, Inc.
San Antonio, Texas, United States - Full Time
Skills Needed
Engineering Design Software, Technical Calculations, Autocad Civil3d, Microstation, Openroads, Microsoft Office Suite, Organizational Skills
Specialization
Candidates must be currently pursuing a Bachelor's degree in Civil Engineering and demonstrate a willingness to learn and accept new challenges. Basic knowledge of engineering design software and Microsoft Office products is also required.
Civil Engineering Intern, Infrastructure Design at Westwood Professional Services, Inc.
Fort Worth, Texas, United States - Full Time
Skills Needed
Engineering Design Software, Technical Calculations, Autocad Civil3d, Microstation, Openroads, Microsoft Office Suite, Organizational Skills, Field Work, Project Research, Data Accuracy, Exhibits Preparation, Lot Fits, Basic Computations, Professional Development, General Directions, Quality Responsibility
Specialization
Candidates must be currently pursuing a Bachelor's degree in Civil Engineering and demonstrate a willingness to learn and accept new challenges. Basic knowledge of engineering design software and Microsoft Office products is also required.
Manufacturing & Process Engineer at G and H Manufacturing
Houston, Texas, United States - Full Time
Skills Needed
Manufacturing Processes, Process Improvement, Lean Principles, Cnc Programming, Solidworks, 3d Printing, Quality Assurance, Data Analysis, Team Collaboration, Technical Documentation, Change Management, Communication Skills, Project Management, Equipment Design, Workflow Planning, Analytical Skills
Specialization
Candidates should have 5 to 7 years of experience in a similar role, with a strong background in modern manufacturing methods and hands-on experience on the shop floor. Proficiency in SolidWorks and experience with CNC equipment and process improvement are also required.
Experience Required
Minimum 5 year(s)
Discharge Planner (Credentialed) at Conifer Park Inc
Schenectady, New York, United States - Full Time
Skills Needed
Discharge Planning, Case Management, Patient Evaluation, Aftercare Programs, Clinical Assessments, Documentation, Psycho Education, Life Skills, Managed Care Reviews, Collaboration, Safety Oversight, Resource Utilization, Communication, Outreach, Treatment Planning, Relapse Prevention
Specialization
Candidates must have a high school diploma or higher in a related field and a relevant certification or license. Additionally, two years of experience in case management and discharge planning is required.
Experience Required
Minimum 2 year(s)
Lead Transmission Engineer at Westwood Professional Services, Inc.
Raleigh, North Carolina, United States - Full Time
Skills Needed
Transmission Design, Supervision, Engineering Principles, Electrical Codes, Safety Codes, Communication, Mentoring, Cost Estimation, Project Management, Technical Design, Nesc Standards, Asce Standards, Ieee Standards, Pls Cadd, Autocad, Ms Office
Specialization
Candidates must have a Bachelor's Degree in Civil/Structural or Electrical Engineering and an active PE license. Additionally, 10+ years of experience in Power Transmission Design is required.
Experience Required
Minimum 10 year(s)
Lead Transmission Engineer at Westwood Professional Services, Inc.
Lansdale, Pennsylvania, United States - Full Time
Skills Needed
Transmission Design, Supervision, Engineering Principles, Electrical Codes, Safety Codes, Mentoring, Communication, Project Management, Cost Estimation, Nesc Standards, Asce Standards, Ieee Standards, Pls Cadd, Autocad, Ms Office, Team Management
Specialization
Candidates must have a Bachelor's Degree in Civil/Structural or Electrical Engineering and an active PE licensure. Additionally, 10+ years of experience in Power Transmission Design is required.
Experience Required
Minimum 10 year(s)
Lead Transmission Engineer at Westwood Professional Services, Inc.
Lake Mary, Florida, United States - Full Time
Skills Needed
Transmission Design, Supervision, Cost Estimation, Engineering Principles, Electrical Codes, Safety Codes, Professional Communication, Mentoring, Collaboration, Nesc, Asce, Ieee, Pls Cadd, Autocad, Ms Office
Specialization
Candidates must have a Bachelor's Degree in Civil/Structural or Electrical Engineering and an active PE licensure, along with over 10 years of experience in Power Transmission Design. Advanced knowledge of transmission facilities and proficiency in relevant software are also required.
Experience Required
Minimum 10 year(s)
Lead Transmission Engineer at Westwood Professional Services, Inc.
Overland Park, Kansas, United States - Full Time
Skills Needed
Transmission Design, Supervision, Engineering Principles, Electrical Codes, Safety Codes, Cost Estimates, Project Management, Mentoring, Communication, Collaboration, Nesc Standards, Asce Standards, Ieee Standards, Pls Cadd, Autocad, Ms Office
Specialization
Candidates must have a Bachelor's Degree in Civil/Structural or Electrical Engineering and an active PE licensure. Additionally, 10+ years of experience in Power Transmission Design is required, along with proficiency in relevant software and industry standards.
Experience Required
Minimum 10 year(s)
Civil Graduate Engineer, Infrastructure Design at Westwood Professional Services, Inc.
Fort Worth, Texas, United States - Full Time
Skills Needed
Autocad Civil 3d, Openroads, Microstation, Technical Calculations, Construction Drawings, Project Management, Communication Skills, Team Collaboration, Detail Oriented, Problem Solving, Microsoft Office Suite, Engineering Reports, Feasibility Studies, Utility Evaluations, Grading Plans, Contract Documents
Specialization
A Bachelor's Degree in Civil or Environmental Engineering is required, or the ability to obtain it within 6-12 months. An Engineer-in-Training Certificate is also required, or the ability to obtain it within the same timeframe.