Project Specialist

at  Goodyear

Greater Napanee, ON, Canada -

Start DateExpiry DateSalaryPosted OnExperienceSkillsTelecommuteSponsor Visa
Immediate25 Dec, 2024Not Specified27 Sep, 20244 year(s) or aboveCompressed Air,Budgeting,Influence Others,Wiring Diagrams,Specifications,Dignity,Gas,Steam,Welding,Valves,Leveling,Team Performance,Lubrication,Alternative Solutions,Luxembourg,Process Equipment,It,Flow Diagrams,Control Logic,Pumps,Hydraulics,DisabilitiesNoNo
Add to Wishlist Apply All Jobs
Required Visa Status:
CitizenGC
US CitizenStudent Visa
H1BCPT
OPTH4 Spouse of H1B
GC Green Card
Employment Type:
Full TimePart Time
PermanentIndependent - 1099
Contract – W2C2H Independent
C2H W2Contract – Corp 2 Corp
Contract to Hire – Corp 2 Corp

Description:

EDUCATION:

Bachelor’s degree or relevant experience.
Relevant experience, and preferably trade certifications (e.g. millwright or electrician)

EXPERIENCE:

  • 4+ years’ experience w/degree or 9+ years equivalent experience w/o degree.
  • Continual learner as evidence by application of knowledge, gained through additional education/experience/training.
  • Experience in cross functional assignment or project.
  • Participate on cross-functional assignments, projects, and other divisional and planned initiatives for improved self-development.

KNOWLEDGE:

  • Demonstrate and instill positive attitudes on peers. Demonstrate ability to plan and lead meetings at work group level. Initiate open dialogue. Offer constructive disagreement. Offer alternative solutions. Provide compelling technical direction and logical conclusions.
  • Achieve high quality results. Hold self accountable for team performance. Influence others and assume management of assigned sub-projects. Address risk in assembling effective strategies. Drive positive change. Be aware of competitor capabilities. Participate in meetings with outside agancies and customers. Provide meaningful feedback and mentoring.

Mechanical Systems:(preferred)

  • Thorough understanding of equipment rigging, leveling, alignment, grouting, welding, and commissioning procedures
  • Ability to read piping schematics and flow diagrams.
  • Knowledge of environmental concerns and requirements
  • Industrial piping, pumps, valves, and instrumentation for water, gas, hydraulics, pneumatics, steam, compressed air, and lubrication
  • Fire protection piping and systems.
  • Process ventilation and cooling, including humidity-controlled systems.
  • Dust collector systems.
  • Familiarity with industry and government specifications and standards for the above types of systems.

Electrical Systems:(preferred)

  • Medium and low-voltage drives and machine control systems.
  • Pneumatic and hydraulic control systems.
  • Vision systems for guiding and tracking materials.
  • Gauging systems.
  • Barcoding systems.
  • Safety systems.
  • Ability to read and interpret single-line wiring diagrams, schematic wiring diagrams, electrical equipment location drawings, plan drawings, installation detail drawings, PLC control logic, etc.
  • Ability to verify electrical drawings and installations for compliance with Goodyear, industry, and government standards and specifications.
  • Ability to develop testing requirements and lead electrical equipment checkout, startup, and troubleshooting.
  • Familiarity with industry and government specifications and standards for the above types of systems.
  • Experience with process equipment, preferably Tire or Rubber machinery.
  • Good understanding of safe work practices and proper workmanship
  • Ability to demonstrate effective teamwork, maintain a professional demeanor, and foster positive relationships inside and outside the team.
  • Budgeting and capital forecasting experience.
  • Familiarity with Gantt chart scheduling and software, as well as identification and mitigation of schedule risks.
  • Experienced user of AutoCAD two-dimensional drafting software.

Please note that this is a project position which is required for the duration of an ongoing capital project with an expected duration of approximately 2 years. There is a potential for permanent employment at the end of the project based on a variety of factors including job performance and availability of suitable permanent openings. There is no promise of permanent employment upon the completion of the project

LI-HR1

Goodyear is one of the world’s largest tire companies. It employs about 74,000 people and manufactures its products in 57 facilities in 23 countries around the world. Its two Innovation Centres in Akron, Ohio and Colmar-Berg, Luxembourg strive to develop state-of-the-art products and services that set the technology and performance standard for the industry.
For more information about Goodyear and its products, go to www.goodyear.com/corporate
Goodyear is proud to offer equal employment opportunities where everyone is treated with respect and dignity. We welcome and encourage applications from people with disabilities. If you have a disability or special need that requires accommodation at any time during the application or recruitment process, please let us know. Accommodations are available on request for candidates taking part in all aspects of the selection process

Responsibilities:

THE PRIMARY PURPOSE OF THE POSITION:

The Project Specialist will lead a small team to oversee the installation, commissioning, and start-up of process equipment in the plant. The Specialist will manage and motivate contractors to complete the work on time, on budget, and according to specifications, and will process field changes, communicate with others, and resolve technical questions. In most cases, machine OEM engineer(s) will also be on site to provide technical support. The candidate will work in a construction environment under the direction of the Global Engineering Construction Manager.

PRINCIPLE DUTIES AND RESPONSIBILITIES:

  • Manage risks and ensure that contractors complete the electrical and mechanical work safely, to specification, on time, and on-budget.
  • Participate in installation bid package preparation, contractor qualification, and the pre-construction preparation process.
  • Thoroughly understand the equipment installation sequencing, assembly details, budget estimate, job scope, and schedule.
  • Read and understand all manufacturer assembly drawings and instructions for equipment installation, bid packages, and construction packages, including scopes of work, specifications, and drawings.
  • Lead daily contractor meetings.
  • Effectively manage communications between the contractor, Goodyear corporate engineers, and others to coordinate the work and resolve issues.
  • Conduct weekly calls with the GE process team and issue meeting minutes.
  • Assure that all installations meet GE requirements and standards.
  • Check key deliverables such as scope of supply, quality, workmanship, and functionality to ensure that systems are ready for use.
  • Perform administrative tasks including scheduling, budget management & cost control, issuance of weekly reports, parts management, etc.
  • Review and approve progress invoices and change requests.
  • Verify that all equipment drawings, operation & maintenance manuals, and spare part lists have been received.
  • Coordinate commissioning activities with the contractors, equipment suppliers, GE engineers, and the plant operations team.
  • Coordinate equipment commissioning activities with data management systems for production tracking and monitoring.
  • Support the PSO (Process Sign-Off) for assigned equipment and manage punch lists.
  • Collect and maintain “as-built” information to reflect any changes made during construction.
  • Standard working time will be 5 days per week during construction. Other hours may be required to meet deadlines or during the start-up and testing of new systems.


REQUIREMENT SUMMARY

Min:4.0Max:9.0 year(s)

Electrical/Electronic Manufacturing

Engineering Design / R&D

Other

Graduate

Proficient

1

Greater Napanee, ON, Canada