Electrical, Controls and Instrumentation (EC&I) Technician

at  NAES Corporation

Located in Newport, UK, the Severn Power Station stands as a vital hub of energy production, harnessing the power of its surroundings to generate 823 MW of electricity. Equipped with two units of SGT5-4000F gas turbines and SST5-5000 steam turbines, it epitomises the pinnacle of gas-fired Combined Cycle Gas Turbine (CCGT) technology. Serving as a cornerstone of the local energy infrastructure, it ensures a reliable and sustainable power supply for the region.
The Electrical, Control & Instrumentation (EC&I) Technician is a key member of the EC&I Maintenance team, you will be responsible for all reactive and proactive maintenance across a variety of critical systems within the power station.

PHYSICAL REQUIREMENTS AND WORKING CONDITIONS

Physical requirements include the possibility of standing for extended periods of time, stair and ladder climbing, routinely lifting up to 15 kg, and when necessary, use a respirator.
Protective equipment must be worn in the performance of some duties (e.g., hard hats, safety glasses, air masks, ear protection, chemical suits, gloves, and high voltage protective equipment etc.). Working with hazardous materials may be required. There are extensive smoking restrictions in and around the facility.

TECHNICAL KNOWLEDGE, SKILLS AND EXPERIENCE

• Recognised apprenticeship in an I&C/Process Control or similar discipline and at least 2 years of experience post apprenticeship within the Power Generation sector or similar heavy/process industry.
• BTEC ONC/HNC or equivalent NVQ level (I&C/Control preferred).
• BS7671 18th Edition Wiring Regulations and BS2391 (desirable).
• CompEx 01-04 (desirable).
• Excellent knowledge and experience of modern Distributed Control Systems (DCS), Siemens S7 controllers and periphery, automatic fire detection systems, process control and various process instrumentation (temperature, pressure, flow).
• Ideally some knowledge and experience maintaining electrical assets including motors, switchgear, transformers and other HV plant, UPS emergency power systems and electrical protection.
• Preferably an IOSH or NEBOSH qualification.
• Conversant with the use of a Computerised Maintenance Management System.
• Proven experience of Safe Systems of Work.
• Good planning and co-ordination skills.
• Excellent communication skills with the ability to build positive relationships with others.
• Able to work flexibly to meet the needs of the business.
• Ability to work on own initiative.
• Attention to detail.
• The highest regard for Health, Safety and Environmental compliance.

EXPERIENCE

Preferred

• Recognised apprenticeship in an I&C/Process Control or similar discipline and at least 2 years of experience post apprenticeship within the Power Generation sector or similar heavy/process industry.
• BTEC ONC/HNC or equivalent NVQ level (I&C/Control preferred).
• BS7671 18th Edition Wiring Regulations and BS2391 (desirable).
• CompEx 01-04 (desirable).
• Excellent knowledge and experience of modern Distributed Control Systems (DCS), Siemens S7 controllers and periphery, automatic fire detection systems, process control and various process instrumentation (temperature, pressure, flow).
• Ideally some knowledge and experience maintaining electrical assets including motors, switchgear, transformers and other HV plant, UPS emergency power systems and electrical protection.
• Preferably an IOSH or NEBOSH qualification.
• Conversant with the use of a Computerised Maintenance Management System.
• Proven experience of Safe Systems of Work.
• Good planning and co-ordination skills.
• The highest regard for Health, Safety and Environmental compliance.

EDUCATION

Preferred

• Technical/other training or better in Instrumentation & Control Technology or related field

SKILLS

Preferred

• IC&E - Electric, Instrument &Cnrls
• Electrical Engineering
• Electrical Controls
• Electrical Systems
• Voltages up to 4160 Volts
• DCS - Distributed Control System
• Equipment Repair
• Root Cause Analysis
• Troubleshooting

KEY DUTIES AND RESPONSIBILITIES

• Comply with Site Quality Procedures, Work Instructions, and EHS Policies and Procedures.
• Diagnose systems and equipment problems. Execute routine and non-routine maintenance activities in accordance with agreed procedures and operational requirements to ensure plant is operating safely, effectively, and efficiently. Ensure safe working practices and procedures are adhered to within the work area.
• Carry out first line maintenance activities, with response to emergency / unscheduled situations in the event of abnormal incidents to protect plant and personnel ensuring compliancy with safety and environmental policies.
• Investigate complex technical problems relating to critical plant, identify, diagnose, and report defects within the plant utilising the Maintenance Management system. Resolve defects whilst maintaining station performance and meeting operational targets by returning plant to normal operating service.
• Manage work orders, risk assessment and method statements to safely control work.
• Help in the production of sub-contractor work scopes.
• Coordinate outage work scopes and packages.
• Provide callout cover in the event of equipment failures.
• Manage and supervise contractors to complete maintenance as required.
• Preparing work method statements, risk assessment and / or plant operating instructions ensuring the required level of maintenance to asset is achieved and records maintained.
• Prepare work orders, ordering spares, completing risk assessments and identification of resources.
• Provides Service Support function to the Operations department and ensure defects and status of any maintenance activity is effectively communicated to the shift teams.
• Support the delivery of low contracts, monitoring performance and review with direction and support of the E,C&I Engineer.

OTHER REASONABLE DUTIES

• Capable of carrying out the duties of an Authorised Person under the site safety rules.
• Any other duties as directed by the E,C&I Engineer or Engineering Manager as are deemed to be within his/her capabilities.
• The E,C&I Technician is responsible for the Health and Safety of him/her-self, any contractors working under his/her direction and in accordance with the Health and Safety at Work Act 1974.