Nanofabrication Engineer - Open Rank (Entry-Junior Level)-EOSL-Onsite

at  Georgia Tech Research Institute

OVERVIEW:

The Georgia Tech Research Institute (GTRI) is the nonprofit, applied research division of the Georgia Institute of Technology (Georgia Tech). Founded in 1934 as the Engineering Experiment Station, GTRI has grown to more than 2,900 employees, supporting eight laboratories in over 20 locations around the country and performing more than $940 million of problem-solving research annually for government and industry. GTRI’s renowned researchers combine science, engineering, economics, policy, and technical expertise to solve complex problems for the U.S. federal government, state, and industry.

PROJECT/UNIT DESCRIPTION

The Photonics & Microelectronics Division (PMD) in the Electro-Optical Systems Laboratory (EOSL) of GTRI is searching for an early-career Nanofabrication Engineer willing and able to work on multiple projects within the Division, as the need arises, including laboratory experimentation as well as modeling of experimental data. The Photonics and Microelectronics Division currently performs advanced research and development that involves the development & packaging of new materials and micro-electronic device technologies, spacecraft hardware, photonic integrated circuits, and RF/millimeter-wave devices. The components and sub-systems are used in a variety of systems and applications, primarily for aerospace and national security platforms. The successful candidate will support the GTRI research portfolio in the areas of advanced materials fabrication and characterization, advanced packaging and reliability, thin film deposition, and heterogeneous material integration and testing.
The PMD team is skilled in the synthesis and deposition of advanced materials and semiconductors; materials physics and chemistry; weathering of materials in space; design, simulation, fabrication, packaging and measurement of RF and photonic ICs and subsystems, fiber optics & comms, and building optical & RF subsystems with both discrete components & ICs. PMD is a leader in the Georgia Tech Microelectronics community as well as the Space Technology community. GTRI offers a dynamic, collaborative environment, where research faculty generate new ideas for projects to serve the needs of the warfighter, with opportunities to perform on projects outside their division to broaden their knowledge & experience.

REQUIRED MINIMUM QUALIFICATIONS

• B.S. degree in materials science & engineering, electrical engineering, physics, applied physics, microelectronics, mechanical engineering, or similar field
• Hands on experience with mechanical, diffusion, cryo and turbo-pumped vacuum systems, and chillers;
• Hands-on experience with the techniques/equipment for the deposition/growth of thin film materials, such as DC/RF sputtering, thermal and e-beam evaporation, molecular beam epitaxy, and/or atomic layer deposition equipment.
• Laboratory and computer skills as demonstrated in independent undergrad projects, master’s thesis research, laboratory internships, doctoral research, etc.
• Strong coursework foundation in materials, chemistry, and physics
• Strong programming skills in common software / simulation tools such as Python, Matlab etc.
• Knowledge of semiconductor fabrication techniques or device physics
• Conversant with material and device characterization techniques/equipment/metrology (such as optical/electron microscopy, electrical/optical parameters analysis, physical morphology)
• Strong sense of curiosity in both the technical and non-technical aspects of working in applied research.
• Ability to obtain and maintain a DoD Secret Security Clearance.

PREFERRED QUALIFICATIONS

• Active Secret Clearance
• Experience fabricating, packaging, characterizing active microelectronic devices such as LEDs, transistors, lasers, photodetectors, photovoltaics, in CMOS, III-V, II-VI, etc.
• Experience fabricating, packaging, and characterizing IR materials such as HgCdTe, GaSb, etc. for sensor / FPA applications
• Experience fabricating, packaging and characterizing GaAs / GaN / GaO / diamond devices for RF and/or optical applications
• Characterization and test of bare die in a probe station, load-pull measurements
• Ability to clearly communicate technical ideas to a non-technical audience

TRAVEL REQUIREMENTS

<10% travel

EDUCATION AND LENGTH OF EXPERIENCE

This position vacancy is an open-rank announcement. The final job offer will be dependent on candidate qualifications in alignment with Research Faculty Extension Professional ranks as outlined in section 3.2.1 of the Georgia Tech Faculty Handbook

• 0-8+ years of related experience with a Bachelor’s degree in Materials Science and Engineering, Microelectronics, Electrical Engineering, Applied Physics, Mechanical Engineering, or closely related discipline
• 0-6+ years of related experience with a Masters’ degree in Materials Science and Engineering, Microelectronics, Electrical Engineering, Applied Physics, Mechanical Engineering, or closely related discipline
• 0-3+ years of related experience with a Ph.D. in Materials Science and Engineering, Microelectronics, Electrical Engineering, Applied Physics, Mechanical Engineering, or closely related discipline

Please refer to our Research Faculty Technical Level Guidelines for minimum requirements at the higher levels.

U.S. CITIZENSHIP REQUIREMENTS

Due to our research contracts with the U.S. federal government, candidates for this position must be U.S. Citizens.

JOB PURPOSE

Nanofabrication research engineer to research and contribute to the design, fabrication, synthesis, characterization, packaging, and testing of nano-fabricated devices and structures for projects such as DNA data storage, quantum sensing and computing, and microelectronics. This may also include delivery of prototype devices. This position involves close collaboration with a highly technical team of research leaders to accomplish task and program objectives, contribute technically to proposal ideation, and conceive and execute internal research efforts refining core fabrication processes and capabilities. Fabrication responsibilities range from process design and supervision to full clean-room implementation, and will utilize a wide range of bulk and micro/nano synthesis/fabrication tools and develop novel techniques to create novel materials, devices, and structures with new properties.

KEY RESPONSIBILITIES

• Perform basic tests, experiments, calculations, and/or simulations to determine physical parameters/properties and behaviors of materials and systems and conduct basic data analysis on the results of measurements and/or simulations
• Perform literature surveys on research topics
• Generate documentation of experiments and results

ADDITIONAL RESPONSIBILITIES

• Perform thin film deposition of advanced engineered materials.
• Growth/deposition of inorganic/organic thin film materials by various a range of techniques
• Analyze and characterize various materials and devices for aerospace and national security applications.
• Work with common electronic packaging equipment such as: lithography, etching, dicing saws, wire bonders, flip-chipping, etc.
• Learn & practice advanced packaging techniques to manage RF and thermal challenges with devices and integrated circuits
• Conduct failure analysis of packaged devices and recommend mitigations
• Model and simulate optical & RF devices and structures
• Assist in other activities as directed.